SIST EN 16510-1:2018
(Main)Residential solid fuel burning appliances - Part 1: General requirements and test methods
Residential solid fuel burning appliances - Part 1: General requirements and test methods
This European Standard is applicable to residential solid fuel burning appliances.
This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as appliance(s)) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances.
This European Standard also covers CO, NOx, OGC and particulate matter (PM / PME - see Annex F) emission test methods, however this European Standard does not contain any values for the limit on these emissions.
Appliances receiving combustion air through ductwork from outside the external envelope, which is not air tight, are not considered roomsealed.This European Standard is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron.
This European Standard is not applicable to appliances with a boiler intended for water systems having
- water temperatures above 110 °C and/or an operating pressure of more than 3 bar;
- direct contact with sanitary hot water.
This European Standard does not cover appliances to be operated with ventilating systems which are intended to operate with pressure below - 15 Pa in the room of installation of the appliance in relation to the outside atmosphere.
This European Standard does not cover appliances intended to carry the load of a chimney.
Häusliche Heizgeräte für feste Brennstoffe - Teil 1: Allgemeine Anforderungen und Prüfverfahren
Diese Europäische Norm gilt für häusliche Feuerstätten, die mit festen Brennstoffen betrieben werden.
Diese Europäische Norm legt Anforderungen an Auslegung, Herstellung, Ausführung, Sicherheit und Leistungsfähigkeit (Wirkungsgrad und Emission) von Feuerstätten für feste Brennstoffe fest (im Folgenden als "Feuerstätte(n)" bezeichnet) und stellt deren Anleitungen bereit. Darüber hinaus enthält diese Norm auch Festlegungen für die Konformitätsbewertung, d. h. Typprüfung (ITT) und werkseigene Produktionskontrolle (WPK) sowie die Kennzeichnung dieser Feuerstätten.
Diese Europäische Norm behandelt auch Verfahren zur Bestimmung der Emissionen von CO, NOx, OGC und Staub (PM/PME - siehe Anhang F), allerdings sind in dieser Europäischen Norm keine Grenzwerte für diese Emissionen festgelegt.
Feuerstätten, denen Verbrennungsluft über eine nicht luftdichte Verbrennungsluftleitung von außen zugeführt wird, werden nicht als raumluftunabhängig betrachtet. Diese Europäische Norm gilt nicht für Feuerstätten, deren wasserführende Bauteile mit Feuer oder Abgasen in Berührung kommen, es sei denn sie bestehen aus Stahl oder Gusseisen.
Diese Europäische Norm gilt nicht für Feuerstätten mit wasserführenden Bauteilen, die für Wassersysteme mit folgenden Eigenschaften vorgesehen sind:
- Wassertemperaturen über 110 °C und/oder Betriebsdruck von mehr als 3 bar;
- direkter Kontakt mit Brauchwarmwasser.
Diese Europäische Norm gilt nicht für Feuerstätten für den gemeinsamen Betrieb mit Lüftungsanlagen, die einen Druck unter -15 Pa im Aufstellraum der Feuerstätte gegenüber der äußeren Umgebung, erzeugen.
Diese Europäische Norm gilt nicht für Feuerstätten, die zum Tragen der Last eines Schornsteins ausgelegt sind.
Equipement de chauffage domestique - Partie 1 : Exigences et méthodes d'essai générales
La présente Norme européenne s’applique aux appareils de chauffage domestiques à combustible solide.
La présente Norme européenne spécifie les exigences relatives à la conception, à la fabrication, à la construction, à la sécurité et aux performances (rendement et émissions) des appareils à combustible solide (ci-après dénommés « appareils ») et fournit des instructions les concernant. En outre, elle donne des dispositions pour l’évaluation de la conformité, c’est-à-dire les essais de type initiaux (ITT), le contrôle de la production en usine (CPU) et le marquage de ces appareils.
La présente Norme européenne couvre également les méthodes d’essai d’émission de CO, NOx, COV et particules fines (PM/PME, voir l’Annexe F) ; toutefois, les valeurs limites pour ces émissions ne sont pas indiquées.
Les appareils recevant leur air de combustion au moyen d’un système de gaines depuis l’extérieur de l’enveloppe extérieure, qui n’est pas étanche à l’air, ne sont pas considérés comme étanches. La présente Norme européenne ne s’applique pas aux appareils dont des parties du bouilleur en contact avec la combustion ou les fumées sont construites dans des matériaux autres que l’acier ou la fonte.
