SIST EN 13240:2003
(Main)Room heaters fired by solid fuel - Requirements and test methods
Room heaters fired by solid fuel - Requirements and test methods
This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) instructions and marking together with associated test methods and test fuels for type testing residential roomheaters fired by solid fuel.
This Standard is applicable to non-mechanically fired appliances which are listed under categories 1a and 2a of Table 1. These appliances provide heat into the space where they are installed. Additionally, where fitted with a boiler, they also provide domestic hot water and/or central heating. These appliances may burn either solid mineral fuels, peat briquettes, natural or manufactured wood logs or be multi-fuel in accordance with the appliance manufacturer's instructions.
This standard is not applicable to appliances with fan assisted combustion air.
Raumheizer für feste Brennstoffe - Anforderungen und Prüfung
Diese Europäische Norm beschreibt Anforderungen an Auslegung, Herstellung, Ausführung, Sicherheit und Leistungsvermögen (Wirkungsgrad und Emission), Anleitung und Kennzeichnung zusammen mit zugehörigen Prüfverfahren und Prüfbrennstoffen für die Typprüfung von Raumheizern für feste Brennstoffe.
Diese Norm gilt für nicht mechanisch beschickte Feuerstätten, die in Tabelle 1, Kategorie 1a) und 2a), aufgeführt sind. Diese Feuerstätten beheizen den Aufstellungsraum. Sofern sie mit wasserführenden Bauteilen ausgestattet sind, beheizen sie auch Heizwasser und/oder Brauchwasser. Diese Feuerstätten können entsprechend der Bedienungsanleitung des Herstellers entweder feste mineralische Brennstoffe, Torfbriketts, Holzscheite, Holzbriketts oder mehrere dieser Brennstoffe verfeuern. Diese Norm gilt nicht für Feuerstätten mit Verbrennungsluftgebläse.ANMERKUNG Ohne funktionale Änderung bedeutet eine Veränderung der Verkleidung der Feuerstätte, die die Wärmeabgabe verändert, die Verbrennung jedoch nicht beeinflusst.
Poeles a combustible solide - Exigences et méthodes d'essai
La présente Norme européenne définit les exigences relatives a la conception, a la fabrication, a l'assemblage, a la sécurité, aux performances (rendement et émissions), aux instructions et au marquage ainsi que les méthodes d'essais et combustibles d'essais correspondants pour les essais des poeles domestiques a combustible solide.
La présente norme est applicable aux appareils dépourvus d'alimentation mécanique et qui sont repris sous les catégories 1a et 2a du Tableau 1. Ces appareils produisent de la chaleur dans l'espace ou ils sont installés. De plus, lorsqu'ils sont équipés d'un bouilleur, ils produisent également de l'eau chaude a usage domestique et/ou du chauffage central. Ces appareils peuvent utiliser soit des combustibles minéraux solides, des briquettes de tourbe, des buches de bois naturel ou reconstitué, soit plusieurs combustibles conformément aux instructions du fabricant.
Cette norme ne s'applique pas aux appareils équipés d'un ventilateur pour l'alimentation en air de combustion.
Tableau 1 - Classification des appareils
a) b) c)
Appareils indépendants ou encastrés sans modification fonctionnelle Appareils indépendants ou encastrés avec modification fonctionnelle Appareils encastrés pour niche et enceinte
1 appareils a portes fermées EN 13240 EN 13229 EN 13229
2 appareils a portes fermées ou ouvertes EN 13240 EN 13229 EN 13229
3 foyers ouverts sans porte EN 13229 EN 13229 EN 13229
NOTE L'expression "sans modification fonctionnelle" signifie une modification de l'habillage d'un appareil, qui ne change que la transmission de la chaleur et n'a aucun effet sur la combustion.
2 Références normatives
Grelniki prostorov na trdna goriva - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Room heaters fired by solid fuel - Requirements and test methodsGrelniki prostorov na trdna goriva - Zahteve in preskusne metodePoeles a combustible solide - Exigences et méthodes d'essaiRaumheizer für feste Brennstoffe - Anforderungen und Prüfung97.100.30Grelniki na trdo gorivoSolid fuel heatersICS:SIST EN 13240:2003enTa slovenski standard je istoveten z:EN 13240:200101-januar-2003SIST EN 13240:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13240June 2001ICS 97.100.30English versionRoomheaters fired by solid fuel - Requirements and testmethodsPoêles à combustible solide - Exigences et méthodesd'essaiRaumheizer für feste Brennstoffe - Anforderungen undPrüfungThis European Standard was approved by CEN on 7 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13240:2001 E
Page 2EN 13240:2001Contents pageForeword31 Scope42 Normative references43 Terms and definitions64 Materials, design and construction125 Safety requirements196 Performance requirements207 Appliance instructions238 Marking25Annex A (normative) Test methods26Annex B (normative)
Test fuels and recommended fuels59Annex
C (informative) A-deviations64TablesTable 1 - Categorisation of appliances4Table 2 - Steel - Nominal minimum wall thicknesses13Table 3 - Steel material types14Table 4 - Minimum mechanical requirements for cast irons15Table 5 - Cast iron - Minimum wall thicknesses15Table 6 - Minimum thread size designation of flow and return tappings16Table 7 - Minimum depth of tapping or length of thread16Table 8 - Carbon monoxide emission classes21Table 9 - Efficiency at nominal heat output21Table 10 - Minimum refuelling intervals23Table A.1 - Uncertainty of measurement29Table A.2 - Minimum duration, and number of test periods32Table A.3 - Notations and units used in calculations42Table B.1 - Test fuel specifications62Table B.2 - Typical commercial fuel specifications63FiguresFigure 1 - Flue draught values22Figure A.1 - Example of installation of an appliance with vertical flue outlet in the test assembly47Figure A.2 - Example of installation of an appliance with horizontal flue outlet in the test assembly48Figure A.3 - View of trihedron showing general arrangement of walls and test hearth49Figure A.4 - Detail of filler pieces for trihedron rear wall50Figure A.5 - Cross section showing trihedron construction51Figure A.6 - Plan view of trihedron hearth and walls showing position of measurement points52Figure A.7 - Detail of thermocouples in trihedron wall53Figure A.8 - Construction and general arrangement of measurement section54Figure A.9 - Details and dimensions of measurement section for vertical flue outlet55Figure A.10 - Details and dimensions of measurement section for horizontal flue outlet56Figure A.11 - Example of test installation for appliances with water circuit57Figure A.12 - Dimensions of
measurement section for natural draught safety test58Figure B.1 - Flow chart showing selection process for tests on recommended fuels60
Page 3EN 13240:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 295 "Residential solid fuelburning appliances", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2001, and conflicting national standards shall be withdrawnat the latest by December 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.
P
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.