iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14450:2017/FprA1

(Amendment)

Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets

Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets

This document establishes the basis for testing and classifying secure safe cabinets.
The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations.

Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des Widerstandes gegen Einbruchdiebstahl - Sicherheitsschränke

Unités de stockage en lieu sûr - Exigences, classification et méthodes d'essai de résistance à l'effraction - Armoires et mobilier de sécurité

Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja protivlomne odpornosti - Varnostne omare - Dopolnilo A1

General Information

Status
Not Published
Publication Date
19-Nov-2023
ICS
13.310 - Protection against crime
Technical Committee
CEN/TC 263 - Secure storage of cash, valuables and data media
Drafting Committee
CEN/TC 263/WG 1 - Burglary resistance
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
21-Sep-2023
Due Date
12-Jul-2024
Completion Date
21-Sep-2023
Ref Project
SIST EN 14450:2018/kprA1:2023 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets

Relations

Merged Into
EN 14450:2017+A1:2023 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets
Effective Date
04-Oct-2023
Amends
EN 14450:2017 - Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure safe cabinets
Effective Date
08-Jun-2022

Buy Standard

EN 14450:2018/oprA1:2023EN 14450:2018/oprA1:2023
PreviousNext
Draft
EN 14450:2018/oprA1:2023
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
SIST EN 14450:2018/oprA1:2023
01-april-2023
Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja
protivlomne odpornosti - Varnostne omare - Dopolnilo A1
Secure storage units - Requirements, classification and methods of test for resistance to
burglary - Secure cabinets
Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des
Widerstandes gegen Einbruchdiebstahl - Sicherheitsschränke
Unités de stockage en lieu sûr - Exigences, classification et méthodes d'essai de
résistance à l'effraction - Armoires et mobilier de sécurité
Ta slovenski standard je istoveten z: EN 14450:2017/prA1
ICS:
13.310 Varstvo pred kriminalom Protection against crime
35.220.99 Druge naprave za Other data storage devices
shranjevanje podatkov
SIST EN 14450:2018/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 14450:2018/oprA1:2023
SIST EN 14450:2018/oprA1:2023
DRAFT
EUROPEAN STANDARD
EN 14450:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2023
ICS 13.310
English Version
Secure storage units - Requirements, classification and
methods of test for resistance to burglary - Secure cabinets
Unités de stockage en lieu sûr - Exigences, Wertbehältnisse - Anforderungen, Klassifizierung und
classification et méthodes d'essai de résistance à Methoden zur Prüfung des Widerstandes gegen
l'effraction - Armoires et mobilier de sécurité Einbruchdiebstahl - Sicherheitsschränke
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 263.

This draft amendment A1, if approved, will modify the European Standard EN 14450:2017. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14450:2017/prA1:2023 E
worldwide for CEN national Members.

SIST EN 14450:2018/oprA1:2023
EN 14450:2017/prA1:2023 (E)
Contents Page
European foreword . 3
1 Modification to the title . 4
2 Modification to the Introduction . 4
3 Modification to Clause 1, “Scope” . 4
4 Modification to Clause 2, “Normative References” . 4
5 Modifications to Clause 3, “Terms and definitions” . 4
6 Modification to 4.1, “Classification” . 5
7 Modifications to 4.2, “Requirements” . 5
8 Modification to Clause 5, “Technical documentation” . 5
9 Modificati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14450:2017+A1:2023(Main)
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Secure cabinets
SIST EN 14450:2018+A1:2024

This document establishes the basis for testing and classifying secure cabinets.
The standard covers products meant for purposes where the security resistance required is less than that measured by EN 1143-1. Normally these products are used in lower risk situations.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1300:2023(Main)
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening
SIST EN 1300:2023

This document specifies requirements for high security locks (HSL) for reliability, resistance to burglary and manipulation with methods of testing. It also provides a scheme for classifying HSL in accordance with their assessed resistance to burglary and unauthorized opening.
It is applicable to mechanical and electronic HSL. For electronic locks used in a distributed system, see EN 17646 for further information.
The following features can be included as optional subjects but they are not mandatory:
a)   recognized code for preventing code altering and/or enabling/disabling parallel codes;
b)   recognized code for disabling time set up;
c)   integration of alarm components or functions;
d)   resistance to attacks with acids;
e)   resistance to X-rays;
f)   resistance to explosives;
g)   time functions.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15713:2023(Main)
Secure destruction of confidential and sensitive material - Code of practice
SIST EN 15713:2023