La présente Norme européenne ne s’applique pas aux appareils avec un bouilleur prévus pour les circuits d’eau
- dont les températures d’eau sont supérieures à 110 °C et/ou la pression de service est supérieure à 3 bar ;
- en contact direct avec l’eau chaude sanitaire.
La présente Norme européenne ne s’applique pas aux appareils conçus pour fonctionner avec des systèmes de ventilation prévus pour fonctionner avec une pression inférieure à 15 Pa par rapport à l’atmosphère extérieure, lorsqu’elle est mesurée dans la pièce où l’appareil est installé.
La présente Norme européenne ne s’applique pas aux appareils prévus pour porter la charge d’un conduit de fumée.
Stanovanjske grelne naprave na trdna goriva - 1. del: Splošne zahteve in preskusne metode
Ta evropski standard se uporablja za stanovanjske grelne naprave na trdna goriva.
Ta evropski standard se ne uporablja za naprave z grelnimi deli, ki prihajajo v stik s požarnimi ali dimnimi plini, razen z jeklom ali s surovim železom.
Ta evropski standard vključuje tudi naprave, ki so zasnovane za delovanje v nepredušno zaprtih prostorih in so namenjene namestitvi z dimnikom, ki se ne uporablja za nobeno drugo napravo.
OPOMBA: Naprave, ki dobivajo zrak za zgorevanje od zunaj prek sistema cevi, ki prepušča zrak, se ne štejejo kot naprave v nepredušno zaprtem prostoru.
Ta evropski standard ne zajema naprav, ki jih je treba upravljati s prezračevalnimi sistemi s tlakom, nižjim od 15 Pa v prostoru namestitve naprave glede na zunanje okolje.
Ta evropski standard določa zahteve v zvezi z zasnovo, izdelavo, sestavo, varnostjo in zmogljivostjo (učinkovitostjo in emisijami) grelnikov prostorov na trdno gorivo (v nadaljevanju »naprave«) ter podaja navodila zanje. Poleg tega podaja določbe za vrednotenje skladnosti, tj. začetni tipski preskus (ITT), ter kontrolo proizvodnje v obratu (FPC) in označevanje teh naprav.
Ta evropski standard zajema tudi preskusne metode za emisije CO, NOx, OGC/skupnih ogljikovodikov in delcev, pri čemer ne vsebuje mejnih vrednosti za takšne emisije.
General Information
Relations
Frequently Asked Questions
SIST EN 16510-1:2018 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Residential solid fuel burning appliances - Part 1: General requirements and test methods". This standard covers: This European Standard is applicable to residential solid fuel burning appliances. This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as appliance(s)) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances. This European Standard also covers CO, NOx, OGC and particulate matter (PM / PME - see Annex F) emission test methods, however this European Standard does not contain any values for the limit on these emissions. Appliances receiving combustion air through ductwork from outside the external envelope, which is not air tight, are not considered roomsealed.This European Standard is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron. This European Standard is not applicable to appliances with a boiler intended for water systems having - water temperatures above 110 °C and/or an operating pressure of more than 3 bar; - direct contact with sanitary hot water. This European Standard does not cover appliances to be operated with ventilating systems which are intended to operate with pressure below - 15 Pa in the room of installation of the appliance in relation to the outside atmosphere. This European Standard does not cover appliances intended to carry the load of a chimney.
This European Standard is applicable to residential solid fuel burning appliances. This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel (hereafter referred to as appliance(s)) and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances. This European Standard also covers CO, NOx, OGC and particulate matter (PM / PME - see Annex F) emission test methods, however this European Standard does not contain any values for the limit on these emissions. Appliances receiving combustion air through ductwork from outside the external envelope, which is not air tight, are not considered roomsealed.This European Standard is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron. This European Standard is not applicable to appliances with a boiler intended for water systems having - water temperatures above 110 °C and/or an operating pressure of more than 3 bar; - direct contact with sanitary hot water. This European Standard does not cover appliances to be operated with ventilating systems which are intended to operate with pressure below - 15 Pa in the room of installation of the appliance in relation to the outside atmosphere. This European Standard does not cover appliances intended to carry the load of a chimney.
