SIST EN ISO 18674-3:2018/A1:2020

SLOVENSKI STANDARD
SIST EN ISO 18674-3:2018/A1:2020
01-julij-2020
Geotehnično preiskovanje in preskušanje - Geotehnične meritve - 3. del: Meritve
pomikov pravokotno na merilno os z inklinometri - Dopolnilo A1 (ISO 18674-
3:2017/Amd 1:2020)
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation
- Part 3: Measurement of displacements across a line: Inclinometers - Amendment 1
(ISO 18674-3:2017/Amd 1:2020)
Geotechnische Erkundung und Untersuchung - Geotechnische Messungen - Teil 3:
Verschiebungsmessungen quer zu einer Messlinie: Inklinometer - Änderung 1 (ISO
18674-3:2017/Amd 1:2020)
Reconnaissance et essais géotechniques - Surveillance géotechnique par
instrumentation in situ - Partie 3: Mesurages des déplacements perpendiculairement à
une ligne par inclinomètre - Amendement 1 (ISO 18674-3:2017/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 18674-3:2017/A1:2020
ICS:
17.020 Meroslovje in merjenje na Metrology and measurement
splošno in general
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
SIST EN ISO 18674-3:2018/A1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 18674-3:2018/A1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 18674-3:2018/A1:2020


EN ISO 18674-3:2017/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2020
EUROPÄISCHE NORM
ICS 13.080.20; 93.020
English Version

Geotechnical investigation and testing - Geotechnical
monitoring by field instrumentation - Part 3: Measurement
of displacements across a line: Inclinometers -
Amendment 1 (ISO 18674-3:2017/Amd 1:2020)
Reconnaissance et essais géotechniques - Surveillance Geotechnische Erkundung und Untersuchung -
géotechnique par instrumentation in situ - Partie 3: Geotechnische Messungen - Teil 3:
Mesurages des déplacements perpendiculairement à Verschiebungsmessungen quer zu einer Messlinie:
une ligne par inclinomètre - Amendement 1 (ISO Inklinometer - Änderung 1 (ISO 18674-3:2017/Amd
18674-3:2017/Amd 1:2020) 1:2020)
This amendment A1 modifies the European Standard EN ISO 18674-3:2017; it was approved by CEN on 23 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18674-3:2017/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 18674-3:2018/A1:2020
EN ISO 18674-3:2017/A1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 18674-3:2018/A1:2020
EN ISO 18674-3:2017/A1:2020 (E)
European foreword
This document (EN ISO 18674-3:2017/A1:2020) has been prepared by Technical Committee ISO/TC
182 "Geotechnics" in collaboration with Technical Committee CEN/TC 341 “Geotechnical Investigation
and Testing” the secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 18674-3:2017 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by September 2020,
and conflicting national standards shall be withdrawn at the latest by September 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark,
...