iTeh Standards logo
EURUSD
Your shopping cart is empty.

11.040.25 - Syringes, needles an catheters

ICS 11.040.25 Details

Syringes, needles an catheters

Seringues, aiguilles et cathéters

Injekcijske brizge, igle in katetri

General Information

Parent
11.040 - Medical equipment

e-Library Subscription

Create subscription and get permanent access to documents within 11.040.25 - Syringes, needles an catheters

Type
Monthly Subscription
for
seat
×
$ 124.73
$ 124.73

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
ISO
ISO 11040-3:2025(Main)
Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges

This document specifies the shape, dimensions, material, performance requirements and labelling of seals for dental local anaesthetic cartridges intended for single use only. NOTE The potency, purity, stability and safety of a medicinal product during its manufacture and storage can be significantly affected by the nature and performance of the primary packaging.

  • Standard
    7 pages
    English language
    sale 15% off
SIST
SIST EN ISO 80369-6:2025(Main)
Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neural applications (ISO 80369-6:2025)
EN ISO 80369-6:2025

NOTE         Clause A.2 contains guidance or rationale for this clause.
This document specifies requirements for small-bore connectors intended to be used for connections in neural applications.
This document does not specify requirements for the medical devices or accessories that use these connectors. Such requirements are given in particular standards for specific medical devices or accessories.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23908:2025(Main)
Sharps injury protection - Sharps protection mechanisms for single-use needles, introducers for catheters and needles used for blood testing, monitoring, sampling and medical substance administration - Requirements and test methods (ISO 23908:2024)
EN ISO 23908:2025

This document provides requirements and test methods to evaluate the performance and usability of sharps injury protection mechanisms (SIPMs) of devices including a single use sharp, for administration and/or extraction of blood or body fluids and/or medicinal substances.
The sharps injury protection mechanisms covered by this document can be provided integral to the device or for assembly with the device prior to use.
The aim of the tests is to confirm minimization of risks of accidental sharps injury from contaminated sharps, after the period of intended use, including the path to safe disposal or recovery, where this is a legal requirement or the manufacturers’ decision.
This document does not cover
—     devices for medication loading and transfer, utilizing a blunt tip design, or
—     invasive products whose intended use is to access small spaces, particularly ear, nose and throat, to perform ophthalmic procedures
because their SIPMs have been found to adversely affect the usability and can increase the risk for patients versus the benefit of the intended use of the device.
This document does not cover solid-core needles used for surgery (e.g. suture needles).

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23908:2025(Main)
Sharps injury protection - Sharps protection mechanisms for single-use needles, introducers for catheters and needles used for blood testing, monitoring, sampling and medical substance administration - Requirements and test methods (ISO 23908:2024)
SIST EN ISO 23908:2025

This document provides requirements and test methods to evaluate the performance and usability of sharps injury protection mechanisms (SIPMs) of devices including a single use sharp, for administration and/or extraction of blood or body fluids and/or medicinal substances.
The sharps injury protection mechanisms covered by this document can be provided integral to the device or for assembly with the device prior to use.
The aim of the tests is to confirm minimization of risks of accidental sharps injury from contaminated sharps, after the period of intended use, including the path to safe disposal or recovery, where this is a legal requirement or the manufacturers’ decision.
This document does not cover
—     devices for medication loading and transfer, utilizing a blunt tip design, or
—     invasive products whose intended use is to access small spaces, particularly ear, nose and throat, to perform ophthalmic procedures
because their SIPMs have been found to adversely affect the usability and can increase the risk for patients versus the benefit of the intended use of the device.
This document does not cover solid-core needles used for surgery (e.g. suture needles).

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN ISO 80369-6:2025(Main)
Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neural applications (ISO 80369-6:2025)
SIST EN ISO 80369-6:2025

NOTE Clause A.2 contains guidance or rationale for this clause. This document specifies requirements for small-bore connectors intended to be used for connections in neural applications. This document does not specify requirements for the medical devices or accessories that use these connectors. Such requirements are given in particular standards for specific medical devices or accessories.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 80369-6:2025(Main)
Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neural applications (ISO 80369-6:2025)
SIST EN ISO 80369-6:2025

NOTE         Clause A.2 contains guidance or rationale for this clause.
This document specifies requirements for small-bore connectors intended to be used for connections in neural applications.
This document does not specify requirements for the medical devices or accessories that use these connectors. Such requirements are given in particular standards for specific medical devices or accessories.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 80369-6:2025(Main)
Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neural applications

NOTE Clause A.2 contains guidance or rationale for this clause. This document specifies requirements for small-bore connectors intended to be used for connections in neural applications. This document does not specify requirements for the medical devices or accessories that use these connectors. Such requirements are given in particular standards for specific medical devices or accessories.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    32 pages
    French language
    sale 15% off
IEC
ISO 80369-6:2025(Main)
Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neural applications

NOTE Clause A.2 contains guidance or rationale for this clause.
This document specifies requirements for small-bore connectors intended to be used for connections in neural applications.
This document does not specify requirements for the medical devices or accessories that use these connectors. Such requirements are given in particular standards for specific medical devices or accessories.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    32 pages
    French language
    sale 15% off
SIST
SIST EN IEC 60601-2-16:2025(Main)
Medical electrical equipment - Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment (IEC 60601-2-16:2025)
EN IEC 60601-2-16:2025