SIST EN 16510-1:2018 is classified under the following ICS (International Classification for Standards) categories: 97.100.30 - Solid fuel heaters. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 16510-1:2018 has the following relationships with other standards: It is inter standard links to SIST EN 13240:2003/A2:2005, SIST EN 12809:2003/A1:2005/AC:2008, SIST EN 12809:2003/AC:2006, SIST EN 13240:2003/A2:2005/AC:2008, SIST EN 13229:2003/A2:2005/AC:2008, SIST EN 12809:2003, SIST EN 12815:2003/A1:2005/AC:2008, SIST EN 13229:2003/A2:2005, SIST EN 13229:2003, SIST EN 12815:2003/AC:2006, SIST EN 12815:2003/A1:2005, SIST EN 13229:2003/A1:2004, SIST EN 12815:2003, SIST EN 13240:2003, SIST EN 12809:2003/A1:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 16510-1:2018 is associated with the following European legislation: EU Directives/Regulations: 2015/1185, 2015/1186, 2015/1188, 89/106/EEC; Standardization Mandates: M/129. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 16510-1:2018 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stanovanjske grelne naprave na trdna goriva - 1. del: Splošne zahteve in preskusne metodeHäusliche Heizgeräte für feste Brennstoffe - Teil 1: Allgemeine Anforderungen und PrüfverfahrenEquipement de chauffage domestique - Partie 1 : Exigences et méthodes d'essai généralesResidential solid fuel burning appliances - Part 1: General requirements and test methods97.100.30Grelniki na trdo gorivoSolid fuel heatersICS:Ta slovenski standard je istoveten z:EN 16510-1:2018SIST EN 16510-1:2018en,fr,de01-september-2018SIST EN 16510-1:2018SLOVENSKI
STANDARDSIST EN 13229:2003SIST EN 13240:2003SIST EN 12809:2003SIST EN 12815:20031DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16510-1
July
t r s z ICS
r sä r v rä { sâ
{ sä s v rä s râ
{ yä r v rä t râ
{ yä s r rä u r Supersedes EN
s t z r {ã t r r sá EN
s t z s wã t r r sá EN
s u t t {ã t r r sá EN
s u t v rã t r r sEnglish Version
Residential solid fuel burning appliances æ Part
sã General requirements and test methods Appareils de chauffage domestiques à combustion solide æ Partie
sã Exigences générales et méthodes d 5essai
Häusliche Feuerstätten für feste Brennstoffe æ Teil
sã Allgemeine Anforderungen und Prüfverfahren This European Standard was approved by CEN on
t v March
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x w s ræ sã t r s z ESIST EN 16510-1:2018
Test methods . 59 A.1 Test environment . 59 A.1.1 Ambient room temperature . 59 A.1.2 Cross-draught . 59 A.1.3 External sources . 59 A.2 Test assembly . 59 A.2.1 General. 59 A.2.2 Trihedron . 60 A.2.3 Measurement section . 61 SIST EN 16510-1:2018
Test fuels and recommended fuels . 102 B.1 General . 102 B.2 Test fuel . 102 B.2.1 Selection of test fuel . 102 B.2.2 Storage, preparation and analysis . 102 B.3 Tests for recommended fuels . 102 B.3.1 Basis of testing . 102 B.3.2 Test methods and criteria . 103 Annex C (informative)
Arrangement for measuring the leakage rate . 109 Annex D (normative)
Measuring procedure for nitrogen oxides (NOx) . 110 D.1 General procedure . 110 D.2 Measuring principle of analysers . 110 D.2.1 General description . 110 D.2.2 Chemiluminescense method . 111 D.2.3 Non-dispersive infrared (NDIR) method . 112 D.2.4 Other methods . 113 SIST EN 16510-1:2018
Measuring procedure for organic gaseous carbon (OGC) . 117 E.1 General procedure . 117 E.2 Description of measuring equipment . 117 E.2.1 General. 117 E.2.2 Sampling probe and filter . 117 E.2.3 Sampling line . 118 E.2.4 Sample pump . 118 E.2.5 Secondary filter . 118 E.2.6 Analyser (FID) . 118 E.2.7 FID fuel . 118 E.2.8 FID combustion air . 118 E.3 Setting of measurement system . 118 E.3.1 General. 118 E.3.2 Preliminary zero and span check and adjustments . 119 E.4 Calculation of OGC. 120 E.4.1 General. 120 E.4.2 Calculation assumptions . 120 E.4.3 Calculation of organic gaseous compounds . 120 Annex F (normative)
Measuring procedure for particulate matter (PM) . 122 F.1 General principle . 122 F.2 Heated filter . 122 F.2.1 General. 122 F.2.2 Test set-up . 122 F.2.3 Test procedure . 124 SIST EN 16510-1:2018
Guideline for the characteristics to be taken into account in order to decide on families of appliances . 139 G.1 Principles . 139 G.2 Example for the determination of the appliances to be tested . 139 G.3 Principles for determination of efficiency, carbon monoxide emission and safety distances to combustible materials in initial type tests of a family of appliances . 140 Annex H (informative)
Spread of measuring results as a basis for
market surveillance measurements . 145 Annex I (informative)
Standing Air Loss . 146 I.1 General . 146 I.2 Requirements . 146 I.3 Test Method . 146 I.3.1 Type B appliance . 146 I.3.2 Type BE appliance . 146 Annex J (informative)
A–deviations . 149 Bibliography . 150
1) ISO 331:1983 is withdrawn. SIST EN 16510-1:2018
...
