SIST EN ISO 9692-3:2016

SLOVENSKI STANDARD
01-oktober-2016
1DGRPHãþD
SIST EN ISO 9692-3:2002
SIST EN ISO 9692-3:2002/A1:2004
9DUMHQMHLQVRURGQLSRVWRSNL3ULSRURþLOD]DSULSUDYR]YDUQLKURERYGHO
9DUMHQMHDOXPLQLMDLQDOXPLQLMHYLK]OLWLQSRSRVWRSNLK0,*LQ0$*,62
Welding and allied processes - Recommendations for joint preparation - Part 3: Metal
inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-
3:2016)
Schweißen und verwandte Prozesse - Empfehlungen für Fugenformen - Teil 3: Metall-
Inertgasschweißen und Wolfram-Inertgasschweißen von Aluminium und Aluminium-
Legierungen (ISO 9692-3:2016)
Soudage et techniques connexes - Recommandations pour la préparation des joints -
Partie 3: Soudage MIG et TIG de l'aluminium et de ses alliages (ISO 9692-3:2016)
Ta slovenski standard je istoveten z: EN ISO 9692-3:2016
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 9692-3
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2016
EUROPÄISCHE NORM
ICS 25.160.10 Supersedes EN ISO 9692-3:2001
English Version
Welding and allied processes - Types of joint preparation -
Part 3: Metal inert gas welding and tungsten inert gas
welding of aluminium and its alloys (ISO 9692-3:2016)
Soudage et techniques connexes - Types de Schweißen und verwandte Prozesse - Empfehlungen
préparation de joints - Partie 3: Soudage MIG et TIG de für Fugenformen - Teil 3: Metall-Inertgasschweißen
l'aluminium et de ses alliages (ISO 9692-3:2016) und Wolfram-Inertgasschweißen von Aluminium und
Aluminium-Legierungen (ISO 9692-3:2016)
This European Standard was approved by CEN on 10 July 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9692-3:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 9692-3:2016) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2017, and conflicting national standards shall
be withdrawn at the latest by January 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 9692-3:2001.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9692-3:2016 has been approved by CEN as EN ISO 9692-3:2016 without any
modification.
INTERNATIONAL ISO
STANDARD 9692-3
Second edition
2016-06-15
Welding and allied processes — Types
of joint preparation —
Part 3:
Metal inert gas welding and tungsten
inert gas welding of aluminium and
its alloys
Soudage et techniques connexes — Types de préparation de joints —
Partie 3: Soudage MIG et TIG de l’aluminium et de ses alliages
Reference number
ISO 9692-3:2016(E)
©
ISO 2016
ISO 9692-3:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

ISO 9692-3:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Materials . 1
4 Welding processes . 1
5 Finish . 1
6 Type of joint preparation . 2
ISO 9692-3:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT), see the following URL: Foreword — Supplementary information.
The committee responsible for this document is ISO/TC 44, Welding and allied processes, Subcommittee
SC 7, Representation and terms.
This second edition cancels and replaces the first edition (ISO 9692–3:2000), which has been technically
revised.
ISO 9692 consists of the following parts, under the general title Welding and allied processes — Types of
joint preparation:
— Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and be
...