IEC 60601-2-16:2025 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HAEMODIALYSIS, HAEMODIAFILTRATION and HAEMOFILTRATION EQUIPMENT, hereafter referred to as HAEMODIALYSIS EQUIPMENT. It applies to HAEMODIALYSIS EQUIPMENT intended for use either by medical staff or under the supervision of medical experts, including HAEMODIALYSIS EQUIPMENT operated by the PATIENT, regardless of whether the HAEMODIALYSIS EQUIPMENT is used in a hospital or domestic environment. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. This document does not take into consideration specific safety details of the DIALYSIS FLUID control system of HAEMODIALYSIS EQUIPMENT using regeneration of DIALYSIS FLUID or CENTRAL DELIVERY SYSTEMS for DIALYSIS FLUID. It does, however, take into consideration the specific safety requirements of such HAEMODIALYSIS EQUIPMENT concerning electrical safety and PATIENT safety. This document specifies the minimum safety requirements for HAEMODIALYSIS EQUIPMENT. These HAEMODIALYSIS EQUIPMENT are intended for use either by medical staff or for use by the PATIENT or other trained personnel under medical supervision. This document includes all ME EQUIPMENT that is intended to deliver a HAEMODIALYSIS, HAEMODIAFILTRATION and HAEMOFILTRATION treatment to a PATIENT, independent of the treatment duration and location. If applicable, this document applies to the relevant parts of ME EQUIPMENT intended for other extracorporeal blood purification treatments.
The particular requirements in this document do not apply to:
– EXTRACORPOREAL CIRCUITS (see ISO 8637-2),
– DIALYSERS (see ISO 8637-1 [2]),
– DIALYSIS FLUID CONCENTRATES (see ISO 23500-4),
– pre-manufactured DIALYSIS FLUID bags,
– DIALYSIS WATER supply systems (see ISO 23500-2),
– CENTRAL DELIVERY SYSTEMS for DIALYSIS FLUID CONCENTRATES (see ISO 23500-4), described as systems for bulk mixing concentrate at a dialysis facility,
– equipment used to perform PERITONEAL DIALYSIS (see IEC 60601-2-39).
IEC 60601-2-16:2024 cancels and replaces the fifth edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) update of references to IEC 60601‑1:2005, IEC 60601‑1:2005/AMD1:2012 and IEC 60601‑1:2005/AMD2:2020, of references to IEC 60601‑1‑2:2014 and IEC 60601‑1‑2:2014/AMD1:2020, of references to IEC 60601‑1‑8:2006, IEC 60601‑1‑8:2006/AMD1:2012 and IEC 60601‑1‑8:2006/AMD2:2020, of references to IEC 60601‑1‑9:2007, IEC 60601‑1‑9:2007/AMD1:2013 and IEC 60601‑1‑9:2007/AMD2:2020, of references to IEC 60601‑1‑10:2007, IEC 60601‑1‑10:2007/AMD1:2013 and IEC 60601‑1‑10:2007/AMD2:2020 and of references to IEC 60601‑1‑11:2015 and IEC 60601‑1‑11:2015/AMD1:2020;
b) consideration of ESSENTIAL PERFORMANCE in SINGLE FAULT CONDITION regarding IEC 60601‑1:2005/AMD1:2012/ISH1:2021;
c) including the information given in the document 62D/1771A/INF regarding 201.11.8;
d) including withdrawn IEC PAS 63023 as Annex CC;
e) including SECURITY (CYBERSECURITY) requirements;
f) consideration of HAEMODIALYSIS EQUIPMENT using pre-manufactured DIALYSIS FLUID bags;
g) improvements for labelling;
h) other minor technical improvements;
i) editorial improvements.

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60601-2-16:2025(Main)
Medical electrical equipment - Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
SIST EN IEC 60601-2-16:2025

IEC 60601-2-16:2025 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HAEMODIALYSIS, HAEMODIAFILTRATION and HAEMOFILTRATION EQUIPMENT, hereafter referred to as HAEMODIALYSIS EQUIPMENT. It applies to HAEMODIALYSIS EQUIPMENT intended for use either by medical staff or under the supervision of medical experts, including HAEMODIALYSIS EQUIPMENT operated by the PATIENT, regardless of whether the HAEMODIALYSIS EQUIPMENT is used in a hospital or domestic environment. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. This document does not take into consideration specific safety details of the DIALYSIS FLUID control system of HAEMODIALYSIS EQUIPMENT using regeneration of DIALYSIS FLUID or CENTRAL DELIVERY SYSTEMS for DIALYSIS FLUID. It does, however, take into consideration the specific safety requirements of such HAEMODIALYSIS EQUIPMENT concerning electrical safety and PATIENT safety. This document specifies the minimum safety requirements for HAEMODIALYSIS EQUIPMENT. These HAEMODIALYSIS EQUIPMENT are intended for use either by medical staff or for use by the PATIENT or other trained personnel under medical supervision. This document includes all ME EQUIPMENT that is intended to deliver a HAEMODIALYSIS, HAEMODIAFILTRATION and HAEMOFILTRATION treatment to a PATIENT, independent of the treatment duration and location. If applicable, this document applies to the relevant parts of ME EQUIPMENT intended for other extracorporeal blood purification treatments. The particular requirements in this document do not apply to: – EXTRACORPOREAL CIRCUITS (see ISO 8637-2), – DIALYSERS (see ISO 8637-1 [2]), – DIALYSIS FLUID CONCENTRATES (see ISO 23500-4), – pre-manufactured DIALYSIS FLUID bags, – DIALYSIS WATER supply systems (see ISO 23500-2), – CENTRAL DELIVERY SYSTEMS for DIALYSIS FLUID CONCENTRATES (see ISO 23500-4), described as systems for bulk mixing concentrate at a dialysis facility, – equipment used to perform PERITONEAL DIALYSIS (see IEC 60601-2-39). IEC 60601-2-16:2024 cancels and replaces the fifth edition published in 2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) update of references to IEC 60601‑1:2005, IEC 60601‑1:2005/AMD1:2012 and IEC 60601‑1:2005/AMD2:2020, of references to IEC 60601‑1‑2:2014 and IEC 60601‑1‑2:2014/AMD1:2020, of references to IEC 60601‑1‑8:2006, IEC 60601‑1‑8:2006/AMD1:2012 and IEC 60601‑1‑8:2006/AMD2:2020, of references to IEC 60601‑1‑9:2007, IEC 60601‑1‑9:2007/AMD1:2013 and IEC 60601‑1‑9:2007/AMD2:2020, of references to IEC 60601‑1‑10:2007, IEC 60601‑1‑10:2007/AMD1:2013 and IEC 60601‑1‑10:2007/AMD2:2020 and of references to IEC 60601‑1‑11:2015 and IEC 60601‑1‑11:2015/AMD1:2020; b) consideration of ESSENTIAL PERFORMANCE in SINGLE FAULT CONDITION regarding IEC 60601‑1:2005/AMD1:2012/ISH1:2021; c) including the information given in the document 62D/1771A/INF regarding 201.11.8; d) including withdrawn IEC PAS 63023 as Annex CC; e) including SECURITY (CYBERSECURITY) requirements; f) consideration of HAEMODIALYSIS EQUIPMENT using pre-manufactured DIALYSIS FLUID bags; g) improvements for labelling; h) other minor technical improvements; i) editorial improvements.

