SIST EN 301 489-10:2002
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment
- Abstract
Revision of EN 301 489-10 to include the U.K. and Irish national variants of CT1 cordless telephones. This standard has one common requirements part plus specific parts for each of the radio equipment and services. This harmonised standard under the EMC Directive and article 3.1b of the R&TTE Dirctive. This does not include EMC requirements for equipment covered by the Marine Equipment Directive.
- Status
- Published
- Publication Date
- 31-Oct-2002
- Technical Committee
- RES - Radio equipment and systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Nov-2002
- Due Date
- 01-Nov-2002
- Completion Date
- 01-Nov-2002
SIST EN 301 489-10:2002 is the Slovenian adoption of ETSI EN 301 489-10 V1.2.1 for First Generation CT1 and CT1+ and Second Generation CT2 cordless telephone equipment. It specifies EMC test conditions, performance assessment and performance criteria for cordless telephone equipment and associated ancillary equipment, so manufacturers, test labs and conformity teams can judge whether the equipment behaves acceptably during electromagnetic disturbances.
What does SIST EN 301 489-10:2002 specify?
SIST EN 301 489-10:2002 covers the EMC assessment of CT1, CT1+ and CT2 cordless telephone equipment together with associated ancillary equipment. It is intended to be used with EN 301 489-1, and it gives the cordless-telephone-specific test setup, performance checks and acceptance criteria that supplement the common technical requirements.
The scope excludes antenna-port technical specifications and emissions from the enclosure port of the radio equipment, because those are handled in the relevant product standards. The document is also framed as a harmonised standard under the EMC Directive and the R&TTE Directive, and it does not cover EMC requirements for equipment within the Marine Equipment Directive.
| Annex | What it covers |
|---|---|
| Annex A | Informative definitions of the CT2, CT1 and CT1+ equipment types and their operating bands |
| Annex B | Bibliography |
The document is organised into clauses on scope, references, definitions and abbreviations, test conditions, performance assessment, performance criteria, and an applicability overview.
What are the key requirements of SIST EN 301 489-10:2002?
Clause 4 starts from the test conditions in EN 301 489-1 and adds cordless-telephone-specific arrangements. For transmitter testing, the equipment shall use normal test modulation; for speech equipment the audio input may be applied acoustically or through existing electrical connections, while non-speech equipment uses digital input through a cable, test jig or host equipment. In practice, this means the EUT has to be tested in a setup that reflects how it is actually used.
Clause 4.3 defines exclusion bands. For CT2, the exclusion band for transmitter and receiver parts extends from 820.9 MHz to 911.5 MHz. For CT1 and CT1+, the receiver exclusion band follows the operating band with a 5% extension at each end, and the transmitter exclusion band is ±50 kHz around the operating frequency. In practice, these are the frequencies that are not used for measuring the wanted signal as unwanted emission or interference.
Clause 4.4 deals with narrow band responses in receivers. A response is identified by a rise in speech output level for speech equipment, or by an increase in BER (Bit Error Ratio) for non-speech equipment, and a dropped link may also be used. The nominal offsets used for the identification process are ±1 MHz and then ±1.5 MHz for CT2, CT1 and CT1+ receivers.
Clause 5.2 gives two ways to assess host-dependent equipment and plug-in cards. The manufacturer may use a composite equipment combination with a specific host, or a test jig together with three different hosts. This matters because embedded radio parts can behave differently depending on the host electronics, power and layout.
Clause 5.3 and Clause 6 require checks on primary functions, maintained communications links, and stored user data. For speech equipment, the document also uses the audio breakthrough test, where analogue speech circuits are monitored and the output level is compared with the pre-test reference. In practice, the equipment must keep its link and not lose user settings while being stressed.
Clause 5.5 classifies equipment by intended power source. Equipment intended for vehicle battery use is also treated as mobile equipment, and equipment intended for AC mains use is also treated as base station equipment. That affects which EMC treatment applies during assessment.
Clause 6 sets separate performance criteria for CT, TT, CR and TR phenomena, plus ancillary equipment tested on its own. The common expectation is that the communications link is maintained, unintentional transmission does not occur, and declared user functions and stored data are preserved.
What terms does SIST EN 301 489-10:2002 define?
- CT1 equipment - First generation cordless telephone apparatus operating in the CT1 bands listed in Annex A.
