iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 3767-1:1996

(Main)

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 1: Common symbols (ISO 3767-1:1991)

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 1: Common symbols (ISO 3767-1:1991)

This part of ISO 3767 establishes the common symbols for use on operator controls and other displays on tractors and machinery for agriculture and forestry, and powered lawn and garden equipment as defined in ISO 3339-0 and ISO 5395. The symbols given apply to controls and displays common to tractors and machinery for agriculture and forestry, and powered lawn and garden equipment, as well as to other types of self-propelled work machines designed to operate off public roads, such as earth-moving machines, powered industrial trucks and mobile cranes.

Traktoren, Land- und Forstmaschinen, motorgetriebene Rasen- und Gartengeräte - Bildzeichen für Bedienelemente und sonstige Anzeigeeinrichtungen - Teil 1: Allgemeine Bildzeichen (ISO 3767-1:1991)

Dieser Teil der ISO 3767 legt einheitliche Bildzeichen für Bedienelemente und sonstige Anzeigeeinrichtungen fest, die an Traktoren und Maschinen für die Land- und Forstwirtschaft sowie für motorgetriebene Rasen- und Gartengeräte verwendet werden, wie in ISO 3339-0 und ISO 5395 definiert. Die angegebenen Bildzeichen gelten für Bedienelemente und Anzeigeeinrichtungen, die gemeinsam sowohl an Traktoren und Maschinen für die Land- und Forstwirtschaft sowie für motorgetriebene Rasen- und Gartengeräte als auch für andere Arbeitsmaschinen mit Eigenantrieb verwendet werden.

Tracteurs, matériels agricoles et forestiers, matériel a moteur pour jardins et pelouses - Symboles pour les commandes de l'opérateur et autres indications - Partie 1: Symboles communs (ISO 3767-1:1991)

La présente partie de l'ISO 3767 établit les symboles communs à utiliser sur les commandes de l'opérateur et autres indicateurs sur les tracteurs, les matériels agricoles et forestiers, et le matériel à moteur pour jardins et pelouses tels que définis dans l'ISO 3339-0 et dans l'ISO 5395. Les symboles donnés s'appliquent aux commandes et aux indicateurs communs aux tracteurs, aux matériels agricoles et forestiers, et au matériel à moteur pour jardins et pelouses, aussi bien qu'aux autres types de machines de travail automotrices conçues pour fonctionner hors des routes publiques.

Traktorji, kmetijski in gozdarski stroji, oprema za nego trate in vrta - Simboli in drugi znaki za krmilne elemente - 1. del: Splošni simboli (ISO 3767-1:1991)

General Information

Status
Withdrawn
Publication Date
31-Oct-1996
Withdrawal Date
30-Apr-2001
ICS
01.080.20 - Graphical symbols for use on specific equipment
65.060.01 - Agricultural machines and equipment in general
Technical Committee
IMKG - Machinery for agriculture and forestry
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-May-2001
Due Date
01-May-2001
Completion Date
01-May-2001
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
Ref Project
EN ISO 3767-1:1995 - Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 1: Common symbols (ISO 3767-1:1991)

Relations

Replaced By
SIST EN ISO 3767-1:2001 - Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 1: Common symbols (ISO 3767-1:1998)
Effective Date
01-May-2001
EN ISO 3767-1:1996EN ISO 3767-1:1996
PreviousNext
Standard
EN ISO 3767-1:1996
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-1996
Traktorji, kmetijski in gozdarski stroji, oprema za nego trate in vrta - Simboli in
drugi znaki za krmilne elemente - 1. del: Splošni simboli (ISO 3767-1:1991)
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -
Symbols for operator controls and other displays - Part 1: Common symbols (ISO 3767-
1:1991)
Traktoren, Land- und Forstmaschinen, motorgetriebene Rasen- und Gartengeräte -
Bildzeichen für Bedienelemente und sonstige Anzeigeeinrichtungen - Teil 1: Allgemeine
Bildzeichen (ISO 3767-1:1991)
Tracteurs, matériels agricoles et forestiers, matériel a moteur pour jardins et pelouses -
Symboles pour les commandes de l'opérateur et autres indications - Partie 1: Symboles
communs (ISO 3767-1:1991)
Ta slovenski standard je istoveten z: EN ISO 3767-1:1995
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
65.060.01 Kmetijski stroji in oprema na Agricultural machines and
splošno equipment in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN ISO 376
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TS CEN/TS ISO 5615:2025(Main)
Health informatics - Accelerating safe, effective and secure remote connected care and mobile health through standards-based interoperability solutions addressing gaps revealed by pandemics (ISO/TS 5615:2025)
CEN ISO/TS 5615:2025

This document reviews the structural changes that have been precipitated by the COVID-19 pandemic in Remote Connected Care and Mobile Health (RCC-MH). The impact of the COVID-19 pandemic on care settings such as home and community care, acute care and outpatient care are reviewed discussing how well these healthcare environments were prepared to address the encountered connectivity challenges from a standards point of view. The current standards landscape is reviewed and gaps are identified leading to recommendations for future standards work.

  • Technical specification
    101 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 13582:2025(Main)
Installation of thermal energy meters - Guidelines for the selection, installation and operation of thermal energy meters
CEN/TR 13582:2025

The EN 1434 series of standards provide technical principles and practical advice in selecting, installing and commissioning of thermal energy meters. However, because a standard cannot cover all areas completely, this document assists users of thermal energy meters.