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
IEC
IEC 60601-2-16:2025(Main)
Medical electrical equipment - Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment

IEC 60601-2-16:2025 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HAEMODIALYSIS, HAEMODIAFILTRATION and HAEMOFILTRATION EQUIPMENT, hereafter referred to as HAEMODIALYSIS EQUIPMENT. It applies to HAEMODIALYSIS EQUIPMENT intended for use either by medical staff or under the supervision of medical experts, including HAEMODIALYSIS EQUIPMENT operated by the PATIENT, regardless of whether the HAEMODIALYSIS EQUIPMENT is used in a hospital or domestic environment. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. This document does not take into consideration specific safety details of the DIALYSIS FLUID control system of HAEMODIALYSIS EQUIPMENT using regeneration of DIALYSIS FLUID or CENTRAL DELIVERY SYSTEMS for DIALYSIS FLUID. It does, however, take into consideration the specific safety requirements of such HAEMODIALYSIS EQUIPMENT concerning electrical safety and PATIENT safety. This document specifies the minimum safety requirements for HAEMODIALYSIS EQUIPMENT. These HAEMODIALYSIS EQUIPMENT are intended for use either by medical staff or for use by the PATIENT or other trained personnel under medical supervision. This document includes all ME EQUIPMENT that is intended to deliver a HAEMODIALYSIS, HAEMODIAFILTRATION and HAEMOFILTRATION treatment to a PATIENT, independent of the treatment duration and location. If applicable, this document applies to the relevant parts of ME EQUIPMENT intended for other extracorporeal blood purification treatments.
The particular requirements in this document do not apply to:
– EXTRACORPOREAL CIRCUITS (see ISO 8637-2),
– DIALYSERS (see ISO 8637-1 [2]),
– DIALYSIS FLUID CONCENTRATES (see ISO 23500-4),
– pre-manufactured DIALYSIS FLUID bags,
– DIALYSIS WATER supply systems (see ISO 23500-2),
– CENTRAL DELIVERY SYSTEMS for DIALYSIS FLUID CONCENTRATES (see ISO 23500-4), described as systems for bulk mixing concentrate at a dialysis facility,
– equipment used to perform PERITONEAL DIALYSIS (see IEC 60601-2-39).
IEC 60601-2-16:2024 cancels and replaces the fifth edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) update of references to IEC 60601‑1:2005, IEC 60601‑1:2005/AMD1:2012 and IEC 60601‑1:2005/AMD2:2020, of references to IEC 60601‑1‑2:2014 and IEC 60601‑1‑2:2014/AMD1:2020, of references to IEC 60601‑1‑8:2006, IEC 60601‑1‑8:2006/AMD1:2012 and IEC 60601‑1‑8:2006/AMD2:2020, of references to IEC 60601‑1‑9:2007, IEC 60601‑1‑9:2007/AMD1:2013 and IEC 60601‑1‑9:2007/AMD2:2020, of references to IEC 60601‑1‑10:2007, IEC 60601‑1‑10:2007/AMD1:2013 and IEC 60601‑1‑10:2007/AMD2:2020 and of references to IEC 60601‑1‑11:2015 and IEC 60601‑1‑11:2015/AMD1:2020;
b) consideration of ESSENTIAL PERFORMANCE in SINGLE FAULT CONDITION regarding IEC 60601‑1:2005/AMD1:2012/ISH1:2021;
c) including the information given in the document 62D/1771A/INF regarding 201.11.8;
d) including withdrawn IEC PAS 63023 as Annex CC;
e) including SECURITY (CYBERSECURITY) requirements;
f) consideration of HAEMODIALYSIS EQUIPMENT using pre-manufactured DIALYSIS FLUID bags;
g) improvements for labelling;
h) other minor technical improvements;
i) editorial improvements.

