SIST EN 13375:2019

SLOVENSKI STANDARD
SIST EN 13375:2019
01-julij-2019
Nadomešča:
SIST EN 13375:2005
Hidroizolacijski trakovi - Hidroizolacija betonskih premostitvenih objektov in
drugih betonskih povoznih površin - Priprava preskušancev
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other
concrete surfaces trafficable by vehicles - Specimen preparation
Abdichtungsbahnen - Abdichtung für Betonbrücken und andere Verkehrsflächen aus
Beton - Probenvorbereitung
Feuilles souples d'étanchéité - Étanchéité des tabliers de ponts en béton et autres
surfaces en béton circulables par les véhicules - Préparation des éprouvettes
Ta slovenski standard je istoveten z: EN 13375:2019
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 13375:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13375:2019

---------------------- Page: 2 ----------------------

SIST EN 13375:2019


EN 13375
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2019
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN 13375:2004
English Version

Flexible sheets for waterproofing - Waterproofing of
concrete bridge decks and other concrete surfaces
trafficable by vehicles - Specimen preparation
Feuilles souples d'étanchéité - Étanchéité des tabliers Abdichtungsbahnen - Abdichtung für Betonbrücken
de ponts en béton et autres surfaces en béton und andere Verkehrsflächen aus Beton -
circulables par les véhicules - Préparation des Probenvorbereitung
éprouvettes
This European Standard was approved by CEN on 18 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13375:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13375:2019
EN 13375:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Specimens . 6
5 Base specimens . 7
5.1 General . 7
5.2 Specification of the concrete . 8
5.3 Surface roughness . 8
6 Application of the waterproofing system . 8
7 Asphalt layer . 9
7.1 Specifications . 9
7.1.1 General . 9
7.1.2 Mastic asphalt (MA, LMA) . 9
7.1.3 Asphalt concrete (AC) . 10
7.1.4 Porous asphalt (PA). 10
7.2 Laying and compaction . 10
7.3 Specimens type 2 . 10
8 Preparation of test specimens . 10
9 Storing . 11
10 Test report . 11
Bibliography . 12

2

---------------------- Page: 4 ----------------------

SIST EN 13375:2019
EN 13375:2019 (E)
European foreword
This document (EN 13375:2019) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for
waterproofing”, the secretariat of which is held by NEN.
This document shall be given the status of a national standard, either by publication of an identical text or by
endorsement, at the latest by October 2019, and conflicting national standards shall be withdrawn at the latest
by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13375:2004.
EN 13375:2019 includes the following significant technical changes with respect to EN 13375:2004:
— Change of Foreword into European Foreword;
— Clause 2, Normative references has been updated with citation of Bituminous mixtures specifications
EN13108-1, and -6 and -7; prEN17048 has been introduced;
— Clause 4, Table 1 has been updated with citation of EN numbers at each test method;
— Subclause 5.2 updated with the use of CEM I 52.5 N;
— Clause 6, Note 1 has been split into Note 1 and Note 2;
— Section 7.1.2, Mastic asphalt has been updated to EN13108-6 standard, and Grading (Figure 3) has been
deleted;
— Section 7.1.3, now “Asphalt Concrete", has been updated according to EN 13108-1 (previous title was
"Coarse bituminous mixture”);
— Section 7.1.4 “Porous Asphalt“ has been introduced as new section, according to EN13108-7.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 13375:2019
EN 13375:2019 (E)
Introduction
The purpose of this document is to give rules for the preparation of specimens for performance related tests
on waterproofing systems. This document also includes specifications for the base specimen concrete and for
the bituminous mixes for the asphalt layer in contact with the waterproofing and used for the test.
4

---------------------- Page: 6 ----------------------

SIST EN 13375:2019
EN 13375:2019 (E)
1 Scope
This document is one of a series of documents applicable to flexible sheets for waterproofing of concrete
bridge decks and other concrete surfaces trafficable by vehicles.
This document specifies:
— the composition, the characteristics and the preparation procedure of the base specimen concrete slabs;
— the composition, the characteristics and the preparation procedure of different bituminous mixtures for
the asphalt layer;
— the rules for the preparation of specimens.
This document outlines the specimen preparation for tests on the waterproofing systems which are referred
to in the different test standards.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 1766:2017, Products and systems for the protection and repair of concrete structures — Test methods —
Reference concretes for testing
EN 13036-1, Road and airfield surface characteristics — Test methods — Part 1: Measurement of pavement
surface macrotexture depth using a volumetric patch technique
EN 13108-1, Bituminous mixtures — Material specifications — Part 1: Asphalt Concrete
EN 13108-6, Bituminous mixtures — Material specifications — Part 6: Mastic Asphalt
EN 13108-7, Bituminous mixtures — Material specifications — Part 7: Porous Asphalt
EN 13596, Flexible sheets for waterproofing
...