This document provides recommendations and requirements for the procedures, processes and performance monitoring to be implemented for the management and control of the physical destruction of confidential and sensitive material to ensure that such material is disposed of securely and safely.
This document can be referenced by anyone who processes such material on behalf of others and covers the following scenarios:
-   on site - using mobile equipment at the location of use (destruction equipment is brought to the confidential or sensitive material);
-   off site - transport followed by destruction using equipment at a destruction facility (the confidential or sensitive material is brought to the destruction equipment, such as used at a dedicated external facility operated by a service provider);
-   use of equipment at the Data Controller’s location (confidential or sensitive material and destruction equipment co-located, such as a shredder in a building occupied by a client or clients).
Destruction by erasure (e.g. crypto erasure, data overwriting, degaussing or other forms of magnetic/electronic erasure) is not covered in this document.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17646:2022(Main)
Secure storage units - Classification for high security locks according to their resistance to unauthorized opening - Distributed systems
SIST EN 17646:2022

This document is applicable to Distributed Systems (DS), i.e. high security locks with components which have a wired or wireless connection via a transmission system in order to execute fixed operating conditions using different individually fixed access possibilities.
Products which are to be tested on the basis of this document comply with the generally recognized state of the art at the time of testing. Due to the short innovation cycles in the field of electronic and, in particular, information technology applications, the technical possibilities available at the time of product development should also be taken into account during implementation.
Distributed systems can be used, for example, to operate high security locks of secure storage units (safes and strongrooms).
High security locks (HSL) are used in DS as locking unit.
This document does not apply for stand-alone HSL, which are not part of a distributed system. For these stand-alone HSL EN 1300 is applicable only.
The document will be revised with a frequency of 3 years as the research in the area of cryptography and relevant attacks evolve with high speed as well as the referenced standards.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1047-1:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and data inserts
SIST EN 1047-1:2019

This document specifies requirements for fire resisting data cabinets and diskette inserts.
Two methods of test are specified to determine the ability of fire resisting data cabinets to protect temperature and humidity sensitive contents from the effects of fire: a fire endurance test and a fire shock and impact test. Two levels of fire severity (S 60 and S 120) based upon time of fire exposure; and three protection classes (P, D and DIS) are specified using the maximum temperature increases and humidity values permitted within the storage space of the data cabinet.
Diskette inserts (DI 60 P/DIS and DI 120 P/DIS) are installed in data cabinets of protection class S 60 P or S 120 P, respectively, and subjected to a fire endurance test (see 5.1.2).
Requirements are also specified for test specimens, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures.
A scheme to classify the fire resisting data cabinets and diskette inserts from the test results is also given (see Table 1).
Diskette inserts are only installed in data cabinets having the same design as the series of protection class S 60 P and S 120 P, respectively, in which the insert has been tested in using methods defined in 5.1.2. Where several inserts are installed, they are built in one beside the other or one above the other from bottom to top, respectively. The volume and total height of the installed inserts do not exceed 50 % of the total internal volume or 50 % of the internal height, respectively, of the data cabinets into which they are installed. The dimensions of the insert can be adapted by increasing the width and depth to the corresponding dimensions of the data cabinets. A reduction of these dimensions as well as a change of the height is only admitted within the specified tolerance.
The temperature increases during type-tests on data cabinets and diskette inserts will be considered in deciding the permitted diskette insert installations. For a permitted installation, the temperature increase of the intended data cabinet ( ) does not exceed the temperature increase of the tested data cabinet ( ) in which the diskette insert has been type-tested by more than the difference between the maximum value for the diskette insert ( ) and the maximum admissible temperature increase (30 K), i.e   (See example in Annex B).
A description of the installation of the diskette inserts can be given in the technical documentation of the manufacturer.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15659:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units
SIST EN 15659:2019