  • Standard
    311 pages
    English language
    sale 15% off
SIST
SIST EN ISO 80369-20:2025(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2024)
EN ISO 80369-20:2024

NOTE            Clause A.2 contains guidance or rationale for this clause.
This document specifies the common test methods to evaluate the performance requirements for small-bore connectors specified in the ISO and IEC 80369 series as well as the ISO 18250 series.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 23908:2024(Main)
Sharps injury protection — Sharps protection mechanisms for single-use needles, introducers for catheters and needles used for blood testing, monitoring, sampling and medical substance administration — Requirements and test methods

This document provides requirements and test methods to evaluate the performance and usability of sharps injury protection mechanisms (SIPMs) of devices including a single use sharp, for administration and/or extraction of blood or body fluids and/or medicinal substances. The sharps injury protection mechanisms covered by this document can be provided integral to the device or for assembly with the device prior to use. The aim of the tests is to confirm minimization of risks of accidental sharps injury from contaminated sharps, after the period of intended use, including the path to safe disposal or recovery, where this is a legal requirement or the manufacturers’ decision. This document does not cover — devices for medication loading and transfer, utilizing a blunt tip design, or — invasive products whose intended use is to access small spaces, particularly ear, nose and throat, to perform ophthalmic procedures because their SIPMs have been found to adversely affect the usability and can increase the risk for patients versus the benefit of the intended use of the device. This document does not cover solid-core needles used for surgery (e.g. suture needles).

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
CEN
EN ISO 80369-20:2024(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369‑20:2024)
SIST EN ISO 80369-20:2025

NOTE            Clause A.2 contains guidance or rationale for this clause.
This document specifies the common test methods to evaluate the performance requirements for small-bore connectors specified in the ISO and IEC 80369 series as well as the ISO 18250 series.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 80369-20:2024(Main)
Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods

NOTE Clause A.2 contains guidance or rationale for this clause. This document specifies the common test methods to evaluate the performance requirements for small-bore connectors specified in the ISO and IEC 80369 series as well as the ISO 18250 series.

  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    32 pages
    French language
    sale 15% off
IEC
ISO 80369-20:2024(Main)
Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods

NOTE Clause A.2 contains guidance or rationale for this clause.
This document specifies the common test methods to evaluate the performance requirements for small-bore connectors specified in the ISO and IEC 80369 series as well as the ISO 18250 series.

  • Standard
    32 pages
    English language
    sale 15% off
  • Standard
    32 pages
    French language
    sale 15% off
ISO
ISO 10555-8:2024(Main)
Intravascular catheters — Sterile and single-use catheters — Part 8: Catheters for extracorporeal blood treatment

This document specifies general requirements for intravascular catheters, supplied in sterile condition and intended for extracorporeal blood treatments (EBT).

  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    13 pages
    French language
    sale 15% off
ISO
ISO 6559:2024(Main)
Traditional Chinese medicine — Sterile three-edge needle for single use

This document specifies the configuration, dimensions, parameters, requirements and test methods of a sterile three-edge needle for single use. It also specifies requirements for packaging, labelling, transit and storage. This document excludes requirements for the handle of a three-edge needle, which is structurally different from the body of a three-edge needle.

  • Standard
    9 pages
    English language
    sale 15% off
ISO
ISO 11040-7:2024(Main)
Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling

This document specifies a packaging system that is used to deliver sterilized subassembled syringes ready for filling in tubs and nests. Downstream processes (processes after filling such as in house/outside transport, reprocessing) can result in specific requirements on the packaging system used to deliver sterilized subassembled syringes ready for filling. However, these requirements are not within the scope of this document. NOTE 1 Glass barrels and sterilized subassembled syringes ready for filling, plunger stoppers, and plastic barrels for injectables are specified in ISO 11040-4, ISO 11040-5 and ISO 11040-6. NOTE 2 ISO 11607-2 addresses validation requirements of sealing and packaging processes for medical devices.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
ISO
ISO 11040-4:2024(Main)
Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling

This document specifies materials, dimensions, quality, and performance requirements, as well as relevant test methods. This document also specifies components that are part of the sterilized subassembled syringe ready for filling. This document is applicable to — tubing-glass barrels (single-chamber design) for injection preparations, and — sterilized subassembled syringes ready for filling. Glass barrels and sterilized subassembled syringes ready for filling in accordance with this document are intended for single use only. Components to complete the subassembled syringe, such as plunger stopper and plunger rod, are outside the scope of this document. NOTE National or regional regulations such as Ph.Eur., USP, or JP can apply.

  • Standard
    53 pages
    English language
    sale 15% off
  • Standard
    57 pages
    French language
    sale 15% off
ISO
ISO 23217:2024(Main)
Injection systems for self-administration by paediatric patients — Requirements and guidelines for design

This document provides requirements and guidelines on the development of drug delivery systems intended for self-administration of medicinal products by the specific demographic group of paediatric patients who are performing some or all use steps required for their intended use. Use steps include any handling action performed after the patient has received the product; these can include but are not limited to: — transport – carrying the product while travelling (e.g. by walking, train, airplane, automobile, bus); — storage – storage by the patient in their home, school, office or in temporary storage cases before or between uses; — preparation – steps necessary to place the product in a state where it is ready to be administered; — operation – steps necessary to initiate, adjust, pause, stop, or otherwise manage the delivery of medication using the product; — maintenance – steps necessary to keep the product in good working order; — disposal – steps to ensure safe disposal of the product after use (e.g. placement of the product in a suitable receptacle). This document is applicable to injectable drug delivery systems for administration of medicinal products. Furthermore, this document can be useful for the development of other drug delivery devices or systems if they are intended for use by the paediatric population. Devices not in the scope of this document include catheters, for example those in the scope of ISO 10555 series, and infusion pump systems, e.g. IEC 60601-2-24 and aerosol delivery devices (ISO 20072).

