SIST EN 14450:2018/kprA1:2023
(Amendment)Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets
This document establishes the basis for testing and classifying secure safe cabinets.
The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations.
Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - Sicherheitsschränke
Unités de stockage en lieu sûr - Exigences, classification et méthodes d'essai de résistance à l'effraction - Armoires et mobilier de sécurité
Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja protivlomne odpornosti - Varnostne omare - Dopolnilo A1
General Information
- Status
- Not Published
- Public Enquiry End Date
- 16-Apr-2023
- Technical Committee
- PPV - Secure storage units and door locks
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 09-Jan-2024
- Due Date
- 14-Jan-2024
- Completion Date
- 09-Jan-2024
Relations
- Effective Date
- 01-Feb-2024
- Effective Date
- 08-Jun-2022
Overview
EN 14450:2017/prA1 (CEN) - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets.
This European standard defines test methods and classification criteria for secure cabinets intended for lower-risk applications (security resistance below EN 1143-1). The amendment (prA1) updates terminology from “secure safe cabinets” to secure cabinets, integrates distributed system locks (EN 17646), and revises permitted cable holes and related requirements.
Key topics and requirements
- Scope and definitions
- Defines a secure cabinet as a storage unit protecting contents against burglary, with at least one internal side ≤ 1 m and access via a lockable door or lid.
- Covers free‑standing, wall and floor cabinets and how installation affects protection.
- Classification
- Two classes: S1 and S2 with quantified resistance limits (e.g., minimum resistance for access: 2.00 SU for S1, 5.00 SU for S2).
- Tool and time allowances expressed as tool points (e.g., 40 TP for S1, 60 TP for S2).
- Locking and anchoring
- Minimum locking: one lock complying with EN 1300 or EN 17646 (distributed systems).
- Anchoring strength requirements per anchoring hole (e.g., 20 kN for S1, 30 kN for S2).
- Perforations and cable entries
- Only permitted holes: locks, anchoring and cables.
- Up to four cable holes permitted; each ≤ 100 mm, located in the cabinet body (plus one in the door), and at least 200 mm apart.
- Testing procedures
- Includes test specimen requirements and methods such as tool attack procedure and marking/test documentation rules.
- Marking and documentation
- Product marking must include classification and lock class (EN 1300 or EN 17646) and be supported by technical documentation.
Applications
- Suitable for retail stores, small businesses, hotels, medical practices, pharmacies, offices, and data media storage where moderate burglary resistance is needed.
- Used by manufacturers designing secure cabinets, test laboratories performing conformity testing, specifiers and procurement teams, insurance assessors, and installers ensuring correct anchoring and compliance.
Related standards
- EN 17646 - Distributed systems: lock classification (integrated by prA1).
- EN 1300 - High-security locks: lock classification.
- EN 1143-1 - High-security safes and strongrooms (higher resistance benchmark; EN 14450 covers lower-resistance products).
EN 14450:2017/prA1 provides clear, measurable criteria for designers, testers and buyers to evaluate burglary resistance, making it a practical tool for specifying and certifying secure cabinets in lower-risk environments. Keywords: EN 14450:2017/FprA1, secure cabinets, secure storage units, burglary resistance, classification, EN 17646, EN 1300.
Frequently Asked Questions
SIST EN 14450:2018/kprA1:2023 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets". This standard covers: This document establishes the basis for testing and classifying secure safe cabinets. The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations.
This document establishes the basis for testing and classifying secure safe cabinets. The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations.
SIST EN 14450:2018/kprA1:2023 is classified under the following ICS (International Classification for Standards) categories: 13.310 - Protection against crime; 35.220.99 - Other data storage devices. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14450:2018/kprA1:2023 has the following relationships with other standards: It is inter standard links to SIST EN 14450:2018+A1:2024, SIST EN 14450:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 14450:2018/kprA1:2023 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14450:2018/oprA1:2023
01-april-2023
Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja
protivlomne odpornosti - Varnostne omare - Dopolnilo A1
Secure storage units - Requirements, classification and methods of test for resistance to
burglary - Secure cabinets
Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des
Widerstandes gegen Einbruchdiebstahl - Sicherheitsschränke
Unités de stockage en lieu sûr - Exigences, classification et méthodes d'essai de
résistance à l'effraction - Armoires et mobilier de sécurité
Ta slovenski standard je istoveten z: EN 14450:2017/prA1
ICS:
13.310 Varstvo pred kriminalom Protection against crime
35.220.99 Druge naprave za Other data storage devices
shranjevanje podatkov
SIST EN 14450:2018/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 14450:2018/oprA1:2023
SIST EN 14450:2018/oprA1:2023
DRAFT
EUROPEAN STANDARD
EN 14450:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2023
ICS 13.310
English Version
Secure storage units - Requirements, classification and
methods of test for resistance to burglary - Secure cabinets
Unités de stockage en lieu sûr - Exigences, Wertbehältnisse - Anforderungen, Klassifizierung und
classification et méthodes d'essai de résistance à Methoden zur Prüfung des Widerstandes gegen
l'effraction - Armoires et mobilier de sécurité Einbruchdiebstahl - Sicherheitsschränke
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 263.
This draft amendment A1, if approved, will modify the European Standard EN 14450:2017. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14450:2017/prA1:2023 E
worldwide for CEN national Members.
SIST EN 14450:2018/oprA1:2023
EN 14450:2017/prA1:2023 (E)
Contents Page
European foreword . 3
1 Modification to the title . 4
2 Modification to the Introduction . 4
3 Modification to Clause 1, “Scope” . 4
4 Modification to Clause 2, “Normative References” . 4
5 Modifications to Clause 3, “Terms and definitions” . 4
6 Modification to 4.1, “Classification” . 5
7 Modifications to 4.2, “Requirements” . 5
8 Modification to Clause 5, “Technical documentation” . 5
9 Modificati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...