  • Technical report
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15708-3:2025(Main)
Non-destructive testing - Radiation methods for computed tomography - Part 3: Operation and interpretation (ISO 15708-3:2025)
EN ISO 15708-3:2025

This document provides an overview of the operation of a computed tomography (CT) system. This document specifies steps for interpretation of CT results with the aim of providing the operator with technical information to enable selection of suitable parameters.
This document is applicable to industrial imaging (i.e. non-medical applications) and specifies a consistent set of definitions of CT performance parameters, including how these performance parameters relate to CT system specifications.
This document is applicable to computed axial tomography.
This document does not apply to other types of tomography such as translational tomography and tomosynthesis.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60112:2025(Main)
Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2025)
EN IEC 60112:2025

IEC 60112:2025 specifies the method of test for the determination of the proof and comparative tracking indices of solid insulating materials on pieces taken from parts of equipment and on plaques of material using alternating voltage. This document provides a procedure for the determination of erosion when required. The proof tracking index is used as an acceptance criterion as well as a means for the quality control of materials and fabricated parts. The comparative tracking index is mainly used for the basic characterization and comparison of the properties of materials. This test method evaluates the composition of the material as well as the surface of the material being evaluated. Both the composition and surface condition directly influence the results of the evaluation and are considered when using the results in material selection process. The described test method is designed for a test voltage up to 600 V AC, because higher test voltages and DC voltage will lead to a reduced test severity. Test results are not directly suitable for the evaluation of safe creepage distances when designing electrical apparatus. The results of this method have been used for insulation coordination of equipment. It is important that use of these results also considers the overvoltage levels, creepage distances, and establishes the pollution degree to which the product insulation system will be expected to be subjected. This is in compliance with IEC 60664-1. This basic safety publication focusing on a safety test method is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This sixth edition cancels and replaces the fifth edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- In 7.3, the term "resistivity" has been replaced by "conductivity".
It has the status of a basic safety publication in accordance with IEC Guide 104.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13852-1:2025(Main)
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 13852-1:2025

This document applies to general purpose offshore cranes including their supporting pedestals and structures.
This document is applicable to general purpose offshore cranes, whose structures are made of steel.
This document provides requirements for all significant hazards, hazardous situations and events relevant to general purpose offshore cranes, for lifting of goods and lifting of persons, when used as intended and under the conditions foreseen by the risk assessment (see Clause 4).
This document is applicable to general purpose offshore cranes, which are manufactured after the date of approval by CEN of this document.
This document is not applicable for:
a)   transportation, assembly, disabling, scrapping, installation or erecting of the crane;
b)   any item attached to the hook, such as loads, non-fixed load lifting attachments, lifting accessories, baskets, carriers and containers;
c)   lifting operations in ambient temperatures below - 20 °C;
d)   lifting operations in ambient temperatures above 45 °C;
e)   accidental loads as result of collisions, earthquakes, explosions, etc., which are not covered by exceptional loads defined in Table B.7 ;
f)   floating cranes (covered by EN13852-2), light offshore cranes (covered by FprEN13852-3) and 2D/3D motion compensated cranes;
g)   subsea lifting operations;
h)   lifting operations involving more than one crane;
i)   emergency rescue operations (except training).

  • Standard
    177 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16828:2025(Main)
Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique for detection and sizing of discontinuities (ISO 16828:2025)
EN ISO 16828:2025

This document specifies the general principles for the application of the time-of-flight diffraction (TOFD) technique for both detection and sizing of discontinuities in low-alloyed carbon steel components.
This document also applies to other types of materials, provided the application of the TOFD technique is performed with necessary consideration of geometry, acoustical properties of the materials, and the test sensitivity.
Although this document is applicable, in general terms, for discontinuities in materials and applications covered by ISO 16810, it contains references to the application on welds. This approach has been chosen for reasons of clarity as to the probe positions and directions of scanning.
Unless otherwise specified in the referencing documents, the minimum requirements specified in this document apply.
Unless explicitly stated otherwise, this document is applicable to the following categories of test objects as specified in ISO 16811:
—     category 1, without restrictions;
—     categories 2 and 3, specified restrictions apply (see Clause 10);
—     categories 4 and 5 require special procedures, which are also addressed (see Clause 10).
NOTE            Techniques for the use of TOFD for weld testing are described in ISO 10863 and the related acceptance criteria are given in ISO 15626.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 455-5:2025(Main)
Medical gloves for single use - Part 5: Extractable chemical residues
EN 455-5:2025

This document specifies a test method for the measurement of residual chemicals used in product manufacture, particularly potentially Type IV allergenic substances employed and remaining in medical gloves. It also provides information on the extraction medium, the method of extraction and quantitative assay of residual chemicals.
This document does not provide information on the allergenic potential, biological evaluation, or safety to the user of any product.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16827:2025(Main)
Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2025)
EN ISO 16827:2025

This document specifies the general principles and techniques for the characterization and sizing of previously detected discontinuities in order to ensure their evaluation against applicable acceptance criteria.
This document is applicable, in general terms, to discontinuities in those materials and applications covered by ISO 16810.
Phased array techniques can also be applied but additional steps or verifications can be needed.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15708-4:2025(Main)
Non-destructive testing - Radiation methods for computed tomography - Part 4: Qualification (ISO 15708-4:2025)
EN ISO 15708-4:2025

This document gives guidance on the qualification of the performance of a computed tomography (CT) system with respect to various testing tasks.
This document is applicable only to industrial imaging (i.e. non-medical applications) and provides a consistent set of definitions of CT performance parameters, including the relationship between these performance parameters and CT system specifications.
This document is applicable to industrial computed tomography.
This document does not apply to other techniques of tomography such as translational tomography and tomosynthesis.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60931-2:2025(Main)
Shunt power capacitors of the non-self-healing type for AC systems having a rated voltage up to and including 1000 v - Part 2: Ageing test and destruction test (IEC 60931-2:2025)
EN IEC 60931-2:2025

IEC 60931-2:2025 applies to capacitors according to IEC 60931-1 and gives the requirements for the ageing test and destruction test for these capacitors.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day