  • Standard
    39 pages
    English language
    sale 15% off
SIST
SIST EN ISO 10555-4:2024(Main)
Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:2023)
EN ISO 10555-4:2023

This document specifies requirements for balloon dilatation catheters supplied sterile and intended for single use.
This document does not specify requirements for vascular stents (see ISO 25539-2).
NOTE            Guidance on the selection of balloon materials is given in Annex G.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10555-1:2024(Main)
Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements (ISO 10555-1:2023)
EN ISO 10555-1:2023

This document specifies general requirements for intravascular catheters, supplied sterile and intended for single use, for any application.
This document does not apply to intravascular catheter accessories, e.g. those covered by ISO 11070.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 10555-7:2023(Main)
Intravascular catheters — Sterile and single-use catheters — Part 7: Peripherally inserted central catheters

This document specifies general requirements and test method for peripherally inserted central catheters (PICC), supplied in the sterile condition and intended for single use, for any application. It is not applicable to intravascular catheter accessories, e.g. those covered by ISO 11070.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
CEN
EN ISO 10555-1:2023(Main)
Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements (ISO 10555-1:2023)
SIST EN ISO 10555-1:2024

This document specifies general requirements for intravascular catheters, supplied sterile and intended for single use, for any application.
This document does not apply to intravascular catheter accessories, e.g. those covered by ISO 11070.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10555-4:2023(Main)
Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:2023)
SIST EN ISO 10555-4:2024

This document specifies requirements for balloon dilatation catheters supplied sterile and intended for single use.
This document does not specify requirements for vascular stents (see ISO 25539-2).
NOTE            Guidance on the selection of balloon materials is given in Annex G.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 10555-4:2023(Main)
Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters

This document specifies requirements for balloon dilatation catheters supplied sterile and intended for single use. This document does not specify requirements for vascular stents (see ISO 25539-2). NOTE Guidance on the selection of balloon materials is given in Annex G.

  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off
ISO
ISO 10555-1:2023(Main)
Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements

This document specifies general requirements for intravascular catheters, supplied sterile and intended for single use, for any application. This document does not apply to intravascular catheter accessories, e.g. those covered by ISO 11070.

  • Standard
    43 pages
    English language
    sale 15% off
  • Standard
    44 pages
    French language
    sale 15% off
SIST
SIST EN ISO 11608-5:2023(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2022)
EN ISO 11608-5:2023

This part of ISO 11608 specifies requirements and test methods for needle-based injection systems with automated functions (referred to in the standard as NIS-AUTO), for the administration of medicinal products in humans. This document does not cover remote communication from the NIS-AUTO.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11608-5:2023(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2022)
SIST EN ISO 11608-5:2023

This part of ISO 11608 specifies requirements and test methods for needle-based injection systems with automated functions (referred to in the standard as NIS-AUTO), for the administration of medicinal products in humans. This document does not cover remote communication from the NIS-AUTO.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80369-3:2016/A1:2023(Amendment)
Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 1 (ISO 80369-3:2016/Amd 1:2019)
EN ISO 80369-3:2016/A1:2022
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 80369-3:2016/A1:2022(Amendment)
Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 1 (ISO 80369-3:2016/Amd 1:2019)
SIST EN ISO 80369-3:2016/A1:2023
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11608-2:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles (ISO 11608-2:2022)
SIST EN ISO 11608-2:2022

This document specifies requirements and test methods for single-use, double-ended, sterile needles intended to be used with some needle-based injection systems (NISs) that use a non-integrated double-ended needle according to ISO 11608-1.
This document is not applicable to the following:
—    needles for dental use;
—    pre-attached syringe needles;
—    hypodermic needles;
—    needles intended for different routes of administration (e.g. intravenous, intrathecal, intraocular);
—    materials that form the medicinal product contact surfaces of the primary container closure.
However, while this document is not intended to directly apply to these needle products, it does contain requirements and tests methods that can be used to help design and evaluate them.
NOTE       Needles provided by the manufacturer integrated into the fluid path or container are covered in ISO 11608‑3, and hypodermic needles provided separately are covered in ISO 7864.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11608-4:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022, Corrected version 2024-12)
SIST EN ISO 11608-4:2022

This document specifies requirements and test methods for needle-based injection systems (NISs) containing electronics with or without software (NIS-Es).
The needle-based injection system containing electronics can be single use or reusable and can be operated with or without electrical/conductive connections to other devices. The system is intended to deliver medication to a patient by self-administration or by administration by one other operator (e.g. caregiver or health care provider).
This document applies to electronic accessories that are intended to be physically connected to a NIS or NIS-E according to the NIS/NIS-E intended use.
This document also applies to electronic accessories that are intended to have electrical/conductive connections to a NIS or NIS-E according to the NIS/NIS-E intended use.
This document does not specify requirements for software in programmable NIS-E.
NOTE       IEC 60601-1:2005+AMD1:2012+AMD2:2020, Clause 14 addresses software life cycle processes.
This document does not specify requirements for cybersecurity.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11608-3:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths (ISO 11608-3:2022, Corrected version 2023-01)
SIST EN ISO 11608-3:2022

This document specifies requirements and test methods for design verification of containers and integrated fluid paths used with Needle-Based Injection Systems (NISs) according to ISO 11608-1.
It is applicable to single and multi-dose containers either filled by the manufacturer (primary container closure) or by the end-user (reservoir) (e.g. cartridges, syringes) and fluid paths that are integrated with the NIS at the point of manufacture.
This document is also applicable to prefilled syringes (see ISO 11040-8) when used with a NIS (see also scope of ISO 11608-1:2022).
This document is not applicable to the following products:
—    sterile hypodermic needles;
—    sterile hypodermic syringes;
—    sterile single-use syringes, with or without needle, for insulin;
—    containers that can be refilled multiple times;
—    containers intended for dental use;
—    catheters or infusion sets that are attached or assembled separately by the user.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 26825:2022(Main)
Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs used during anaesthesia - Colours, design and performance (ISO 26825:2020)
SIST EN ISO 26825:2022

