31.220.01 - Electromechanical components in general

IEC 60603-7:2020 is available as IEC 60603-7:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60603-7:2020 covers 8-way, unshielded, free and fixed connectors and is intended to specify the common dimensions (interface dimensions), mechanical, electrical and environmental characteristics and tests for the family of IEC 60603-7-x connectors. These connectors are intermateable (according to...view more

IEC 60512-9-5:2020 is available as IEC 60512-9-5:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60512-9-5:2020 when required by the detail product specification, is used for testing connectors or solderless connections within the scope of technical committee 48. It may also be used for similar devices when specified in a detail product specification. The object of this document is t...view more

This part of IEC 60512, when required by the detail (product) specification, is used for testing
connectors within the scope of IEC technical committee 48. This test may also be used for
similar devices (i.e. when the degradation mechanisms are the same) when specified in a detail
(product) specification.
The object of this test is to define a standard test method to assess the ability of connectors to
function in a specified manner, in a specified environment which might be encountered dur...view more

IEC 60512-11-1:2019 when required by the detail (product) specification, is used for testing connectors within the scope of IEC technical committee 48. This test may also be used for similar devices (i.e. when the degradation mechanisms are the same) when specified in a detail (product) specification. The object of this test is to define a standard test method to assess the ability of connectors to function in a specified manner, in a specified environment which might be encountered during norma...view more

IEC 60512-11-1:2019 when required by the detail (product) specification, is used for testing connectors within the scope of IEC technical committee 48. This test may also be used for similar devices (i.e. when the degradation mechanisms are the same) when specified in a detail (product) specification.
The object of this test is to define a standard test method to assess the ability of connectors to function in a specified manner, in a specified environment which might be encountered during norm...view more

This part of IEC 60512 defines a standard test method for measuring the shielding effectiveness SE of a shielded connector, or of a connector not provided with integral shield once fitted with a shielding accessory and terminated with a screened cable. The complete assembly has a continuous 360° shielding capability throughout its length. NOTE 1 Practically, continuous 360° shielding is not always achievable based on the geometry of the connector. NOTE 2 Shielding" is used in this document with ...view more

IEC 62783-2:2019 covers indoor cables and specifies the definitions and requirements of twin-axial cables used in digital communication systems. This document, which is a family specification, gives additional requirements for twinax cables for use in IEEE Std 802.3 Ethernet physical interfaces.
This document gives requirements and transmission characteristics for single twinax elements as well as for multiple twinax elements within the same sheath, i.e. "twinax cable". This International Stand...view more

IEC 60512-23-3:2018 is available as IEC 60512-23-3:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60512-23-3:2018. defines a standard test method for measuring the shielding effectiveness SE of a shielded connector, or of a connector not provided with integral shield once fitted with a shielding accessory and terminated with a screened cable. The complete assembly has a continuous 36...view more

This Technical Report provides information on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614.

This Technical Report provides information on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614.

IEC 61788-23:2018 addresses a test method for the determination of the residual resistance ratio (RRR) of cavity-grade niobium. The test method should be valid for specimens with rectangular or round cross-section, cross-sectional area greater than 1 mm2 but less than 20 mm2, and a length not less than 10 nor more than 25 times the width or diameter.

IEC 60512-8-3:2018 this part of IEC 60512, when required by the detail (product) specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices, when specified in a detail (product) specification. The object of this document is to detail a standard test method to assess the robustness of the actuating lever of a connector mating or release mechanism. This second edition cancels and replaces the first edition published in 2011...view more

IEC 60512-8-3:2018 this part of IEC 60512, when required by the detail (product) specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices, when specified in a detail (product) specification.
The object of this document is to detail a standard test method to assess the robustness of the actuating lever of a connector mating or release mechanism.
This second edition cancels and replaces the first edition published in 20...view more

This Technical Specification applies to the following operations: collection, handling, sorting, storage, preparation for transport and transport of WEEE. It is applicable to all WEEE prior to arriving at the treatment facility or arriving at a preparation for re-use facility.
This Technical Specification addresses all operators that perform collection and logistics operations.
This technical specification does not cover treatment of WEEE. In case of treatment activities undertaken at col...view more

This Technical Specification applies to the following operations: collection, handling, sorting, storage, preparation for transport and transport of WEEE. It is applicable to all WEEE prior to arriving at the treatment facility or arriving at a preparation for re-use facility. This Technical Specification addresses all operators that perform collection and logistics operations. This technical specification does not cover treatment of WEEE. In case of treatment activities undertaken at collection...view more

IEC 61240:2016 sets out general rules for drawing all dimensional and geometrical characteristics of a surface-mounted piezoelectric device package (referred to in this document as SMD) in order to ensure mechanical inter-changeability of all outline drawings of the SMDs for frequency control and selection. This edition includes the following significant technical changes with respect to the previous edition:
- outline drawings have been changed from three views (top, front and bottom) to that ...view more

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard EN 50625-1 for most types of WEEE (other documents will be developed to define requirements for specific WEEE requiring more specialised treatment).

This clause of Part 1 is replaced by the following: This European standard is applicable to the treatment of lamps. This European Standard applies to the treatment of lamps until end-of-waste status is ful-filled, or lamp fractions are recycled, recovered, or disposed of. This European Standard addresses all operators involved in the treatment including related handling, sorting, and storage of lamps. This European Standard applies to all facilities including those whose treatment operations use...view more

This European Standard is applicable to the treatment of waste electrical and electronic equipment (WEEE). This standard will be supplemented, for example by standards covering specific equipment. NOTE This European Standard is intended to cover WEEE arising from electrical and electronic equipment as listed in Annex I and Annex III of Directive 2012/19/EU. This standard applies to the treatment of WEEE until end-of-waste status is fulfilled, or until the WEEE is prepared for re-use, recycled, r...view more