iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 45510-1:1999

(Main)

Guide for procurement of power station equipment - Part 1: Common clauses

Guide for procurement of power station equipment - Part 1: Common clauses

This standard gives guidance on writing the technical specification for the procurement of equipment for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke - Teil 1: Allgemeingültige Festlegungen

Die vorliegende Norm ist eine Anleitung zur Erstellung der technischen Spezifikation für die Beschaffung von Ausrüstung für den Einsatz in Anlagen zur Erzeugung von elektrischer Energie (Kraftwerke). Dieser Leitfaden ist nicht anwendbar auf Ausrüstung zur Verwendung im Nuklearbereich von Kernkraftwerken. Bei der Erstellung des Leitfadens wurden keine weiteren Möglichkeiten zur Anwendung der beschriebenen Ausrüstung in Betracht gezogen.

Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité - Partie 1: Clauses communes

La présente norme donne des recommandations pour la rédaction de la spécification technique nécessaire a l'acquisition d'équipement pour les centrales de production d'électricité. Ce guide d'achat n'est pas applicable a ce type d'équipement lorsque celui-ci est destiné a l'îlot nucléaire des centrales nucléaires. D'autres applications possibles de ce type d'équipement n'ont pas été prises en considération dans la préparation de ce guide.

Vodilo za nabavo opreme elektrarn –1. del: Splošna določila

General Information

Status
Published
Publication Date
31-Mar-1999
ICS
27.100 - Power stations in general
Technical Committee
IEHT - Electrotechnics - Hydraulic turbins
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-1999
Due Date
01-Apr-1999
Completion Date
01-Apr-1999
Ref Project
EN 45510-1:1997 - Guide for procurement of power station equipment - Part 1: Common clauses

Buy Standard

EN 45510-1:1999EN 45510-1:1999
PreviousNext
Standard
EN 45510-1:1999
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke - Teil 1: Allgemeingültige FestlegungenGuide pour l'acquisition d'équipements destinés aux centrales de production d'électricité - Partie 1: Clauses communesGuide for procurement of power station equipment - Part 1: Common clauses27.100Elektrarne na splošnoPower stations in generalICS:Ta slovenski standard je istoveten z:EN 45510-1:1997SIST EN 45510-1:1999en01-april-1999SIST EN 45510-1:1999SLOVENSKI
STANDARD



SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 45510-8-1:1999(Main)
Guide for procurement of power station equipment - Part 8-1: Control and instrumentation
EN 45510-8-1:1998

This standard gives guidance on writing the technical specification for the procurement of Control and Instrumentation (C&I) for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61000-6-5:2016/AC:2018(Corrigendum)
Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment
EN 61000-6-5:2015/AC:2018-01

IEC - Corrected version
2018-09-24 - GEM - offer under CLC D159/C070

  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61000-6-5:2016(Main)
Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environments
EN 61000-6-5:2015

This part of IEC 61000 specifies EMC immunity requirements which apply to electrical and
electronic equipment intended for use in power stations and substations, as described below.
Immunity requirements for electromagnetic phenomena with spectral contributions in the
frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies
or for phenomena where no requirements are specified.
This international standard sets immunity test requirements for equipment intended for use in
the generation, transmission and distribution of electricity and related telecommunication
systems. The electromagnetic environments encompassed by this standard are those which
exist at locations
• in power stations, and
• in high and medium voltage substations.
Installations to generate or convert into electrical power inside industrial facilities are also
covered by this standard as long as they, at their primary electrical connection, cannot be
directly connected to the LV power network, e.g. where the generator output voltage is
medium voltage or higher. Power installations that directly provide power into the low voltage
network (such as photovoltaic cells or combined heat power systems in private houses) are
not covered by this standard.
NOTE 1 In general, power stations comprise installations which are mainly built to convert some kind of primary
energy into electrical energy. Moreover, these power stations are connected to the medium or high voltage power
system directly or via a step-up transformer.
The object of this standard is to define immunity test requirements for equipment defined in
the scope in relation to continuous and transient, conducted and radiated disturbances,
including electrostatic discharges.
The immunity test requirements are given on a port-by-port basis, and selected according to
the location, with differentiated levels for equipment to be installed in power stations or
substations. In special cases, situations will arise where the level of electromagnetic
disturbances may exceed the levels specified in this standard; in these instances, special
mitigation measures should be adopted.
The immunity requirements are suitable for satisfying the particular needs related to the
functions and tasks of equipment and systems, for which reliable operation is required under
realistic electromagnetic conditions; in this respect, this standard establishes performance
criteria for different functional requirements.
This generic EMC immunity standard is applicable if no relevant dedicated product or productfamily
EMC immunity standard exists. According to IEC Guide 107, this generic standard
should be considered for the preparation or revision of any EMC standard referring to specific
products used in power stations and substations.Non-electronic high voltage and power equipment (primary system) are excluded from the
scope of this standard.
Emission requirements are not within the scope of this standard and are covered by relevant
product or product-family standards

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62504:2014(Main)
General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions
CWA 45547:2004

EN IEC 62504 is of assistance in the common understanding of terms and definitions, relevant for general lighting with LED technology. The terms included are those already available in IEC LED standards or used in manufacturers' literature. This standard provides descriptive terms (like “LED light sources”) and measurable terms when modified from IEC 60050-845 (like “colour rendering index”).

