ISO/TC 34/SC 9/WG 3 - Method validation
Méthode de validation
General Information
This document specifies the protocol for the verification of reference methods and validated alternative methods for implementation in the user laboratory. This document is applicable to the verification of methods used for the analysis (detection and/or quantification), confirmation and typing of microorganisms in: — products intended for human consumption; — products intended for animal feeding; — environmental samples in the area of food and feed production, handling; — samples from the primary production stage. This document is, in particular, applicable to bacteria and fungi. Some clauses can be applicable to other (micro)organisms or their metabolites, to be determined on a case-by-case basis. The technical protocols for the verification of validated qualitative methods and validated quantitative methods are described in Clauses 5 and 6. The technical protocol for the verification of validated alternative confirmation and typing methods is described in Clause 7. The protocols for the verification of non-validated reference methods are described in Annex F.
- Standard70 pagesEnglish languagesale 15% off
- Standard80 pagesFrench languagesale 15% off
- Draft69 pagesEnglish languagesale 15% off
- Draft79 pagesFrench languagesale 15% off
This document specifies the general principles and the technical protocols (based on orthogonal, factorial studies) for the validation of non-proprietary methods for microbiology of the food chain. This document is applicable to the validation of methods used for the analysis (detection or quantification) of microorganisms in: — products intended for human consumption; — products intended for animal feeding; — environmental samples in the area of food and feed production, handling; — samples from the primary production stage. This document is, in particular, applicable to bacteria and fungi. Some clauses can be applicable to other (micro)organisms or their metabolites, to be determined on a case-by-case basis. This document specifies protocols for the validation against a reference method for both quantitative and qualitative methods. This document also provides a protocol for the validation of quantitative methods without a reference method. Qualitative methods cannot be validated without a reference method in accordance with this document. NOTE ISO 16140-2 specifies the general principle and the technical protocol for the validation of alternative, mostly proprietary, methods against a reference method. This document is only applicable to the validation of methods that are fully specified with regard to all relevant parameters (including tolerances on temperatures and specifications on culture media) and that have already been optimized. Methods that have been validated in accordance with this document can be used by the laboratories of the specified population of laboratories.
- Standard34 pagesEnglish languagesale 15% off
- Standard34 pagesEnglish languagesale 15% off
- Standard38 pagesFrench languagesale 15% off
- Standard38 pagesFrench languagesale 15% off
This document specifies the general principles and the technical protocols for single-laboratory validation of methods for microbiology in the food chain. The protocols in this document only validate the method for the laboratory conducting the study. This document is applicable to single-laboratory validation of: — methods used in the analysis (detection or quantification) of microorganisms in: — products intended for human consumption; — products intended for animal feeding; — environmental samples in the area of food and feed production, handling; — samples from the primary production stage; — methods for the confirmation or typing of microorganisms. This validation will replace only the confirmation or typing procedure of a specified method (see Annex G). This document is, in particular, applicable to bacteria and fungi. Some clauses can be applicable to other (micro)organisms or their metabolites, to be determined on a case-by-case basis. Single-laboratory validation is required if an interlaboratory validation in accordance with ISO 16140-2 is not appropriate. Possible applications are: — validation of an in-house method; — method evaluation study in the validation process of a reference method in accordance with ISO 17468; — extension of the scope of an ISO 16140-2 validated method, e.g. category extension or test portion size; — modifications of existing methods. Single-laboratory validation is the second step in the standardization of a reference method (see ISO 17468). It is only applicable to methods that are fully specified with regard to all relevant parameters (including tolerances on temperatures and specifications on culture media) and that have already been optimized.
