Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control

This standard specifies requirements, tests and quality control for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at a low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and - groundwater.

Rohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 1: Anforderungen, Prüfungen, Güteüberwachung

Diese Norm legt die Anforderungen, Prüfungen und die Güteüberwachung für Rohre und Formstücke mit Steckmuffe aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr zum Bau von Abwasserleitungen, die in der Regel drucklos betrieben werden, fest. Bauteile im Sinne dieser Norm sind Rohre, Formstücke, Rohrverbindungen und Dichtmittel. Diese Norm gilt für Bauteile, die für das Ableiten von - häuslichem Abwasser; - Oberflächenwasser und - Grundwasser verwendet werden.

Tubes et raccords de tube soudés longitudinalement en acier galvanisé a chaud, a manchon enfichable pour réseaux d'assainissement - Partie 1: Prescriptions, essais, contrôle de qualité

La présente norme a pour but de définir les prescriptions, essais et contrôle qualité des tubes et raccords à manchon enfichable en acier galvanisés à chaud, soudés longitudinalement, pour les réseaux d'assainissement fonctionnant par gravité ou sous faible pression. Pour les besoins de la présente norme, les éléments sont des tubes, des raccords, des joints et des garnitures d'étanchéité. Cette norme s'applique à des éléments utilisés pour l'évacuation: - des eaux usées domestiques; - des eaux de surface; - des eaux souterraines.

Vzdolžno varjene jeklene cevi in spojniki, vroče galvanizirani, z obojko, za sisteme za odpadno vodo - 1. del: Zahteve, preskušanje in kontrola kakovosti

General Information

Status
Published
Publication Date
31-Oct-2000
ICS
77.140.75 - Steel pipes and tubes for specific use
 
93.030 - External sewage systems
Technical Committee
IOVO - Water supply and waste water engineering
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Nov-2000
Due Date
01-Nov-2000
Completion Date
01-Nov-2000
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
EN 1123-1:1999 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control

Relations

Amended By
SIST EN 1123-1:2000/A1:2004 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
Effective Date
22-Dec-2008
Child
SIST EN 1123-2:2000 - Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions
Effective Date
22-Dec-2008

Overview

EN 1123-1:1999 is a CEN standard that specifies the requirements, testing and quality control for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket intended for use in external wastewater systems. The standard covers components including pipes, fittings, joints and seals used for the discharge of domestic wastewater, surface water and groundwater, typically operating under gravity or at low head pressures.

Key Topics

  • Scope and component definitions - clarifies which pipes, fittings and joint types (spigot and socket) are covered and the intended wastewater applications.
  • Material and coating requirements - sets expectations for the steel and hot-dip galvanizing to ensure corrosion resistance appropriate for wastewater environments.
  • Dimensional and mechanical requirements - addresses geometry, tolerances and mechanical properties necessary for reliable installation and service (pipes and fittings manufactured by longitudinal welding).
  • Testing and inspection - requires testing regimes and inspection methods to verify compliance (e.g., dimensional checks, visual/coating assessments, joint/seal performance and basic mechanical tests).
  • Quality control - defines manufacturer quality control procedures, documentation and traceability to ensure consistent production and long-term durability.
  • Performance in service conditions - focuses on suitability for gravity flow and low-pressure wastewater systems rather than high-pressure or specialty industrial applications.

Applications

EN 1123-1 is intended for use in:

  • Municipal and civil external sewage and drainage networks
  • Stormwater and surface water conveyance systems
  • Groundwater drainage and related subsurface disposal works
  • Projects where longitudinally welded, hot-dip galvanized spigot-and-socket pipes are specified for corrosion-resistant, low-pressure wastewater conveyance

Typical users:

  • Pipe and fittings manufacturers seeking compliance and market access in Europe
  • Civil and municipal engineers and specifiers writing procurement or construction specs
  • Contractors and installers selecting appropriate pipe systems for external sewage works
  • Quality inspectors and testing laboratories performing compliance verification
  • Authorities and asset owners managing public drainage networks

Related Standards

  • EN 1123-1 forms part of a broader set of standards for wastewater pipe systems; users should also consult other EN standards and relevant national standards for complementary requirements (joint types, testing methods, installation practices and system design).

Keywords: EN 1123-1, hot-dip galvanized steel pipes, longitudinally welded, spigot and socket, wastewater systems, testing, quality control, pipe fittings.

Frequently Asked Questions

SIST EN 1123-1:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control". This standard covers: This standard specifies requirements, tests and quality control for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at a low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and - groundwater.

This standard specifies requirements, tests and quality control for longitudinally welded, hot-dip galvanized steel pipes and fittings with spigot and socket for use in waste water systems usually operating under gravity or at a low head of pressure. For the purposes of this standard, components are pipes, fittings, joints and seals. This standard is for components used for the discharge of: - domestic waste water; - surface water and - groundwater.

SIST EN 1123-1:2000 is classified under the following ICS (International Classification for Standards) categories: 77.140.75 - Steel pipes and tubes for specific use; 93.030 - External sewage systems. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 1123-1:2000 has the following relationships with other standards: It is inter standard links to SIST EN 1123-1:2000/A1:2004; is excused to SIST EN 1123-2:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN 1123-1:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 93/38/EEC; Standardization Mandates: M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase SIST EN 1123-1:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWLRohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 1: Anforderungen, Prüfungen, GüteüberwachungTubes et raccords de tube soudés longitudinalement en acier galvanisé a chaud, a manchon enfichable pour réseaux d'assainissement - Partie 1: Prescriptions, essais, contrôle de qualitéPipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control93.030Zunanji sistemi za odpadno vodoExternal sewage systems77.140.75Jeklene cevi in cevni profili za po
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...