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 472 S1:1996/AC:2014(Corrigendum)
Nominal voltages for low-voltage public electricity supply systems
HD 472 S1:1989/AC:2013
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50441-2:2012(Main)
Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 2
EN 45510-2-7:2002

This European Standard specifies the constructional details and performance requirements for cables for indoor Residential Cabling Systems characterized up to 100 MHz. Cables in this European Standard are based on the common design rules specified in EN 50290-2-1 and are specifically intended for supporting ICT and BCT applications (telephone, computer and TV services) as specified in EN 50173-4. The cables covered in this European Standard are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electrical power supply of public utility mains. Cables covered in this European Standard may however be subjected to voltages of not more than 300 V a.c. or 450 V d.c and comply with the requirements of the Low Voltage Directive. The maximum current rating per conductor is 3 A/mm? unless otherwise specified in the relevant detail specification.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50441-1:2012(Main)
Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1
EN 45510-2-5:2002

This European Standard specifies the constructional details and performances requirements for cables for indoor residential cabling systems characterized up to 100 MHz. Cables in this European Standard are based on the common design rules specified in EN 50290-2-1 and are specifically intended for supporting ICT and BCT applications (telephone, computer and TV services) as specified in EN 50173-4. The cables covered in this European Standard are intended to operate with voltages and currents normally encountered in communications systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electrical power supply of public utility mains. Cables covered in this European Standard may however be subjected to voltages of not more than 300 V a.c. or 450 V d.c. and comply with the requirements of the Low Voltage Directive. The maximum current rating per conductor is 3 A/mm? unless otherwise specified in the relevant detail specification.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50441-4:2012(Main)
Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 4
EN 45510-2-8:2004

This European Standard specifies the constructional details and performance requirements for cables for installation in indoor residential cabling systems characterized up to 1 200 MHz. Cables in this European Standard are based on the common design rules specified in EN 50290-2-1 and are specifically intended for supporting ICT and BCT applications (telephone, computer and TV services) as specified in EN 50173-4. The cables covered in this European Standard are intended to operate with voltages and currents normally encountered in communication systems. These cables are not intended to be used in conjunction with low impedance sources, for example, the electrical power supply of public utility mains. Cables covered in this European Standard may however be subjected to voltages of not more than 300 V a.c or 450 V d.c and comply with the requirements of the Low Voltage Directive. The maximum current rating per conductor is 3 A/mm? unless otherwise specified in the relevant detail specification.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60038:2011(Main)
CENELEC standard voltages
EN 60038:2011

IEC 60038:2009 specifies standard voltage values which are intended to serve as preferential values for the nominal voltage of electrical supply systems, and as reference values for equipment and system design. This seventh edition supersedes the sixth edition (1993), its Amendment 1 (1994) and its Amendment 2 (1997). It constitutes a technical revision. The significant technical changes are:
- the addition of the values of 230 V (50 Hz) and 230/400 V (60 Hz) to Table 1;
- the replacement of the utilization voltage range at LV by a reference to the relevant standard and an informative annex;
- the addition of the value of 30 kV to Table 3;
- the replacement of the value of 1 050 kV by 1 100 kV in Table 5.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45510-2-9:2008(Main)
Guide for procurement of power station equipment -- Part 2-9: Electrical equipment - Cabling systems
EN 45510-2-9:2008

This standard gives guidance on writing the technical specification for the procurement of equipment for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide on cabling systems deals with a wide range of activities and may be used for any or all of these activities by selection of the relevant parts e.g.:;provision of support for cable;;laying of cable;;completion of cable ends; The Guide covers the installation of power cable up to and including 20,8/36 (42) kV and the supply and installation of control and instrumentation cable. The supply of power cable is covered by EN 45510-2-8. The Guide includes the installation of protective conductor cable for earthing and equipotential bonding up to the main earthing busbar(s), but not the below ground earth-electrode network. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates to potential purchasers how their specification should be prepared so that;the equipment type and capacity interfaces correctly with other elements of the systems,;predicted performance is achieved,;ancillary equipment is properly sized,;reliability, availability and safety requirements are achieved,;proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not cover;any commercial, contractual or legal issues which are normally in separate parts of an enquiry,;any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day