SIST EN IEC 61340-4-3:2018
(Main)Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear (IEC 61340-4-3:2017)
Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear (IEC 61340-4-3:2017)
This part of IEC 61340 describes a test method for determining the electrical resistance of
footwear (shoes, slippers or booties) used in the control of electrostatic potential on people.
This document is suitable for use by the manufacturer of footwear as well as the end user. A
method for measuring the electrical resistance of footwear alone is described and serves as a
qualification test or an acceptance test for new footwear, or as a periodic test of in-use
footwear.
Although this document does not include requirements for personal safety, footwear used
within the scope of this document in all places of work is regulated by the relevant local
statutory requirements regarding the health and safety of all persons.
Insulating footwear is not included within the scope of this document although the electrical
resistance measurement techniques can be applicable.
Elektrostatik - Teil 4-3: Standard-Prüfverfahren für spezielle Anwendungen - Schuhwerk (IEC 61340-4-3:2017)
Electrostatique - Partie 4-3: Méthodes d'essai normalisées pour des applications spécifiques - Chaussures (IEC 61340-4-3:2017)
L'IEC 61340-4-3:2017 décrit une méthode d'essai employée pour déterminer la résistance électrique des articles chaussants (chaussures, chaussons ou bottillons) utilisés pour la maîtrise du potentiel électrostatique du personnel. Le présent document est utilisable aussi bien par les fabricants de chaussures que par les utilisateurs finaux. Une méthode de mesure de la résistance électrique de la chaussure seule est décrite et sert d'essai de qualification ou d'acceptation pour de nouvelles chaussures, ou d'essai périodique des chaussures en cours d'utilisation.
Bien que le présent document ne comporte aucune exigence relative à la sécurité des personnes, l'attention est attirée sur le fait que toutes les parties concernées sont tenues de se conformer aux exigences légales locales relatives à la santé et à la sécurité des personnes à tous les postes de travail où sont utilisées des chaussures relevant du domaine d'application du présent document.
Les chaussures isolantes ne sont pas incluses dans le domaine d'application du présent document, bien que les techniques de mesure de la résistance électrique puissent leur être appliquées.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) la classification des chaussures comme électrostatiquement conductrices ou dissipatrices a été supprimée; elle n'est pas spécifiée;
b) les classes d'environnement pour les essais en laboratoire ont été supprimées; un seul ensemble de conditions pour le préconditionnement, le conditionnement et les essais est spécifié;
c) la référence à l'IEC 61340-2-3 pour mesurer la résistance de la contre-électrode insérée à l'intérieur de la chaussure a été supprimée.
Elektrostatika - 4-3. del: Standardne preskusne metode za posebno uporabo - Obutev (IEC 61340-4-3:2017)
Ta del standarda IEC 61340 vsebuje opis preskusne metode za ugotavljanje električne upornosti obutve (čevljev, copat ali škornjev), ki se uporabljajo pri kontroli elektrostatičnega potenciala na ljudeh. Ta dokument lahko uporabljata proizvajalec obutve in končni uporabnik. Opisan je način merjenja električne upornosti same obutve in se uporablja kot preskus kakovosti ali preskus sprejemljivosti za novo obutev ali kot redni preskus uporabljane obutve.
Čeprav ta dokument ne vključuje zahtev za osebno varnost, urejajo obutev, uporabljano v okviru obsega tega dokumenta na vseh delovnih mestih, relevantne lokalne zahteve iz zakonov v zvezi z varnostjo in zdravjem vseh oseb.
