EN 1143-1:2019

SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST EN 1143-1:2012
Varnostne shranjevalne enote - Zahteve, klasifikacija in metode preskušanja
protivlomne odpornosti - 1. del: Blagajne, bankomatne blagajne, vrata trezorskih
prostorov in trezorski prostori
Secure storage units - Requirements, classification and methods of test for resistance to
burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms
Wertbehältnisse - Anforderungen, Klassifizierung und Methoden zur Prüfung des
Widerstandes gegen Einbruchdiebstahl - Teil 1: Wertschutzschränke,
Wertschutzschränke für Geldautomaten, Wertschutzraumtüren und Wertschutzräume
Unités de stockage en lieux sûrs - Prescriptions, classification et méthodes d’essai pour
la résistance à l'effraction - Partie 1 : Coffres forts, distributeurs automatiques de billets
(DAB), portes fortes et chambres fortes
Ta slovenski standard je istoveten z: EN 1143-1:2019
ICS:
13.310 Varstvo pred kriminalom Protection against crime
35.220.99 Druge naprave za Other data storage devices
shranjevanje podatkov
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 1143-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 13.310 Supersedes EN 1143-1:2012
English Version
Secure storage units - Requirements, classification and
methods of test for resistance to burglary - Part 1: Safes,
ATM safes, strongroom doors and strongrooms
Unités de stockage en lieux sûrs - Prescriptions, Wertbehältnisse - Anforderungen, Klassifizierung und
classification et méthodes d'essai pour la résistance à Methoden zur Prüfung des Widerstandes gegen
l'effraction - Partie 1 : Coffres forts, distributeurs Einbruchdiebstahl - Teil 1: Wertschutzschränke,
automatiques de billets (DAB), portes fortes et Wertschutzschränke für Geldautomaten,
chambres fortes Wertschutzraumtüren und Wertschutzräume
This European Standard was approved by CEN on 1 March 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1143-1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Classification and requirements . 9
4.1 Classification . 9
4.2 General requirements . 9
4.2.1 Safes, strongroom doors and strongrooms. 9
4.2.2 ATM safes . 9
4.2.3 Boltwork cover plate . 10
4.2.4 Cable hole . 10
4.2.5 User instructions . 10
4.3 Additional requirements for EX designation . 10
4.4 Additional requirements for GAS designation . 10
4.5 Additional requirements for CD designation . 10
4.6 Additional requirements for T2 designation . 11
5 Technical documentation . 15
6 Test specimen . 16
7 Tool attack test . 16
7.1 Principle . 16
7.2 Testing team. 17
7.3 Apparatus . 17
7.3.1 Attack tools . 17
7.3.2 Clock . 17
7.3.3 Test blocks . 18
7.4 Test criteria . 18
7.5 Testing programme . 19
7.5.1 Free-standing safes . 19
7.5.2 Built-in safes . 19
7.5.3 Strongrooms. 19
7.5.4 ATM safes . 20
7.6 Test conditions . 20
7.7 Procedure. 22
7.8 Operating time measuring . 23
7.9 Calculation of resistance values . 24
7.10 Test record . 24
8 Anchoring strength test . 24
8.1 Free-standing safes . 24
8.1.1 Principle . 24
8.1.2 Loading equipment . 25
8.1.3 Procedure. 25
8.1.4 Expression of test results . 25
8.1.5 Test criteria . 26
8.2 ATM safes . 26
8.2.1 Principle . 26
8.2.2 Loading equipment . 26
8.2.3 Procedure . 26
8.2.4 Expression of results . 28
8.2.5 Test criteria . 28
9 EX explosive test . 28
9.1 Principle . 28
9.2 Test specimen . 28
9.3 Explosives . 28
9.4 Determination of active explosive charge mass . 29
9.5 Conditions for explosive attack test . 29
9.5.1 Safes and ATM safes . 29
9.5.2 Strongroom doors and strongrooms . 29
9.6 Calculation of resistance values for the post-detonation tool attack . 30
9.7 Test record . 30
10 GAS explosive test . 30
10.1 Principle . 30
10.2 Test specimen . 30
10.3 Gas . 31
10.4 Determination of gas charge volume . 31
10.5 Test equipment for gas attack testing . 32
10.6 Procedure for gas attack testing . 32
10.7 Calculation of resistance values for the post-detonation tool attack . 32
10.8 Test record .
...