- CT1+ equipment - First generation cordless telephone apparatus operating in the 885 MHz to 887 MHz and 930 MHz to 932 MHz bands.
- CT2 equipment - Second generation cordless telephone apparatus operating in the 864.1 MHz to 868.1 MHz band.
- Host equipment - Equipment that provides the main user function and houses the radio part, which depends on it for added functionality.
- Speech equipment - Cordless telephone equipment with microphones, loudspeakers or similar transducers for acoustic audio signals.
- Non-speech equipment - Cordless telephone equipment intended for digital data rather than acoustic speech.
- Equipment Under Test (EUT) - The item being assessed in the EMC test.
Who uses SIST EN 301 489-10:2002?
Manufacturers of CT1, CT1+ and CT2 cordless telephone equipment use this standard to design and document EMC compliance. Test laboratories use it to set up immunity and emission tests, including speech and data arrangements. Conformity assessment teams, quality managers and buyers use it to check that the right equipment class, host configuration and performance criteria are being applied.
What changed in SIST EN 301 489-10:2002 from the previous edition?
This revision of EN 301 489-10 adds the U.K. and Irish national variants of CT1 cordless telephones.
Which standards are used with SIST EN 301 489-10:2002?
| Reference | What it contributes |
|---|---|
| EN 301 489-1 | Common technical requirements, general test conditions, and the baseline emission and immunity framework |
| EN 300 176 (all parts) | DECT approval test specification, used here as a reference for acoustic test arrangements |
What does the SIST EN 301 489-10:2002 document contain?
The document contains clauses for test conditions, performance assessment, performance criteria and an applicability overview. It includes specific procedures for transmitter and receiver test signals, exclusion bands, narrow band response identification, host-dependent equipment assessment, loss of user control functions and audio breakthrough testing. Annex A gives the operating bands and type definitions for CT1, CT1+ and CT2, while Annex B lists bibliography items. Two figures show the audio breakthrough measurement and calibration set-ups used during testing.
Relations
- Official Journal Project Relation
SIST EN 301 489-10 V1.3.1:2003 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment - Effective Date
- 01-Dec-2009
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 301 489-10:2002 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment". This standard covers: Revision of EN 301 489-10 to include the U.K. and Irish national variants of CT1 cordless telephones. This standard has one common requirements part plus specific parts for each of the radio equipment and services. This harmonised standard under the EMC Directive and article 3.1b of the R&TTE Dirctive. This does not include EMC requirements for equipment covered by the Marine Equipment Directive.
Revision of EN 301 489-10 to include the U.K. and Irish national variants of CT1 cordless telephones. This standard has one common requirements part plus specific parts for each of the radio equipment and services. This harmonised standard under the EMC Directive and article 3.1b of the R&TTE Dirctive. This does not include EMC requirements for equipment covered by the Marine Equipment Directive.
SIST EN 301 489-10:2002 is classified under the following ICS (International Classification for Standards) categories: 33.050.10 - Telephone equipment; 33.060.01 - Radiocommunications in general; 33.100.01 - Electromagnetic compatibility in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 301 489-10:2002 has the following relationships with other standards: It is inter standard links to SIST EN 301 489-10 V1.3.1:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 301 489-10:2002 is associated with the following European legislation: Standardization Mandates: M/284, T-353. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 301 489-10:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]YUYLþQHElectromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.01Radijske komunikacije na splošnoRadiocommunications in general33.050.10Telefonska opremaTelephone equipmentICS:Ta slovenski standard je istoveten z:EN 301 489-10 Version 1.2.1SIST EN 301 489-10:2002en01-november-2002SIST EN 301 489-10:2002SLOVENSKI
STANDARD
ETSI ETSI EN 301 489-10 V1.2.1 (2001-11)2
Reference REN/ERM-EMC-219-10 Keywords CT, CT2, EMC, radio, regulation ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001. All rights reserved.
