SIST EN ISO 13916:2018

SLOVENSKI STANDARD
oSIST prEN ISO 13916:2017
01-maj-2017
Varjenje - Navodilo za merjenje temperature predgrevanja, medvarkovne
temperature in temperature dogrevanja (ISO/DIS 13916:2017)
Welding - Guidance on the measurement of preheating temperature, interpass
temperature and preheat maintenance temperature (ISO/DIS 13916:2017)
Schweißen - Anleitung zur Messung der Vorwärm-, Zwischenlagen- und Haltetemperatur
(ISO/DIS 13916:2017)
Soudage - Lignes directrices pour le mesurage de la température de préchauffage, de la
température entre passes et de la température de maintien du préchauffage (ISO/DIS
13916:2017)
Ta slovenski standard je istoveten z: prEN ISO 13916
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
oSIST prEN ISO 13916:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13916:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13916:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13916
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2017-01-18 2017-04-11
Welding — Guidance on the measurement of preheating
temperature, interpass temperature and preheat
maintenance temperature
Soudage — Lignes directrices pour le mesurage de la température de préchauffage, de la température
entre passes et de la température de maintien du préchauffage
ICS: 25.160.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 13916:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13916:2017
ISO/DIS 13916:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13916:2017
ISO/DIS 13916:2017(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Terms and definitions . 1
3 Requirements . 1
3.1 Point of measurement. 1
3.2 Time of measurement . 2
3.3 Test equipment . 3
4 Test report . 3
5 Designation . 3
5.1 Example 1 . 3
5.2 Example 2 . 3
Bibliography . 4
© ISO 2017 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 13916:2017
ISO/DIS 13916:2017(E)

Foreword
ISO 13916 was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Quality management in the field of welding.
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison wi
...

SLOVENSKI STANDARD
oSIST prEN ISO 13916:2015
01-december-2015
Varjenje - Navodilo za merjenje temperature predgrevanja, medvarkovne
temperature in temperature dogrevanja (ISO/DIS 13916:2015)
Welding - Guidance on the measurement of preheating temperature, interpass
temperature and preheat maintenance temperature (ISO/DIS 13916:2015)
Schweißen - Anleitung zur Messung der Vorwärm-, Zwischenlagen- und Haltetemperatur
(ISO/DIS 13916:2015)
Soudage - Lignes directrices pour le mesurage de la température de préchauffage, de la
température entre passes et de la température de maintien du préchauffage (ISO/DIS
13916:2015)
Ta slovenski standard je istoveten z: prEN ISO 13916:2015
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
oSIST prEN ISO 13916:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13916:2015

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13916:2015
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13916
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2015-09-24 2015-12-24
Welding — Guidance on the measurement of preheating
temperature, interpass temperature and preheat
maintenance temperature
Soudage — Lignes directrices pour le mesurage de la température de préchauffage, de la température
entre passes et de la température de maintien du préchauffage
ICS: 25.160.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 13916:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13916:2015
ISO/DIS 13916:2015(E) ISO/CD 13916

Contents Page
Foreword . iv
1 Scope . 1
2 Terms and definitions . 1
3 Requirements . 1
3.1 Point of measurement . 1
3.2 Time of measurement . 3
3.3 Test equipment . 3
4 Test report . 3
5 Designation . 3
5.1 Example 1 . 3
5.2 Example 2 . 3
Bibliography . 4


COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
iii
© ISO 2015 – All rights reserved
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13916:2015
ISO/CD 13916
Contents Page
Foreword . iv
1 Scope . 1
2 Terms and definitions . 1
3 Requirements . 1
3.1 Point of measurement . 1
3.2 Time of measurement . 3
3.3 Test equipment . 3
4 Test report . 3
5 Designation .
...