EN ISO 13916:2017

SLOVENSKI STANDARD
01-februar-2018
1DGRPHãþD
SIST EN ISO 13916:1998
Varjenje - Navodilo za merjenje temperature predgrevanja, medvarkovne
temperature in temperature vzdrževanja (ISO 13916:2017)
Welding - Measurement of preheating temperature, interpass temperature and preheat
maintenance temperature (ISO 13916:2017)
Schweißen - Anleitung zur Messung der Vorwärm-, Zwischenlagen- und Haltetemperatur
(ISO 13916:2017)
Soudage - Mesurage de la température de préchauffage, de la température entre passes
et de la température de maintien du préchauffage (ISO 13916:2017)
Ta slovenski standard je istoveten z: EN ISO 13916:2017
ICS:
17.200.99 Drugi standardi v zvezi s Other standards related to
termodinamiko thermodynamics
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 13916
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2017
EUROPÄISCHE NORM
ICS 25.160.10 Supersedes EN ISO 13916:1996
English Version
Welding - Measurement of preheating temperature,
interpass temperature and preheat maintenance
temperature (ISO 13916:2017)
Soudage - Mesurage de la température de Schweißen - Anleitung zur Messung der Vorwärm-,
préchauffage, de la température entre passes et de la Zwischenlagen- und Haltetemperatur (ISO
température de maintien du préchauffage (ISO 13916:2017)
13916:2017)
This European Standard was approved by CEN on 5 December 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13916:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (EN ISO 13916:2017) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018 and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13916:1996.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13916:2017 has been approved by CEN as EN ISO 13916:2017 without any modification.

INTERNATIONAL ISO
STANDARD 13916
Second edition
2017-10
Welding — Measurement of
preheating temperature, interpass
temperature and preheat
maintenance temperature
Soudage — Mesurage de la température de préchauffage, de la
température entre passes et de la température de maintien du
préchauffage
Reference number
ISO 13916:2017(E)
©
ISO 2017
ISO 13916:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 13916:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 1
4.1 Point of measurement. 1
4.2 Time of measurement . 3
4.3 Test equipment . 3
5 Test report . 3
6 Designation . 3
6.1 General .
...