ETSI ETSI EN 301 489-10 V1.2.1 (2001-11)3 Contents Intellectual Property Rights.5 Foreword.5 1 Scope.7 2 References.7 3 Definitions and abbreviations.8 3.1 Definitions.8 3.2 Abbreviations.8 4 Test conditions.9 4.1 General.9 4.2 Arrangements for test signals.9 4.2.1 Arrangements for test signals at the input of transmitters.9 4.2.1.1 Speech equipment.9 4.2.1.2 Non-speech equipment.9 4.2.2 Arrangements for test signals at the output of transmitters.9 4.2.3 Arrangements for test signals at the input of receivers.9 4.2.4 Arrangements for test signals at the output of receivers.9 4.2.5 Arrangements for testing transmitter and receiver together (as a system).9 4.3 Exclusion bands.10 4.3.1 CT2 equipment.10 4.3.2 CT1 and CT1+ equipment.10 4.4 Narrow band responses on receivers or receivers which are part of transceivers.10 4.4.1 Identification criteria for speech equipment.10 4.4.2 Identification criteria for non-speech equipment.10 4.4.3 Nominal frequency offset used for the identification of narrow band responses.10 4.5 Normal test modulation.10 5 Performance assessment.11 5.1 General.11 5.2 Arrangements for the assessment of host dependant equipment and plug-in cards.11 5.2.1 Alternative A: composite equipment.11 5.2.2 Alternative B: use of a test jig and three hosts.11 5.3 Assessment procedures.12 5.3.1 Loss of user control functions or stored user defined data.12 5.3.2 Audio breakthrough.12 5.4 Ancillary equipment.13 5.5 Equipment classification.13 6 Performance criteria.13 6.1 General.13 6.2 Performance criteria for Continuous phenomena of Transceivers (CT).14 6.2.1 Speech equipment.14 6.2.2 Non-speech equipment.14 6.3 Performance criteria for Transient phenomena applied to Transceivers (TT).14 6.4 Performance criteria for Continuous phenomena applied to Receive-only equipment (CR).15 6.5 Performance criteria for Transient phenomena applied to Receive-only equipment (TR).15 6.6 Performance criteria for ancillary equipment tested on a stand alone basis.15 7 Applicability overview.15 7.1 Emission.15 7.1.1 General.15 7.1.2 Special conditions.15 7.2 Immunity.15 7.2.1 General.15 7.2.2 Special conditions.16 SIST EN 301 489-10:2002
ETSI ETSI EN 301 489-10 V1.2.1 (2001-11)4 Annex A (informative): Definitions of types of Cordless Telephone equipment in the scope of the present document.17 A.1 Second generation Cordless Telephone apparatus (CT2) for operation in the frequency band 864,1 MHz to 868,1 MHz.17 A.2 First generation Cordless Telephone apparatus (CT1) for operation in the frequency band 914 MHz to 915 MHz and 959 MHz to 960 MHz.17 A.3 First generation Cordless Telephone apparatus (CT1+) for operation in the frequency band 885 MHz to 887 MHz and 930 MHz to 932 MHz.17 A.4 First generation Cordless Telephone apparatus (CT1) for operation in the frequency band 1,6 MHz to 1,7 MHz for base stations (CFP) and 47 MHz for handsets (CPP).18 A.5 First generation Cordless Telephone apparatus (CT1) for operation in the frequency band 47 MHz for base stations (CFP) and 77 MHz for handsets (CPP).18 A.6 First generation Cordless Telephone apparatus (CT1) for operation in the frequency band 31 MHz for base stations (CFP) and 39 - 40 MHz for handsets (CPP).18 Annex B (informative): Bibliography.19 History.20
ETSI ETSI EN 301 489-10 V1.2.1 (2001-11)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [5] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC [3] as amended) and Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive [2]"). The present document is part 10 of a multi-part deliverable covering the ElectroMagnetic Compatibility (EMC) standard for radio equipment and services, as identified below: Part 1: "Common technical requirements"; Part 2: "Specific conditions for radio paging equipment"; Part 3: "Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz"; Part 4: "Specific conditions for fixed radio links and ancillary equipment and services"; Part 5: "Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech)"; Part 6: "Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment"; Part 7: "Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)"; Part 8: "Specific conditions for GSM base stations"; Part 9: "Specific conditions for wireless microphones and similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices"; Part 10: "Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment"; Part 11: "Specific conditions for analogue terrestrial sound broadcasting (Amplitude Modulation (AM) and Frequency Modulation (FM)) service transmitters"; Part 12: "Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)"; SIST EN 301 489-10:2002
ETSI ETSI EN 301 489-10 V1.2.1 (2001-11)6 Part 13: "Specific conditions for Citizens' Band (CB) radio and ancillary equipment (speech and non-speech)"; Part 14: "Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters"; Part 15: "Specific conditions for commercially available amateur radio equipment"; Part 16: "Specific conditions for analogue cellular radio communications equipment, mobile and portable"; Part 17: "Specific conditions for Wideband data and HIPERLAN equipment"; Part 18: "Specific conditions for Terrestrial Trunked Radio (TETRA) equipment"; Part 19: "Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications"; Part 20: "Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)"; Part 22: "Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment"; Part 23: "Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) Base Station (BS) radio, repeater and ancillary equipment"; Part 24: "Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment"; Part 25:
"Specific conditions for IMT-2000 CDMA Multi-carrier Mobile Stations and ancillary equipment"; Part 26: "Specific conditions for IMT-2000 CDMA Multi-carrier Base Stations and ancillary equipment".