This document gives requirements for labels attached to syringes so that the contents can be identified just before use during anaesthesia. It covers the colour, size, design and general properties of the label and the typographical characteristics of the wording for the drug name.
NOTE    National or regional regulations might require additional labelling, which can include bar coding. No requirements for this additional labelling are given.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11608-3:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths (ISO 11608-3:2022)
EN ISO 11608-3:2022

This document specifies requirements and test methods for design verification of containers and integrated fluid paths used with Needle-Based Injection Systems (NISs) according to ISO 11608-1.
It is applicable to single and multi-dose containers either filled by the manufacturer (primary container closure) or by the end-user (reservoir) (e.g. cartridges, syringes) and fluid paths that are integrated with the NIS at the point of manufacture.
This document is also applicable to prefilled syringes (see ISO 11040-8) when used with a NIS (see also scope of ISO 11608-1:2022).
This document is not applicable to the following products:
—    sterile hypodermic needles;
—    sterile hypodermic syringes;
—    sterile single-use syringes, with or without needle, for insulin;
—    containers that can be refilled multiple times;
—    containers intended for dental use;
—    catheters or infusion sets that are attached or assembled separately by the user.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11608-1:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2022)
EN ISO 11608-1:2022

This document specifies requirements and test methods for Needle-Based Injection Systems (NISs) for single-patient use intended to deliver discrete volumes (bolus) of medicinal product, which can be delivered through needles or soft cannulas for intradermal, subcutaneous and/or intramuscular delivery, incorporating pre-filled or user-filled, replaceable or non-replaceable containers.
This document applies in cases where the NIS incorporates a prefilled syringe. However, stand-alone prefilled syringes defined by ISO 11040-8 are not covered by this document (see exclusions below).
It is important to note that other functions and characteristics of the prefilled syringe, such as dose accuracy, are subject to the requirements (delivered volume) in ISO 11040-8 and not this document, unless the addition impacts the delivery function (e.g. a mechanism that intends to restrict or stop the plunger movement, which would limit the dose delivered). In that case, the system is completely covered by this document and applicable requirements of the ISO 11608 series.
Excluded from the scope are:
—    stand-alone prefilled syringes defined by ISO 11040-8 (with noted exceptions above);
—    NISs that provide continuous delivery and require a delivery rate clinically specified in the medicinal product labelling or determined by a physician based on clinical relevance (i.e. medication efficacy) as would be the case with insulin patch pumps or traditional infusion pumps (e.g. IEC 60601-2-24, ISO 28620) associated with continuous delivery of medicinal products (e.g. insulin);
—    NISs with containers that can be refilled multiple times;
—    requirements relating to methods or equipment associated with user filling of containers unless they are dedicated accessories (a component necessary for primary function, whether included in the original kitted product or not);
—    NISs intended for dental use;
—    NISs intended for different routes of administration (e.g. intravenous, intrathecal, intraocular).
NOTE       These products that are excluded might benefit from elements in this document but might not completely fulfil the basic safety and effectiveness of such products.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11608-2:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 2: Double-ended pen needles (ISO 11608-2:2022)
EN ISO 11608-2:2022

This document specifies requirements and test methods for single-use, double-ended, sterile needles intended to be used with some needle-based injection systems (NISs) that use a non-integrated double-ended needle according to ISO 11608-1.
This document is not applicable to the following:
—    needles for dental use;
—    pre-attached syringe needles;
—    hypodermic needles;
—    needles intended for different routes of administration (e.g. intravenous, intrathecal, intraocular);
—    materials that form the medicinal product contact surfaces of the primary container closure.
However, while this document is not intended to directly apply to these needle products, it does contain requirements and tests methods that can be used to help design and evaluate them.
NOTE       Needles provided by the manufacturer integrated into the fluid path or container are covered in ISO 11608‑3, and hypodermic needles provided separately are covered in ISO 7864.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11608-4:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 4: Needle-based injection systems containing electronics (ISO 11608-4:2022)
EN ISO 11608-4:2022

This document specifies requirements and test methods for needle-based injection systems (NISs) containing electronics with or without software (NIS-Es).
The needle-based injection system containing electronics can be single use or reusable and can be operated with or without electrical/conductive connections to other devices. The system is intended to deliver medication to a patient by self-administration or by administration by one other operator (e.g. caregiver or health care provider).
This document applies to electronic accessories that are intended to be physically connected to a NIS or NIS-E according to the NIS/NIS-E intended use.
This document also applies to electronic accessories that are intended to have electrical/conductive connections to a NIS or NIS-E according to the NIS/NIS-E intended use.
This document does not specify requirements for software in programmable NIS-E.
NOTE       IEC 60601-1:2005+AMD1:2012+AMD2:2020, Clause 14 addresses software life cycle processes.
This document does not specify requirements for cybersecurity.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 23958-2:2022(Main)
Traditional Chinese medicine — Dermal needles for single use — Part 2: Roller-type

This document specifies the particular requirements for the basic safety and essential performance of roller-type dermal needles for single use. It applies to roller-type dermal needles that have the capacity to penetrate the skin. It specifies structure and dimension, materials, and performance requirements for appearance and cleanliness, corrosion resistance, sterility, packaging and identification, transit and storage of roller-type dermal needles. It does not apply to tapping-type dermal needles or reusable roller-type dermal needles.

