65.060.01 - Agricultural machines and equipment in general

This document specifies criteria for construction, establishes performance test methods and defines acceptance criteria for telescopic mechanical screw- and nut-type drawbar jacks and hydraulic drawbar jacks intended to be fitted on the implement tongue of interchangeable towed machinery [here after referred to as "implement(s)"] as original equipment or as replacement jacks. In addition, it specifies minimum markings and information for use to be provided by the jack manufacturer. These jacks a...view more

This document specifies safety requirements, test procedures, and establishes minimum acceptance criteria for the application of telescopic mechanical screw- and nut-type drawbar jacks and hydraulic drawbar jacks intended to be fitted on the implement tongue of interchangeable towed machinery and hereafter referred to as "implement(s)" as original equipment or jacks fitted with a jack attachment mount. This document applies to implement mounted jacks or jacks fitted with a jack attachment mount....view more

This document specifies the standardized access to repair and maintenance information (RMI) systems to provide repair and maintenance information for vehicles used in agriculture and forestry. It provides — general information and basic principles, — use case definitions (functional requirements), and — technical requirements as guidelines for manufacturers intending to establish such an information system. Annex A includes procedures to ensure the conformance of such information systems with th...view more

This document applies to wheeled and track-laying self-propelled agricultural and forestry vehicles. It specifies the definitions, construction and performance requirements and the means for verification of braking systems on vehicles with a maximum design speed not exceeding 60 km/h.
Following items are excluded from the scope of this standard:
•   Coupling force control
•   Endurance braking systems
•   Anti-Lock Braking Systems and EBS
•   Vacuum braking systems
•   Safety related parts of compl...view more

This document applies to wheeled and/or track-laying self-propelled agricultural and forestry vehicles when used on public roads. It specifies the definitions, construction and performance requirements and the means for verification of braking systems on vehicles with a maximum design speed not exceeding 60 km/h.
Following items are excluded from the scope of this document:
-   coupling force control;
-   endurance braking systems;
-   Anti-Lock Braking Systems and EBS;
-   vacuum braking systems;
...view more

This document specifies methods of operation and requirements related to manual (for example, hand-, finger-, foot-operated) controls as well as controls associated with virtual terminals intended for a seated operator. It applies to controls installed on agricultural tractors and self-propelled agricultural machinery. It also gives recommendations for the control actuating forces and torques, direction of motion and location of these manual controls. This document also specifies the minimum inf...view more

This European Standard specifies safety requirements and their verification for the design and construction of power take-off (PTO) drive shafts and their guards linking self-propelled machinery (or tractor) to the first fixed bearing of recipient machinery, by describing methods for the elimination or reduction of risks which need specific requirements. This standard concerns only the PTO drive shafts and those guards which are mechanically linked to the PTO drive shaft by at least two bearings...view more

This document specifies safety requirements and their verification for the design and construction of power take-off (PTO) drive shafts and their guards linking a tractor or self-propelled machinery to the first fixed bearing of recipient machinery. It describes methods for the elimination or reduction of risks which need specific requirements including such risks arising from misuse, reasonably foreseeable by the manufacturer. It is applicable only to those PTO drive shafts and guards mechanica...view more

This document specifies the concept phase of the development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to mobile municipal equipment (such as street-sweeping machines). This document is not applicable to: — aircraft and air-cushion vehicles used in agriculture; — lawn and garden equipment. This document specifies ...view more

This document describes the management of source addresses (SAs) for control functions (CFs) of electronic control units (ECUs), the association of addresses with the functional identification of a device and the detection and reporting of network-related errors. It also specifies procedures for initialization of network-connected ECUs.

ISO 11783 specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements, and information-storage and -display units, whether mounted on, or part of, the tractor or implement. ISO 11783 also provides an open interconnect system for on-board electronic systems used by agriculture and...view more

ISO 11783, as a whole, specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed, or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage, and display units, whether mounted on, or part of, the tractor or implement. This document describes the network's diagnostic system. NOTE The name and contact information...view more

This part of ISO 25119 provides general principles for the production, operation, modification and supporting processes of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry, and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It can also be applied to municipal equipment (e.g. street sweeping machines).
This part of ISO 25119 is not applicable to:
   aircraft and air-cushion vehicles used in agri...view more

This part of ISO 25119 provides general principles for the series development, hardware and software of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It may also be applied to municipal equipment (e.g. street sweeping machines).
This part of ISO 25119 is not applicable to:
   aircraft and air-cushion vehicles used in agriculture,
   lawn and...view more

This part of ISO 25119 sets out general principles for the design and development of safety-related parts of control systems (SRP/CS) on tractors used in agriculture and forestry and on self-propelled ride-on machines and mounted, semi-mounted and trailed machines used in agriculture. It may also be applied to municipal equipment (e.g. street sweeping machines).
This part of ISO 25119 is not applicable to:
•   aircraft and air-cushion vehicles used in agriculture,
•   lawn and garden equipment.
...view more