Izolacijska obutev ni vključena v obseg tega dokumenta, čeprav je mogoče uporabiti tehnike merjenja električne upornosti.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektrostatika - 4-3. del: Standardne preskusne metode za posebno uporabo - Obutev (IEC 61340-4-3:2017)Elektrostatik - Teil 4-3: Standard-Prüfverfahren für spezielle Anwendungen - Schuhwerk (IEC 61340-4-3:2017)Electrostatique - Partie 4-3: Méthodes d'essai normalisées pour des applications spécifiques - Chaussures (IEC 61340-4-3:2017)Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear (IEC 61340-4-3:2017)61.060ObuvalaFootwear17.220.99Drugi standardi v zvezi z elektriko in magnetizmomOther standards related to electricity and magnetismICS:Ta slovenski standard je istoveten z:EN IEC 61340-4-3:2018SIST EN IEC 61340-4-3:2018en01-maj-2018SIST EN IEC 61340-4-3:2018SLOVENSKI
STANDARDSIST EN 61340-4-3:20021DGRPHãþD
SIST EN IEC 61340-4-3:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 61340-4-3
March 2018 ICS 17.220.99; 29.020; 61.060
Supersedes
EN 61340-4-3:2001
English Version
Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear (IEC 61340-4-3:2017)
Electrostatique - Partie 4-3: Méthodes d'essai normalisées pour des applications spécifiques - Chaussures (IEC 61340-4-3:2017)
Elektrostatik - Teil 4-3: Standard-Prüfverfahren für spezielle Anwendungen - Schuhwerk (IEC 61340-4-3:2017) This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61340-4-3:2018 E SIST EN IEC 61340-4-3:2018
EN IEC 61340-4-3:2018 (E)
2
European foreword The text of document 101/544/FDIS, future edition 2 of IEC 61340-4-3, prepared by IEC/TC 101 "Electrostatics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61340-4-3:2018.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-10-17 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-01-17
This document supersedes EN 61340-4-3:2001.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 61340-4-3:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 61340-2-3 NOTE Harmonized as EN 61340-2-3.
SIST EN IEC 61340-4-3:2018
EN IEC 61340-4-3:2018 (E)
3 Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2
Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 62631-3-1 -
Dielectric and resistive properties of solid insulating materials - Part 3-1 Determination of resistive properties (DC methods) - Volume resistance and volume resistivity, general method EN 62631-3-1 -
IEC 62631-3-2 -
Dielectric and resistive properties of solid insulating materials - Part 3-2 Determination of resistive properties (DC methods) - Surface resistance and surface resistivity EN 62631-3-2 -
IEC 62631-3-3 -
Dielectric and resistive properties of solid insulating materials - Part 3-3: Determination of resistive properties (DC methods) - Insulation resistance EN 62631-3-3 -
SIST EN IEC 61340-4-3:2018
SIST EN IEC 61340-4-3:2018
IEC 61340-4-3 Edition 2.0 2017-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Electrostatics –
Part 4-3: Standard test methods for specific applications – Footwear
Électrostatique – Partie 4-3: Méthodes d'essai normalisées pour des applications spécifiques – Chaussures INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 17.220.99; 29.020; 61.060
ISBN 978-2-8322-5139-3
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN IEC 61340-4-3:2018
– 2 – IEC 61340-4-3:2017 © IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions. 6 4 Test specimens . 7 5 Environment for conditioning and testing . 7 5.1 Conditioning and controlled environment for qualification tests . 7 5.2 Environment for acceptance tests . 7 6 Test report . 7 7 Test equipment . 8 7.1 Load applied to footwear under test . 8 7.2 Conductive electrode . 8 7.3 Counter electrode . 8 7.4 Insulative support plate . 8 7.5 Resistance measurement apparatus . 8 7.5.1 General . 8 7.5.2 Laboratory evaluations (qualification testing) . 8 7.5.3 Acceptance testing . 9 7.6 Environmental test chamber . 9 8 Test procedure . 9 9 Repeatability and reproducibility . 10 Bibliography . 11
Figure 1 – Form-fitting weight and measuring set-up (schematic) . 9
Table 1 – Controlled conditions for electrical measurements . 7
SIST EN IEC 61340-4-3:2018
IEC 61340-4-3:2017 © IEC 2017 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ELECTROSTATICS –
Part 4-3: Standard test methods for specific applications –
Footwear
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61340-4-3 has been pr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.