SC 22E - Stabilized power supplies

IEC 62909-2:2019 specifies GCPC interface requirements for particular distributed energy resources, namely electric vehicle (EV), battery, and photovoltaic (PV) systems. These requirements are in addition to the general requirements given in IEC 62909-1.
This International Standard is to be used in conjunction with IEC 62909-1:2017.
The clauses of particular requirements in this document supplement or modify the corresponding clauses in IEC 62909-1:2017. Where the text of subsequent clauses indicates an "addition" to or a "replacement" of the relevant requirement, test specification or explanation of IEC 62909-1:2017, these changes are made to the relevant text of IEC 62909­1:2017. Where no change is necessary and the clause is applicable, the words "The provisions of IEC 62909-1:2017, Clause XX shall apply" are used. Additional clauses, tables, figures and notes which are not included in IEC 62909-1:2017, are numbered starting from 101.

IEC 62909-1:2017 specifies general aspects of bi-directional grid-connected power converters (GCPC), consisting of a grid-side inverter with two or more types of DC-port interfaces on the application side with system voltages not exceeding 1 000 V AC or 1 500 V DC. In special cases, a GCPC will have only one DC-port interface, which is connected to a bidirectional energy-storage device. This document includes terminology, specifications, performance, safety, system architecture, and test-case definitions. The "system architecture" defines interaction between the inverter and converters. Requirements which are common, general, and independent of special characteristics of individual generators and bi-directional storages are defined.
This document does not cover uninterruptible power supply (UPS) systems, which fall under the scope of IEC 62040 (all parts). Requirements for internal and external digital communication might be necessary; the interface requirements including communication with distributed energy resources are provided in a future part of IEC 62909. All EMC requirements are defined by reference to existing IEC standards. External communication requirements are out of scope of this document.

IEC 61204-7:2016 specifies the safety requirements for switch mode power supply (SMPS) units supplied by source voltages up to 1 000 V AC or 1 500 V DC providing AC and/or DC output(s), except inverter output(s) establishing AC mains. This product standard covers both stand-alone and component SMPS as defined in this document. DC power and distribution equipment which provides, distributes, monitors, and controls isolated secondary circuit power to other equipment typically used in information and communication technology equipment installations. This edition includes the following significant technical changes with respect to the previous edition:
a) use of IEC 62477-1 as reference document, instead of IEC 60950-1;
b) modification of the title by deleting the wording "DC output-" and adding "switch mode".

IEC 61204-3:2016 specifies the electromagnetic compatibility (EMC) requirements for switch mode power supply (SMPS) units supplied by source voltages up to 1 000 V AC or 1 500 V DC providing AC and/or DC output(s), except inverter output(s) establishing AC mains. This edition includes the following significant technical changes with respect to the previous edition:
a) the title has been changed by deleting the wording "DC output-" from the title and adding "switch mode" in the title;
b) changes in the scope: 1.1.1 Equipment covered by this document;
c) update of the normative references to the latest editions or dated references;
d) change of wording or/and notes regarding the requirements of CENELEC Guide 24 and IEC Guide 107;
e) revision of the emission limits to align with the latest editions of the applicable normative references;
f) revision of the immunity requirements to align with the latest editions of the applicable normative references;
g) correction of typographical errors.

IEC 61204-3:2011 specifies electromagnetic compatibility (EMC) requirements for power supply units (PSUs) providing d.c. output(s) with or without auxiliary a.c. output(s), operating from a.c. or d.c. source voltages up to 600 V a.c. or 1 000 V d.c. The main changes with respect to the previous edition are listed below:
- Update of the scope to align with IEC 61204-7.
- Update of the normative references to the latest editions.
- Change of the definitions of environments to align with the latest editions of the applicable normative references.
- Revision of the applicability of tests to different power supply technologies.
- Revision of the emission limits and requirements to align with the latest editions of the applicable normative references.
- Revision of the immunity limits and requirements to align with the latest editions of the applicable normative references.
- Clarification of the different classes of PSU.

Specifies the safety requirements for POWER SUPPLY units providing DC output(s) with or without auxiliary a.c. output(s) operating from a.c. or d.c. source voltages up to 600 V a.c. or 1 000 V d.c.

Describes a method of specifying requirements for low-voltage power supply devices (including switching types) providing d.c. output(s) up to 200 V d.c. at a power level up to 30 kW, operating from a.c. or d.c. source voltages of up to 600 V. The devices are for use within class I equipment or for free-standing operation when used with adequate electrical and mechanical protection, except for medical applications and toys, where special considerations apply.

Describes a method of specifying requirements for low-voltage power supply devices (including switching types) providing d.c. output(s) up to 200 V d.c. at a power level up to 30 kW, operating from a.c. or d.c. source voltages of up to 600 V. The devices are for use within class I equipment or for free-standing operation when used with adequate electrical and mechanical protection, except for medical applications and toys, where special considerations apply. This consolidated version consists of the first edition (1993) and its amendment 1 (2001). Therefore, no need to order amendment in addition to this publication.

Applies to power supplies for general purpose applications.

Specifies electromagnetic compatibility (EMC) requirements for power supply units (PSUs) providing d.c. output(s) up to 200 V at a power level of up to 30 kW, operating from a.c. or d.c. source voltages of up to 600 V. The contents of the corrigendum of December 2000 have been included in this copy.