- Standard46 pagesEnglish languagesale 15% off
- Standard46 pagesEnglish languagesale 15% off
- Standard49 pagesFrench languagesale 15% off
- Standard49 pagesFrench languagesale 15% off
This document specifies the general principle and the technical protocol for the validation of alternative confirmation methods for microbiology in the food chain. This document compares the result of the alternative confirmation method against the confirmation procedure of a reference method or, if needed, a reference confirmation method (e.g. whole genome sequencing). This document is applicable to the validation of alternative confirmation methods used for the analysis (detection or quantification) of isolated microorganisms in: — products intended for human consumption; — products intended for animal feeding; — environmental samples in the area of food and feed production, handling; — samples from the primary production stage. Validated alternative confirmation methods can be used to replace (partly or completely) the confirmation procedure described in: — the reference method; — an alternative method validated in accordance with ISO 16140-2 only if one of the isolation agars specified in the validation study of the alternative confirmation method is used. This document is also applicable to the validation of alternative typing methods, where the reference method can be, for example, a serological method (e.g. serotyping of Salmonella) or a molecular method (e.g. typing of Shiga toxin-producing E. coli). This document is, in particular, applicable to bacteria and fungi. Some clauses can be applicable to other (micro)organisms, to be determined on a case-by-case basis. Validation studies in accordance with this document are primarily intended to be performed by organizations or expert laboratories involved in method validation, but can also be used by a single laboratory, especially when performing in-house validation under certain conditions (see ISO 16140-4).
- Standard25 pagesEnglish languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
ISO 17468:2016 gives technical requirements and guidance on the establishment or revision of standardized reference methods for the analysis (detection or quantification) of microorganisms in - products intended for human consumption and for the feeding of animals, - environmental samples in the area of food/feed production and food/feed handling, and - samples from the primary production stage. It defines the technical stage (or early stage) of the establishment of a new standardized reference method or of the revision of an existing standardized reference method. It includes, in particular, requirements and guidance on the validation of the selected method. It is intended to be implemented in particular by ISO/TC 34/SC 9 and its corresponding structure at CEN level, CEN/TC 275, Food analysis - Horizontal methods, Working Group 6, Microbiology of the food chain.
- Standard5 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
ISO 16140-2:2016 specifies the general principle and the technical protocol for the validation of alternative, mostly proprietary, methods for microbiology in the food chain. Validation studies according to ISO 16140-2:2016 are intended to be performed by organizations involved in method validation. It is applicable to the validation of methods for the analysis (detection or quantification) of microorganisms in - products intended for human consumption, - products intended for animal feeding, - environmental samples in the area of food and feed production, handling, and - samples from the primary production stage. It is in particular applicable to bacteria and fungi. Some clauses of ISO 16140-2:2016 could be applicable to other (micro) organisms or their metabolites on a case-by-case-basis. In the future, guidance for other organisms (e.g. viruses and parasites) will be included in ISO 16140:2016 (all parts).
- Standard66 pagesEnglish languagesale 15% off
- Standard69 pagesFrench languagesale 15% off
ISO 16140-1:2016 defines general terms and definitions relating to method validation of microbiology in the food chain. It is applicable to the validation of methods for the analysis (detection or quantification) of microorganisms in - products intended for human consumption, - products intended for animal feeding, - environmental samples in the area of food and feed production, handling, and - samples from the primary production stage.
- Standard12 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
- Draft13 pagesEnglish languagesale 15% off
- Draft13 pagesEnglish languagesale 15% off
- Draft14 pagesFrench languagesale 15% off
ISO 16140:2003 defines the general principle and the technical protocol for the validation of alternative methods in the field of microbiological analysis of food, animal feeding stuffs and environmental and veterinary samples for the validation of alternative methods which can be used in particular in the framework of the official control, and the international acceptance of the results obtained by the alternative method. It also establishes the general principles of certification of these alternative methods, based on the validation protocol defined in ISO 16140:2003. Where an alternative method is used on a routine basis for internal laboratory use without the requirement to meet (higher) external criteria of quality assurance, a less stringent comparative validation of the alternative method than that set in ISO 16140:2003 may be appropriate.
- Standard74 pagesEnglish languagesale 15% off
- Standard85 pagesFrench languagesale 15% off