35.220.20 - Magnetic storage devices in general
ICS 35.220.20 Details
Magnetic storage devices in general
Magnetische Speichermedien
Mémoires magnétiques en général
Magnetne shranjevalne naprave na splošno
General Information
This document defines the LTFS Format requirements for interchanged media that claims LTFS compliance. Those requirements are specified as the size and sequence of data blocks and file marks on the media, the content and form of special data constructs (the LTFS Label and LTFS Index), and the content of the partition labels and use of MAM parameters. The data content (not the physical media) of the LTFS format shall be interchangeable among all data storage systems claiming conformance to this format. Physical media interchange is dependent on compatibility of physical media and the media access devices in use. NOTE: This document does not contain instructions or tape command sequences to build the LTFS structure.
- Standard84 pagesEnglish languagesale 15% off
- Standard84 pagesEnglish languagesale 15% off
IEC/TR 62291:2009(E) specifies an application program interface (API) for reading and writing the files which conform to the Universal Disk Format (UDF) ® specification revision 2.00 developed by the Optical Storage Technology Association (OSTA) and its security extension. This second edition cancels and replaces the first edition, published in 2002, and constitutes a technical revision. The significant changes with respect to the first edition are the following:
- reference document ISO/IEC 9945-1:1990 is replaced with ISO/IEC 9945-2:2003;
- reference document UDF 2.00 is replaced with UDF 2.01.
- Technical report17 pagesEnglish languagesale 15% off
ISO/IEC 22091:2002 specifies a lossless compression algorithm to reduce the number of 8-bit bytes required to represent data records and File Marks. The algorithm is known as Streaming Lossless Data Compression algorithm (SLDC). ISO/IEC 22091:2002 is based on ISO/IEC 15220. It extends that algorithm with the addition of control symbols that allow records of different sizes and compressibility, along with File Marks, to be efficiently encoded into an output stream which requires little or no additional control information for later decoding. The numerical identifier according to ISO/IEC 11576 allocated to this algorithm is 6.
- Standard8 pagesEnglish languagesale 15% off
Specifies an application program interface (API) for reading and writing the files which conform to the Universal Disk Format (UDF) specification revision 2.00 developed by the Optical Storage Technology Association (OSTA) and its security extension.
- Technical report15 pagesEnglish languagesale 15% off
This part of ISO/IEC 13346 specifies a format and associated system requirements for volume and boot block recognition by specifying: volume recognition; boot descriptors intended for use to bring a system to a known state; levels of medium interchange; requirements for the processes which are provided within information processing systems, to enable information to be interchanged between different systems; for this purpose, this part of ISO/IEC 13346 specifies the functions to be provided within systems which are intended to originate or receive media which conform to this part of ISO/IEC 13346.
- Standard9 pagesEnglish languagesale 15% off
ISO/IEC 13346 specifies a format and associated system requirements for volume and boot block recognition, volume structure, file structure and record structure for the interchange of information on media between users of information processing systems. The media shall be recorded as if the recording of sectors may be done in any order. Note 1 - The medium is not restricted to being of only one type; the type of medium may be either write once, or read only, or rewritable, or a combination of these types. ISO/IEC 13346 consists of the following five Parts: Part 1: General Part 2: Volume and Boot Block Recognition Part 3: Volume Structure Part 4: File Structure Part 5: Record Structure Annex A - ICB Strategies, is part of ISO/IEC 13346-4. This part of ISO/IEC 13346 specifies a format and associated system requirements for volume structure by specifying: the attributes of a volume and the descriptors recorded on it; the relationship among volumes of a volume set; the attributes of a partition of a volume; the attributes of a logical volume and the descriptors recorded on it; levels of medium interchange; requirements for the processes which are provided within information processing systems, to enable information to be interchanged between different systems; for this purpose, it specifies the functions to be provided within systems which are intended to originate or receive media which conform to this part of ISO/IEC 13346.