National transposition dates Date of adoption of this EN: 23 November 2001 Date of latest announcement of this EN (doa): 28 February 2002 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 August 2002 Date of withdrawal of any conflicting National Standard (dow): 31 August 2003
ETSI ETSI EN 301 489-10 V1.2.1 (2001-11)7 1 Scope The present document, together with EN 301 489-1 [1], covers the assessment of First Generation (CT1 and CT1+) and Second Generation (CT2) Cordless Telephone equipment, and associated ancillary equipment, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for First Generation (CT1 and CT1+) and Second Generation (CT2) Cordless Telephone equipment, and associated ancillary equipment.
Definitions of types of Cordless Telephone equipment covered by the present document are given in annex A. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. [1] ETSI EN 301 489-1 (V1.3.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements". [2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. [3] Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility. [4] ETSI EN 300 176 (all parts): "Digital Enhanced Cordless Telecommunications (DECT); Approval test specification". [5] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. SIST EN 301 489-10:2002
ETSI ETSI EN 301 489-10 V1.2.1 (2001-11)8 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1] and the following apply: CT1 equipment: first generation Cordless Telephone apparatus which includes one or more transceivers and/or receivers and/or parts thereof which operate in the frequency bands detailed in clauses A2, A4, A5, and A6 of EN 301 489-10 CT1+ equipment: first generation Cordless Telephone apparatus which includes one or more transceivers and/or receivers and/or parts thereof which operate in the frequency bands 885 MHz to 887 MHz and 930 MHz to 932 MHz CT2 equipment: second generation Cordless Telephone apparatus which includes one or more transceivers and/or receivers and/or parts thereof which operate in the frequency band 864,1 MHz to 868,1 MHz host equipment: any equipment which has a complete user functionality when not connected to the cordless telephone or similar radio communications equipment, and to which this radio equipment provides additional functionality, and to which connection is necessary for this radio equipment to offer functionality, and in which the transceiver part of the radio equipment is physically installed non-speech equipment: cordless telephone or similar communications equipment intended for the provision and reception of digital data either originating from or destined to external digital speech processing circuitry or other external equipment speech equipment: cordless telephone or similar communications equipment containing transducers such as microphones and/or loudspeakers intended for the provision and reception of acoustic audio signals 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: BER Bit Error Ratio BPF Band Pass Filter BW BandWidth CF Carrier Frequency CFP Cordless Fixed Part
CPP Cordless Portable Part CR Continuous phenomena applied to cordless telephone or communication Receive-only equipment CT Continuous phenomena applied to cordless telephone or communication Transceivers CT1 Cordless Telephone, first generation CT1+ Cordless Telephone, first generation. Different frequency range from CT1 CT2 Cordless Telephone, second generation ERP Ear Reference Point MRP Mouth Reference Point SPL Sound Pressure Level TR Transient phenomena applied to cordless telephone or communication Receive-only equipment TT Transient phenomena applied to cordless telephone or communication Transceivers SIST EN 301 489-10:2002
ETSI ETSI EN 301 489-10 V1.2.1 (2001-11)9 4 Test conditions 4.1 General For the purposes of the present document, the test conditions of EN 301 489-1 [1], clause 4, shall apply as appropriate. Further product-related test conditions for cordless telephone or communications equipment are specified in the present document, clauses 4.2 to 4.5. 4.2 Arrangements for test signals The provisions of EN 301 489-1 [1], clause 4.2 shall apply. 4.2.1 Arrangements for test signals at the input of transmitters The provisions of EN 301 489-1 [1], clause 4.2.1 shall a
...