  • Standard
    9 pages
    English language
    sale 15% off
CLC
EN IEC 60601-2-16:2019(Main)
Medical electrical equipment - Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
SIST EN IEC 60601-2-16:2019

NEW!IEC 60601-2-16:2018 is available as IEC 60601-2-16:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60601-2-16:2018 applies to the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment. IEC 60601-2-16:2018 does not take into consideration the dialysis fluid control system of Haemodialysis equipment using regeneration of dialysis fluid and central delivery systems. It does however take into consideration the specific safety requirements of such haemodialysis equipment concerning electrical safety and patient safety. IEC 60601-2-16:2018 specifies the minimum safety requirements for haemodialysis equipment. These devices are intended for use either by medical staff or for use by the patient or other trained personnel under the supervision of medical expertise. IEC 60601-2-16:2018 includes all electromedical equipment that is intended to deliver a haemodialysis, haemodiafiltration and haemofiltration treatment to a patient suffering from kidney failure. This fifth edition cancels and replaces the fourth edition of IEC 60601-2-16, published in 2012. This edition includes the following significant technical changes with respect to the previous edition: a) update of references to IEC 60601-1:2005 and IEC 60601-1:2005/AMD1:2012, of references and requirements to IEC 60601-1-2:2014, of references to IEC 60601-1-6:2010 and IEC 60601-1-6:2010/AMD1:2013, of references and requirements to IEC 60601-1-8:2006 and IEC 60601-1-8:2006/AMD1:2012, of references to IEC 60601-1-9:2007 and IEC 60601-1-9:2007/AMD1:2013, of references to IEC 60601-1-10:2007 and IEC 60601-1-10:2007/AMD1:2013 and of references to IEC 60601-1-11:2015; b) widening of the scope; c) editorial improvements; d) addition of requirements for anticoagulant delivery means; e) other few small technical changes.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 23958-1:2022(Main)
Traditional Chinese medicine — Dermal needles for single use — Part 1: Tapping-type

This document specifies the particular requirements for the basic safety and essential performance of tapping-type dermal needles for single use. It applies to tapping-type dermal needles that have the capacity to penetrate the skin. It specifies structure and dimension, materials, and performance requirements for appearance and cleanliness, corrosion resistance, sterility, packaging and identification, transit and storage of tapping-type dermal needles. It does not apply to roller-type dermal needles, reusable tapping-type dermal needles or devices incorporating a detachable tapping head.

  • Standard
    10 pages
    English language
    sale 15% off
CEN
EN ISO 11608-1:2022(Main)
Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2022)
SIST EN ISO 11608-1:2022

This document specifies requirements and test methods for Needle-Based Injection Systems (NISs) for single-patient use intended to deliver discrete volumes (bolus) of medicinal product, which can be delivered through needles or soft cannulas for intradermal, subcutaneous and/or intramuscular delivery, incorporating pre-filled or user-filled, replaceable or non-replaceable containers.
This document applies in cases where the NIS incorporates a prefilled syringe. However, stand-alone prefilled syringes defined by ISO 11040-8 are not covered by this document (see exclusions below).
It is important to note that other functions and characteristics of the prefilled syringe, such as dose accuracy, are subject to the requirements (delivered volume) in ISO 11040-8 and not this document, unless the addition impacts the delivery function (e.g. a mechanism that intends to restrict or stop the plunger movement, which would limit the dose delivered). In that case, the system is completely covered by this document and applicable requirements of the ISO 11608 series.
Excluded from the scope are:
—    stand-alone prefilled syringes defined by ISO 11040-8 (with noted exceptions above);
—    NISs that provide continuous delivery and require a delivery rate clinically specified in the medicinal product labelling or determined by a physician based on clinical relevance (i.e. medication efficacy) as would be the case with insulin patch pumps or traditional infusion pumps (e.g. IEC 60601-2-24, ISO 28620) associated with continuous delivery of medicinal products (e.g. insulin);
—    NISs with containers that can be refilled multiple times;
—    requirements relating to methods or equipment associated with user filling of containers unless they are dedicated accessories (a component necessary for primary function, whether included in the original kitted product or not);
—    NISs intended for dental use;
—    NISs intended for different routes of administration (e.g. intravenous, intrathecal, intraocular).
NOTE       These products that are excluded might benefit from elements in this document but might not completely fulfil the basic safety and effectiveness of such products.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
ISO
ISO 11608-5:2022(Main)
Needle-based injection systems for medical use — Requirements and test methods — Part 5: Automated functions

This document specifies requirements and test methods for automated functions in needle-based injection systems with automated functions (NIS-AUTO). General requirements are provided for all automated functions. In addition, specific requirements are provided for the following automated functions: a) medicinal product preparation (e.g. reconstitution); b) needle preparation; c) needle hiding; d) priming; e) dose setting; f) needle insertion; g) injection depth control; h) injection of the medicinal product; i) recording of device functions; NOTE This document does not cover remote communication from the NIS-AUTO (pertains to wired and wireless communication transfer from the NIS auto). j) disabling the NIS-AUTO; k) needle retraction; l) needle shielding; m) needle removal. All references to "function" in this document are by definition construed as automated functions (see 3.2). This document does not apply to functions that are performed manually by the user.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
ISO
ISO 11608-3:2022(Main)
Needle-based injection systems for medical use — Requirements and test methods — Part 3: Containers and integrated fluid paths

