SIST EN 14258:2005
(Main)Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature
This standard describes methods to determine the ability of structural (thermoplastics, thermosetting) adhesives to resist to heat (temperature, continuously or temporarily).
Strukturklebstoffe - Mechanisches Verhalten von Klebverbindungen bei kurzzeitiger oder langzeitiger Beanspruchung bei festgelegter Temperatur
Dieses Dokument legt Leitlinien zur Beurteilung des mechanischen Verhaltens von Strukturklebverbindungen in
Abhängigkeit von einer kurzzeitigen oder langzeitigen Beanspruchung bei festgelegten Temperaturbedingungen
(Hitzebeständigkeit) fest. Dies wird mit der Messung der Schereigenschaften von Strukturklebverbindungen bestimmt.
Adhésifs structuraux - Comportement mécanique des assemblages collés soumis a une exposition a court et long termes a des conditions de température spécifiées
Le présent document spécifie des lignes directrices pour l�évaluation du comportement mécanique des
assemblages collés par des adhésifs structuraux soumis à des expositions à court et long termes dans des
conditions de température spécifiées (résistance à la chaleur). Cette évaluation se fonde sur la détermination
des caractéristiques en cisaillement des assemblages collés par adhésif.
Konstrukcijska lepila - Mehansko obnašanje lepljenih spojev ob kratkotrajni ali dolgotrajni izpostavitvi temperaturni obremenitvi
General Information
- Status
- Published
- Publication Date
- 28-Feb-2005
- Technical Committee
- IPMA - Polimer materials and products
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Mar-2005
- Due Date
- 01-Mar-2005
- Completion Date
- 01-Mar-2005
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
SIST EN 1465:2009 - Adhesives - Determination of tensile lap-shear strength of bonded assemblies - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN 14258:2005 is a European standard specifying test methods for assessing the mechanical behaviour of structural adhesives under thermal stress. The focus is on the performance of bonded joints when subjected to both short-term and long-term exposure to specified temperature conditions. This standard supports quality assurance and design validation in industries where adhesives play a critical structural role under varying and sometimes extreme thermal environments.
Key stakeholders for this standard include manufacturers and users of adhesive systems, quality assurance professionals, and those involved in materials testing for construction, automotive, aerospace, electronics, and other high-performance sectors.
Key Topics
- Thermal Resistance of Adhesives: Evaluates the ability of both thermoplastic and thermosetting structural adhesives to maintain joint integrity and mechanical properties under continuous or temporary heat exposure.
- Short-term vs. Long-term Exposure: Differentiates between immediate responses to elevated temperatures and the effects of prolonged heat exposure, ensuring a comprehensive understanding of adhesive durability.
- Standardized Test Methods: Prescribes procedures for preparing and conditioning specimens, selecting appropriate test temperatures, and performing shear and tensile tests to generate reliable, repeatable data.
- Reporting Requirements: Details mandatory reporting of test temperatures, exposure durations, and relevant specimen history to aid in the comparison and interpretation of results.
Applications
SIST EN 14258:2005 is applicable wherever structural bonding must withstand temperature fluctuations or sustained heat. Common applications include:
- Construction and Building: Validation of adhesives used in façade panels, curtain walls, and load-bearing assemblies exposed to outdoor or process heat.
- Automotive and Transportation: Assessment of body-in-white and component adhesives for thermal cycles experienced in operation or painting processes.
- Aerospace and Electronics: Qualification of adhesives for airframes, circuit assemblies, and components within environments subject to thermal variation or continuous heat.
- Industrial Manufacturing: Selection and verification of adhesives for machinery parts, tooling, or assemblies exposed to systematic heating or cooling.
By applying the standardized procedures of EN 14258, organizations can ensure adhesives meet required performance criteria for safety, reliability, and longevity under specified conditions.
Related Standards
The following standards are referenced within SIST EN 14258:2005 and serve as its foundation or support its application:
- EN 923:1998: Adhesives - Terms and definitions
- EN 1465: Adhesives - Determination of tensile lap-shear strength for rigid-to-rigid bonded assemblies
- EN 14869-2: Structural adhesives - Shear behaviour testing - Thick adherends shear test
- EN ISO 9142: Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
- ISO 10123: Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
For comprehensive adhesive testing, practitioners should be familiar with these documents to ensure consistent sample preparation, testing, and results interpretation.
SIST EN 14258:2005 helps organizations in selecting, testing, and qualifying structural adhesives where thermal exposure is a critical factor, promoting product quality, safety, and compliance with international practice in mechanical testing of bonded joints.
Get Certified
Connect with accredited certification bodies for this standard
DIN CERTCO
DIN Group product certification.
Smithers Quality Assessments
US management systems and product certification.
Sponsored listings
Frequently Asked Questions
SIST EN 14258:2005 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature". This standard covers: This standard describes methods to determine the ability of structural (thermoplastics, thermosetting) adhesives to resist to heat (temperature, continuously or temporarily).
This standard describes methods to determine the ability of structural (thermoplastics, thermosetting) adhesives to resist to heat (temperature, continuously or temporarily).
SIST EN 14258:2005 is classified under the following ICS (International Classification for Standards) categories: 83.180 - Adhesives. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14258:2005 has the following relationships with other standards: It is inter standard links to SIST EN 923:1999, SIST EN ISO 9142:2004, SIST EN 14869-2:2011, SIST EN 29592-1:1998, SIST EN 1465:2009, SIST EN ISO 15750-2:2008, SIST EN ISO 15750-1:2008, SIST EN ISO 9455-13:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14258:2005 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/127. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 14258:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Konstrukcijska lepila - Mehansko obnašanje lepljenih spojev ob kratkotrajni ali dolgotrajni izpostavitvi temperaturni obremenitviStrukturklebstoffe - Mechanisches Verhalten von Klebverbindungen bei kurzzeitiger oder langzeitiger Beanspruchung bei festgelegter TemperaturAdhésifs structuraux - Comportement mécanique des assemblages collés soumis a une exposition a court et long termes a des conditions de température spécifiéesStructural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 14258:2004SIST EN 14258:2005en01-marec-2005SIST EN 14258:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14258November 2004ICS 83.180English versionStructural adhesives - Mechanical behaviour of bonded jointssubjected to short and long terms exposure at specifiedconditions of temperatureAdhésifs structuraux - Comportement mécanique desassemblages collés soumis à une exposition à court et longtermes à des conditions de température spécifiéesStrukturklebstoffe - Mechanisches Verhalten vonKlebverbindungen bei kurzzeitiger oder langzeitigerBeanspruchung bei festgelegter TemperaturThis European Standard was approved by CEN on 2 September 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14258:2004: ESIST EN 14258:2005
...