SIST EN 12283:2003
(Main)Printing and business paper - Determination of toner adhesion
Printing and business paper - Determination of toner adhesion
This European Standard specifies the determination of the adhesion of dry toner on paper sheets, printed with imaging machines such as copiers and printers. The chosen measuring range allows discrimination of toner adhesion around the level found with many common paper and machine combinations. Since divers imaging processes give different toner adhesion, the described method at constant IGT speed is not advised to compare degree of toner adhesion between different types of machines.
Druck- und Büropapier - Bestimmug der Tonerhaftung
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Tonerhaftung auf Papierbogen fest, die mit Vervielfältigungsgeräten, wie Kopiergeräte und Drucker, bedruckt werden. Dieser ausgewählte Meßbereich ermöglicht eine Unterscheidung der Tonerhaftung auf einem Niveau, das bei vielen üblichen Kombinationen von Papier und Gerät gefunden wurde. Da unterschiedliche Vervielfältigungsverfahren eine unterschiedliche Tonerhaftung aufweisen, ist das beschriebene Verfahren mit konstanter IGT-Geschwindigkeit für einen Vergleich der Tonerhaftung zwischen unterschiedlichen Gerätearten nicht zu empfehlen.
Papier - Papier d'impression et de bureau - Détermination de l'adhésion du toner
La présente Norme européenne spécifie une méthode pour déterminer l'adhésion du toner sec au papier imprimé a partir de machines a reproduire telles que des photocopieurs et des imprimantes. La plage de mesurage choisie permet de distinguer le degré d'adhésion du toner généralement obtenu en fonction les combinaisons les plus courantes de papier et de machines.
Puisque l'adhésion du toner est différente selon les procédés de reproduction utilisés, il est déconseillé d'utiliser la présente méthode décrite a vitesse IGT constante pour comparer le degré d'adhésion du toner selon les différents types de machines.
Tiskovni papir in papirji za poslovne namene - Ugotavljanje vezivnosti tonerja
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tiskovni papir in papirji za poslovne namene - Ugotavljanje vezivnosti tonerjaDruck- und Büropapier - Bestimmug der TonerhaftungPapier - Papier d'impression et de bureau - Détermination de l'adhésion du tonerPrinting and business paper - Determination of toner adhesion85.080.10Pisarniški papirOffice paperICS:Ta slovenski standard je istoveten z:EN 12283:2002SIST EN 12283:2003en01-september-2003SIST EN 12283:2003SLOVENSKI
STANDARDSIST ENV 12283:19971DGRPHãþD
SIST EN 12283:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12283October 2002ICS 85.080Supersedes ENV 12283:1996English versionPrinting and business paper - Determination of toner adhesionPapier d'impression et de bureau - Détermination del'adhésion du tonerDruck- und Büropapier - Bestimmug der TonerhaftungThis European Standard was approved by CEN on 17 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12283:2002 ESIST EN 12283:2003
EN 12283:2002 (E)2ContentspageForeword.3Introduction.41Scope.42Normative references.43Terms and definitions.44Principle.55Sampling.56Apparatus and materials.56.1Imaging machine.56.2Toner.56.3Image to be printed.56.4IGT tester.56.5Picking oil.56.6Optical densitometer.56.7Internal reference sample.57Procedure.67.1Preparation of test pieces.67.2Picking test.67.3Determination of optical density.68Calculation.79Precision.79.1Internal reference paper.79.2Repeatability.710Test report.7SIST EN 12283:2003
EN 12283:2002 (E)3ForewordThis document (EN 12283:2002) has been prepared by Technical Committee CEN /TC 172 "Pulp, paper andboard", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest byApril 2003.This document supersedes ENV 12283:1996.With regard to ENV 12283:1996 the following changes have been made:a) the scope is described more precise;b) "internal reference paper" is defined and definition is added in clause 3;c) more precise explanations on the "procedure" are given in clause 6;d) deletion of the calculation of the optical density in clause 8;e) transformation from a European Prestandard (ENV) in a European Standard (EN) is intended;f) editorial updating.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 12283:2003
EN 12283:2002 (E)4IntroductionToner adhesion is an important print quality factor that depends on paper properties as well as printing machinecharacteristics. A quick qualitative impression can be obtained by folding a fully toned image area and inspecting for aloss of toner. Another qualitative test method is to press adhesive tape on to such an image, slowly separate theadhesive tape from the print and exa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.