- Standard29 pagesEnglish languagesale 15% off
ISO/IEC 13346 specifies a format and associated system requirements for volume and boot block recognition, volume structure, file structure and record structure for the interchange of information on media between users of information processing systems. The media shall be recorded as if the recording of sectors may be done in any order. Note 1 - The medium is not restricted to being of only one type; the type of medium may be either write once, or read only, or rewritable, or a combination of these types. This International Standard consists of the following five Parts: Part 1: General Part 2: Volume and Boot Block Recognition Part 3: Volume Structure Part 4: File Structure Part 5: Record Structure Annex A - ICB Strategies, is part of this part of ISO/IEC 13346. This part of ISO/IEC 13346 specifies a format and associated system requirements for file structure by specifying: - the placement of files; - the attributes of the files; - the relationship among files of a logical volume; - levels of medium interchange; - requirements for the processes which are provided within information processing systems, to enable information to be interchanged between different systems; for this purpose, it specifies the functions to be provided within systems which are intended to originate or receive media which conform to this part of ISO/IEC 13346.
- Standard62 pagesEnglish languagesale 15% off
Specifies a format and associated system requirements for record structure for the interchange of information on media between users of information processing systems by specifying record structures, the attributes of the records of a file and requirements for the processes to enable information to be interchanged between different systems.
- Standard8 pagesEnglish languagesale 15% off
Consists of five parts; part 1 specifies references, definitions, notation and basic structures that apply to the other four parts.
- Standard12 pagesEnglish languagesale 15% off
Specifies an algorithm for the reduction of the number of bits required to represent information. This process is known as data compression. The algorithm uses binary arithmetic coding and provides lossless compression and is intended for use in information interchange.
- Standard18 pagesEnglish languagesale 15% off
Specifies a lossless compression algorithm (DCLZ - Data Compression according to Lempel and Ziv) to reduce the number of bits required to represent information coded by means of 8-bit bytes. This algorithm is particularly useful when information has to be recorded on an interchangeable medium. Its use is not limited to this application.
- Standard12 pagesEnglish languagesale 15% off
ISO/IEC 20919:2016 defines the LTFS Format requirements for interchanged media that claims LTFS compliance. Those requirements are specified as the size and sequence of data blocks and file marks on the media, the content and form of special data constructs (the LTFS Label and LTFS Index), and the content of the partition labels and use of MAM parameters. The data content (not the physical media) of the LTFS format shall be interchangeable among all data storage systems claiming conformance to this format. Physical media interchange is dependent on compatibility of physical media and the media access devices in use. ISO/IEC 20919:2016 does not contain instructions or tape command sequences to build the LTFS structure.
- Standard69 pagesEnglish languagesale 15% off
- Standard69 pagesEnglish languagesale 15% off
- Standard69 pagesEnglish languagesale 15% off
- Amendment3 pagesEnglish languagesale 10% offe-Library read for1 day
Specifies the performance requirements together with the test methods and conditions required to show compliance of tubular fluorescent and other gas-discharge lamps with integrated means for controlling starting and stable operation (self-ballasted lamps), intended for domestic and similar general
lighting purposes.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment3 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment4 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61156-8:2009(E) relates to IEC 61156-1 and IEC 61156-7. The cables described herein are specified up to 1 200 MHz and are specifically designed to build patch, equipment, and work area cables as defined in ISO/IEC 11801 and ISO/IEC 15018. It covers a cable having four individually screened (STP) pairs. The cable may be provided with a common screen over the cable core. The transmission characteristics are specified for a frequency range 4 MHz to 1 200 MHz and at 20 °C.
The contents of the corrigendum of July 2009 have been included in this copy.
- Standard8 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard54 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard43 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard5 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
Specifies the procedure to be followed by a registration authority in preparing, maintaining und publishing an international register of numeric identifiers allocated to the algorithms, excluding cryptographic ones. Describes in detail: registration authority; sponsoring authorities; registration, withdrawal, correction and revision procedure; early reservation of an identifier. An identifier registered in accordance with this standard serves as an identification of the algorithm associated with it in the register. Apart from such identification, registration does not affect the status of the algorithm concerned.
- Standard5 pagesEnglish languagesale 15% off
- Standard100 pagesEnglish languagesale 15% off
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Standard42 pagesEnglish languagesale 15% off
- Standard47 pagesFrench languagesale 15% off
- Standard23 pagesEnglish languagesale 15% off
- Standard23 pagesFrench languagesale 15% off
- Standard16 pagesFrench languagesale 15% off
- Standard2 pagesEnglish languagesale 15% off
- Standard2 pagesFrench languagesale 15% off