iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61429:2001/A11:2001

(Amendment)

Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC

Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC

2021: CLC legacy converted by DCLab NISOSTS

Kennzeichnung von Akkumulatoren und Batterien mit dem internationalen Recycling-Bildzeichen ISO 7000-1135 und Hinweis auf Richtlinien 93/86/EWG und 91/157/EWG

Marquage des accumulateurs avec le symbole international de recyclage ISO 7000-1135 et les indications relatives aux directives 93/86/CEE et 91/157/CEE

Amendment to title, scope and subclause 3.2 of EN

General Information

Status
Published
Publication Date
31-Jan-2001
ICS
01.080.20 - Graphical symbols for use on specific equipment
29.220.20 - Acid secondary cells and batteries
29.220.30 - Alkaline secondary cells and batteries
Technical Committee
ISCB - Secondary cells and batteries
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2001
Due Date
01-Feb-2001
Completion Date
01-Feb-2001
Ref Project
EN 61429:1996/A11:1998 - Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC

Relations

Amends
SIST EN 61429:2001 - Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC
Effective Date
01-Feb-2001
Amends
SIST EN 61429:2001 - Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC
Effective Date
28-Jan-2023

Buy Standard

EN 61429:2001/A11:2001EN 61429:2001/A11:2001
PreviousNext
Amendment
EN 61429:2001/A11:2001
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61429:2001/A11:2001
01-februar-2001
Amendment to title, scope and subclause 3.2 of EN
Marking of secondary cells and batteries with the international recycling symbol ISO
7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC
Kennzeichnung von Akkumulatoren und Batterien mit dem internationalen Recycling-
Bildzeichen ISO 7000-1135 und Hinweis auf Richtlinien 93/86/EWG und 91/157/EWG
Marquage des accumulateurs avec le symbole international de recyclage ISO 7000-1135
et les indications relatives aux directives 93/86/CEE et 91/157/CEE
Ta slovenski standard je istoveten z: EN 61429:1996/A11:1998
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
29.220.20 .LVOLQVNLVHNXQGDUQLþOHQLLQ Acid secondary cells and
EDWHULMH batteries
29.220.30 $ONDOQLVHNXQGDUQLþOHQL
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61429:2001(Main)
Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC
EN 61429:1996

This International Standard defines the conditions of utilization of the recycling symbol of the International Organization for Standardization (ISO) associated with the chemical symbols indicating the electrochemical system of the battery. This standard applies to lead-acid batteries (Pb) and nicke-cadmium batteries (Ni-Cd).

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61429:2001(Main)
Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC
EN 61429:1996

This International Standard defines the conditions of utilization of the recycling symbol of the International Organization for Standardization (ISO) associated with the chemical symbols indicating the electrochemical system of the battery. This standard applies to lead-acid batteries (Pb) and nicke-cadmium batteries (Ni-Cd).

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 16486-7:2023(Main)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 7: Assessment of conformity (ISO/TS 16486-7:2023)
CEN ISO/TS 16486-7:2023

This document gives guidance and requirements for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of the ISO 16486 series which are intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1    A basic test matrix in Annex B provides an overview of the testing scheme.
It is recommended for the manufacturer to have a management system such as ISO 9001[4] or equivalent.
NOTE 2    If certification is involved, certification bodies and inspection bodies operating according to ISO/IEC 17065 and ISO/IEC 17020 are considered to be competent.
In conjunction with the other parts of the ISO 16486 series (see Clause 2), this document is applicable to unplasticized polyamide (PA-U) piping systems intended to be buried and used for the supply of gaseous fuels. It is applicable to PA-U pipes, fittings and valves, as well as to their joints and to joints with components of other materials intended to be used under the following conditions:
a)    a maximum operating pressure (MOP) up to and including 18 bar[1] (the MOP is limited to 16 bar for CEN member countries, where ISO 16486-6 is replaced by CEN/TS 12007-6[1]);
b)    an operating temperature of 20 °C as the reference temperature.
NOTE 3    For operating temperatures different to 20 °C, derating coefficients can be used (see ISO 16486-6). CEN member countries use CEN/TS 12007-6[1] and ISO/TS 16486-7 (this document) as a basis, but they can also request additional requirements. For non-CEN member countries, information for dealing with special cases for PA-U can be found in ISO/TS 16486-7 (this document) and PPI TR-3.[7]
For mechanical fittings conforming to ISO 17885, guidance for assessment of conformity is not given in this document. When requested, a quality plan based on the tests mentioned can be set up in agreement between user and manufacturer.
The ISO 16486 series covers a range of maximum operating pressures and gives requirements concerning colours.
NOTE 4    It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 406-2 V3.1.1:2023(Main)
Digital Enhanced Cordless Telecommunications (DECT) - Harmonised Standard for access to radio spectrum - Part 2: DECT-2020 NR
ETSI EN 301 406-2 V3.1.1 (2023-08)

DEN/DECT-00359-2

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    76 pages
    English language
    sale 15% off
  • Standard
    76 pages
    English language
    sale 15% off
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60061-3:2000/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969/AMD59:2023)
EN 60061-3:1993/A59:2023
  • Amendment
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16186-5:2021+A1:2023(Main + Amendment)
Railway applications - Driver's cabs - Part 5: External visibility for tram vehicles
EN 16186-5:2021+A1:2023

This document specifies the external front and rear visibility conditions from cabs of tram
vehicles and the associated assessment method.
This document applies to vehicles operating on tram networks.
This document does not apply to driver's auxiliary desks.
This standard is not intended to be applied for tram train.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60061-2:1999/A59:2023(Main)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969/AMD59:2023)
EN 60061-2:1993/A59:2023
  • Amendment
    19 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023/A1:2023(Amendment)
Amendment 1: International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017/AMD1:2021
  • Standard
    3 pages
    English and French language
    sale 15% off
  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60721-3-4:2019/AC:2023(Corrigendum)
Classification of environmental conditions - Part 3-4: Classification of groups of environmental parameters and their severities - Stationary use at non-weatherprotected locations (IEC 60721-3-4:2019/COR1:2023)
EN IEC 60721-3-4:2019/AC:2023-08
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-811:2023(Main)
International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 60050-811:2017

IEC 60050-811:2017 gives the general terminology relating to electric traction used in electrical equipment and systems for railways, as well as general terms pertaining to specific applications and associated technologies. This new edition reviews and complements the previous one. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    626 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    612 pages
    English and French language
    sale 15% off