SIST EN 1301-2:2008

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 2: Mechanische EigenschaftenAluminium et alliages d'aluminium — Fil étiré — Partie 2 : Caractéristiques mécaniquesAluminium and aluminium alloys — Drawn wire — Part 2: Mechanical properties77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1301-2:2008SIST EN 1301-2:2008en,fr,de01-november-2008SIST EN 1301-2:2008SLOVENSKI
STANDARDSIST EN 1301-2:1998/AC:2004SIST EN 1301-2:19981DGRPHãþD



SIST EN 1301-2:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1301-2September 2008ICS 77.150.10Supersedes EN 1301-2:1997
English VersionAluminium and aluminium alloys - Drawn wire - Part 2:Mechanical propertiesAluminium et alliages d'aluminium - Fil étiré - Partie 2:Caractéristiques mécaniquesAluminium und Aluminiumlegierungen - Gezogene Drähte -Teil 2: Mechanische EigenschaftenThis European Standard was approved by CEN on 16 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1301-2:2008: ESIST EN 1301-2:2008



EN 1301-2:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Tensile test.4 Annex A (normative)
Rules for rounding.11 Bibliography.12
SIST EN 1301-2:2008



EN 1301-2:2008 (E) 3 Foreword This document (EN 1301-2:2008) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at the latest by March 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licenses on standardised standard products under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding standard. This document supersedes EN 1301-2:1997. Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 4 "Wires and drawing stock" to revise EN 1301-2:1997. Besides editorial adjustments in the text and update of normative references the following changes have been made:  Foreword amended;  Clause 2: EN 573-3 deleted and included in Bibliography;  Tables 1 to 6: Footnotes modified;  Table 2: Tempers H13 and H18 added for alloy EN AW-2011 and temper H18 added for alloys EN AW-2014A, EN AW-2017A, EN AW-2117 and EN AW-2024;  Table 5: Alloy EN AW-6056 added and temper H18 added for alloys EN AW-6061 and EN AW-6082;  Table 6: Temper H18 added. EN 1301 comprises the following parts under the general title: "Aluminium and aluminium alloys – Drawn wire":  Part 1: Technical conditions for inspection and delivery  Part 2: Mechanical properties  Part 3: Tolerances on dimensions According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 1301-2:2008



EN 1301-2:2008 (E) 4 1 Scope This document specifies the mechanical properties of aluminium and aluminium alloy drawn wires for general engineering applications (except aeronautical rivets). It applies to drawn wires, except for electrical or welding purposes. It does not apply to drawing stock. The designation of aluminium and aluminium alloys, their chemical composition and the temper designations used in this standard are in accordance with EN 573- 3 and EN 515 respectively. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 515:1993, Aluminium and aluminium alloys — Wrought products — Temper designations EN 1301-1, Aluminium and aluminium alloys — Drawn wire — Part 1: Technical conditions for inspection and delivery EN 10002-1, Metallic materials — Tensile testing — Part 1: Method of test at ambient temperature 3 Tensile test The conditions for the sampling shall be in accordance with EN 1301-1. The testing conditions specified in EN 10002-1 shall apply together with the following additional conditions:  full section test pieces shall be used;  elongation shall be measured on a reference length of 100 mm. Tensile strength shall conform to Tables 1 to 6. NOTE Typical values for proof stress and elongation,are given for information only. Tensile strength values shall be rounded in accordance with Annex A. For rivet wire in non heat treatable alloys delivered in H13 temper the mechanical properties shall be determined in the temper of delivery. For rivet wire in heat treatable alloys delivered in H13 temper, the mechanical properties shall be determined: a) in the delivered temper H13; b) and also in tempers: 1) T4 for EN AW-2017A,
...