This document specifies requirements for light fire storage units providing protection against fire.
The method of test is specified to determine the ability of light fire storage units to protect paper media from the effects of fire. Two levels of fire exposure periods (LFS 30 and LFS 60) are specified using the maximum temperature increase permitted within the storage space of the light fire storage unit.
Protection after the fire exposure of 30 min (LFS 30) or 60 min (LFS 60) is not ensured by this document, but by European Standard EN 1047-1. Requirements are also specified for the test specimen, the technical documentation for the test specimen, correlation of the test specimen with the technical documentation, preparation for type testing and test procedures.
A scheme to classify the light fire storage units from the test results is also given (see Table 1).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1143-1:2019(Main)
Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
SIST EN 1143-1:2019

This European Standard establishes the basis for testing and classifying free-standing safes, built-in safes (floor and wall), ATM safes and ATM bases, strongroom doors and strongrooms (with or without a door) according to their burglary resistance. This European Standard does not cover testing and classifying Deposit Systems and ATM systems.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1047-2:2019(Main)
Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container
SIST EN 1047-2:2019

This part of the European Standard EN 1047 specifies requirements for data rooms and data containers. It includes a method of test for the determination of the ability of data rooms and data containers to protect temperature and humidity sensitive data media (see 3.5) and hardware systems (see 3.6) from the effects of fire. A test method for measuring the resistance to mechanical stress (impact test) provided by data rooms type B and data containers is also specified.
Requirements are also specified for test specimens, the technical documentation of the test specimens, materials specimens, physical fittings, the correlation of test specimens with the technical documentation and the preparation for type testing, as test procedures as well as the series production.
In addition, a scheme to classify data rooms and data containers from the test results is given (see Table 1).
As well as providing protection against fire, correctly installed data rooms and data containers offer a defined protection against impacts caused by failure during fire of components and objects external to the data room or data container.
Data rooms and data containers having the same design, protection and construction features (type and thickness of construction and protective materials, rebate geometry, lockings, doors, etc.) will only be given the same protection classification as that of the test specimen if the tolerances are within the ranges specified in Clause 7.
NOTE   This European Standard does not regulate the use of data rooms in the meaning of the building laws of the respective countries. In the construction of data rooms, it is advised to consider the respective national requirements.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1143-2:2014(Main)
Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems
SIST EN 1143-2:2014

This European Standard specifies requirements and tests methods for deposit systems, and classifies the systems according to their burglary resistance and their resistance to the theft of deposits.
This European Standard comprises two types of deposit system:
-   Night safes which provide depositing services for the customers of financial institutions without giving access to the content of the night safe.
-   Deposit safes which enable the personnel of a company to place money or valuables in safe custody without giving access to the content of the deposit safe. The installation condition for deposit safe according to this European Standard is that the depositing functions are installed inside the premises of the company and are only disposable for the personnel of the company.
NOTE   Parts of a deposit system are a receiving unit, an input unit and in some cases, a chute.
This European Standard includes design requirements for deposit systems controlled by programmable controllers and for the software for these. Controller hardware testing is restricted to mechanical or electromechanical attacks of electric motors, sensors, coils and similar devices; but software testing as attempts to influence controller software or controller hardware is not part of this standard.
Deposit systems may have devices for functions such as user identification and/or counting and registration of money. Tests of and requirements for classification of such functions are not included.
This European Standard does not cover protection of persons using the deposit system or the prevention of fraud committed by operators of the deposit system.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1143-2:2024(Main)
Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems
kSIST FprEN 1143-2:2024

This document specifies requirements and tests methods for deposit systems, and classifies the systems according to their burglary resistance and their resistance to the theft of deposits.
This document comprises two types of deposit system:
—   Night safes which provide depositing services for the customers of financial institutions without giving access to the content of the night safe.
—   Deposit safes which enable the personnel of a company to place money or valuables in safe custody without giving access to the content of the deposit safe. The installation condition for deposit safe according to this document is that the depositing functions are installed inside the premises of the company and are only disposable for the personnel of the company.
NOTE   Parts of a deposit system are a receiving unit, an input unit and in some cases, a chute.
This document includes design requirements for deposit systems controlled by programmable controllers and for the software for these. Controller hardware testing is restricted to mechanical or electromechanical attacks of electric motors, sensors, coils and similar devices; but software testing as attempts to influence controller software or controller hardware is not part of this document.
Deposit systems can have devices for functions such as user identification and/or counting and registration of money. Tests of and requirements for classification of such functions are not included.
This document does not cover protection of persons using the deposit system or the prevention of fraud committed by operators of the deposit system.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day