This document specifies requirements and test methods for design verification of containers and integrated fluid paths used with Needle-Based Injection Systems (NISs) according to ISO 11608-1. It is applicable to single and multi-dose containers either filled by the manufacturer (primary container closure) or by the end-user (reservoir) (e.g. cartridges, syringes) and fluid paths that are integrated with the NIS at the point of manufacture. This document is also applicable to prefilled syringes (see ISO 11040-8) when used with a NIS (see also scope of ISO 11608-1:2022). This document is not applicable to the following products: — sterile hypodermic needles; — sterile hypodermic syringes; — sterile single-use syringes, with or without needle, for insulin; — containers that can be refilled multiple times; — containers intended for dental use; — catheters or infusion sets that are attached or assembled separately by the user.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off
ISO
ISO 11608-2:2022(Main)
Needle-based injection systems for medical use — Requirements and test methods — Part 2: Double-ended pen needles

This document specifies requirements and test methods for single-use, double-ended, sterile needles intended to be used with some needle-based injection systems (NISs) that use a non-integrated double-ended needle according to ISO 11608-1. This document is not applicable to the following: — needles for dental use; — pre-attached syringe needles; — hypodermic needles; — needles intended for different routes of administration (e.g. intravenous, intrathecal, intraocular); — materials that form the medicinal product contact surfaces of the primary container closure. However, while this document is not intended to directly apply to these needle products, it does contain requirements and tests methods that can be used to help design and evaluate them. NOTE Needles provided by the manufacturer integrated into the fluid path or container are covered in ISO 11608‑3, and hypodermic needles provided separately are covered in ISO 7864.

  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
ISO
ISO 11608-4:2022(Main)
Needle-based injection systems for medical use — Requirements and test methods — Part 4: Needle-based injection systems containing electronics

This document specifies requirements and test methods for needle-based injection systems (NISs) containing electronics with or without software (NIS-Es). The needle-based injection system containing electronics can be single use or reusable and can be operated with or without electrical/conductive connections to other devices. The system is intended to deliver medication to a patient by self-administration or by administration by one other operator (e.g. caregiver or health care provider). This document applies to electronic accessories that are intended to be physically connected to a NIS or NIS-E according to the NIS/NIS-E intended use. This document also applies to electronic accessories that are intended to have electrical/conductive connections to a NIS or NIS-E according to the NIS/NIS-E intended use. This document does not specify requirements for software in programmable NIS-E. NOTE IEC 60601-1:2005+AMD1:2012+AMD2:2020, Clause 14 addresses software life cycle processes. This document does not specify requirements for cybersecurity.

  • Standard
    63 pages
    English language
    sale 15% off
  • Standard
    63 pages
    English language
    sale 15% off
  • Standard
    66 pages
    French language
    sale 15% off
  • Standard
    66 pages
    French language
    sale 15% off
ISO
ISO 11608-1:2022(Main)
Needle-based injection systems for medical use — Requirements and test methods — Part 1: Needle-based injection systems

This document specifies requirements and test methods for Needle-Based Injection Systems (NISs) for single-patient use intended to deliver discrete volumes (bolus) of medicinal product, which can be delivered through needles or soft cannulas for intradermal, subcutaneous and/or intramuscular delivery, incorporating pre-filled or user-filled, replaceable or non-replaceable containers. This document applies in cases where the NIS incorporates a prefilled syringe. However, stand-alone prefilled syringes defined by ISO 11040-8 are not covered by this document (see exclusions below). It is important to note that other functions and characteristics of the prefilled syringe, such as dose accuracy, are subject to the requirements (delivered volume) in ISO 11040-8 and not this document, unless the addition impacts the delivery function (e.g. a mechanism that intends to restrict or stop the plunger movement, which would limit the dose delivered). In that case, the system is completely covered by this document and applicable requirements of the ISO 11608 series. Excluded from the scope are: — stand-alone prefilled syringes defined by ISO 11040-8 (with noted exceptions above); — NISs that provide continuous delivery and require a delivery rate clinically specified in the medicinal product labelling or determined by a physician based on clinical relevance (i.e. medication efficacy) as would be the case with insulin patch pumps or traditional infusion pumps (e.g. IEC 60601-2-24, ISO 28620) associated with continuous delivery of medicinal products (e.g. insulin); — NISs with containers that can be refilled multiple times; — requirements relating to methods or equipment associated with user filling of containers unless they are dedicated accessories (a component necessary for primary function, whether included in the original kitted product or not); — NISs intended for dental use; — NISs intended for different routes of administration (e.g. intravenous, intrathecal, intraocular). NOTE These products that are excluded might benefit from elements in this document but might not completely fulfil the basic safety and effectiveness of such products.

  • Standard
    69 pages
    English language
    sale 15% off
  • Standard
    72 pages
    French language
    sale 15% off
ISO
ISO 11608-6:2022(Main)
Needle-based injection systems for medical use — Requirements and test methods — Part 6: On-body delivery systems

This document specifies requirements and test methods for On-Body Delivery Systems (OBDS) needle-based injection systems (NISs) for single patient use, intended for subcutaneous, intramuscular or intradermal delivery of a discrete volume (bolus) of medicinal product, through needles or soft cannulas, incorporating pre-filled or user-filled, replaceable or non-replaceable containers. NOTE 1 Although technically a device using a soft cannula is not “needle-based”, the soft cannula is placed by a needle and can be included in this classification. NOTE 2 Some requirements and methods are already established and included in other parts of the ISO 11608 series. Infusion pumps that are designed for continuous delivery at a specific rate required to achieve and/or maintain a desired plasma medicinal product concentration are excluded from this document. However, while this document is not intended to directly apply to these pump products, it does contain requirements and test methods that can be used to help design and evaluate them. NOTE 3 They are covered by IEC 60601-2-24 (if electronic) or ISO 28620 (if non-electronic).

  • Standard
    20 pages
    English language
    sale 15% off
50