기사 제목: SIST EN 16510-1:2018 - 주택용 고체 연소 장치 - 제1부: 일반 요건 및 시험 방법 기사 내용: 이 유럽 표준은 주택용 고체 연소 장치에 적용됩니다. 이 유럽 표준은 강철이나 주철 외에도 불 또는 플루 가스와 접촉하는 보일러 부품이 있는 장치에는 적용되지 않습니다. 이 유럽 표준에는 또한 실내 밀폐 조건에서 작동하도록 설계된 장치 및 독립적으로 사용되는 굴뚝에 설치되는 장치도 포함됩니다. 주의: 공기밀성이 보장되지 않은 파이프 시스템을 통해 외부에서 공기를 공급받는 장치는 실내 밀폐로 간주되지 않습니다. 이 유럽 표준은 설치 장소와 외부 대기와의 압력이 -15 Pa 이하인 환기 시스템을 사용하는 장치는 다루지 않습니다. 이 유럽 표준은 고체 연료로 작동되는 실내 난방기(이하 "장치")의 설계, 제조, 건설, 안전 및 성능(효율 및 배출)에 관련된 요건을 명시하며, 이들에 대한 지침을 제공합니다. 또한, 초기 유형 시험(ITM) 및 공장 생산 관리(FPC) 및 이러한 장치의 마킹에 대한 규정도 포함됩니다. 이 유럽 표준은 CO, NOx, OGC/총 탄화수소 및 입자 물질 배출 시험 방법에 대해서도 다루지만, 이러한 배출의 한계 값은 포함되어 있지 않습니다.
記事のタイトル：SIST EN 16510-1:2018 - 住宅用固形燃料燃焼機器 - 第1部：一般要件と試験方法 記事の内容：この欧州規格は、住宅用の固形燃料燃焼機器に適用されます。 この欧州規格は、鋼鉄または鋳鉄以外の材料でできたボイラー部品を持つ機器には適用されません。 この欧州規格には、密閉状態で作動するように設計され、他の機器には使用されない専用の煙突に設置される機器も含まれます。 注意：気密ではないパイプシステムを通じて外部から燃焼空気を受け取る機器は、密閉された室内とはみなされません。 この欧州規格は、室内の設置場所で外気に比べて-15パスカル以下の圧力を持つ換気システムで動作する機器は対象外です。 この欧州規格は、固形燃料によって作動する「ルームヒーター」（以下「機器」とする）の設計、製造、構築、安全性、性能（効率および排出物）に関する要件を規定し、それに対する指示も提供します。さらに、初期型試験（ITT）および工場生産管理（FPC）による適合性の評価と、これらの機器のマーキングに対する規定も含まれます。 この欧州規格は、CO、NOx、OGC/総炭化水素および粒子状物質の排出試験方法も扱っていますが、これらの排出物の限界値は含まれていません。
The article discusses the applicability of the European Standard EN 16510-1:2018 to residential solid fuel burning appliances. It states that the standard does not apply to appliances with boiler parts made of materials other than steel or cast iron. It includes appliances designed to operate under sealed conditions with a chimney dedicated to that appliance only. Appliances that receive combustion air from outside through a non-airtight pipe system are not considered roomsealed. The standard does not cover appliances that operate with ventilating systems with pressure below -15 Pa compared to the outside atmosphere in the room where the appliance is installed. The standard specifies requirements for the design, manufacture, construction, safety, and performance of roomheaters fired by solid fuel. It also provides provisions for evaluating conformity through initial type testing and factory production control, as well as marking requirements. Additionally, the standard includes test methods for CO, NOx, OGC/total hydrocarbons, and particulate matter emissions, but it does not set limit values for these emissions.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...