Jewellery and precious metals — Grading polished diamonds — Terminology, classification and test methods

This document specifies the terminology, classification and the methods that are used for the grading and description of single unmounted polished diamonds over 0,25 carat (ct). This document applies to natural, unmounted, polished diamonds. It is not to be used for fancy coloured diamonds, synthetic diamonds, treated diamonds (other than is allowed for in 7.4), nor for assembled stones.

Joaillerie et métaux précieux — Classification des diamants taillés — Terminologie, graduations et méthodes d’essai

Le présent document spécifie la terminologie, les graduations et les méthodes qui sont utilisées pour la classification et la description des diamants taillés non montés individuels de plus de 0,25 carat (ct). Le présent document s'applique aux diamants taillés non montés naturels. Il ne doit pas être utilisé pour les diamants de couleur, les diamants synthétiques, les diamants traités (autres que ceux autorisés en 7.4), ni pour les pierres assemblées.

General Information

Status
Published
Publication Date
17-Sep-2020
Current Stage
6060 - International Standard published
Start Date
18-Sep-2020
Due Date
22-Oct-2022
Completion Date
18-Sep-2020
Ref Project

Buy Standard

Standard
ISO 24016:2020 - Jewellery and precious metals — Grading polished diamonds — Terminology, classification and test methods Released:19. 03. 2024
English language
55 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
REDLINE ISO 24016:2020 - Jewellery and precious metals — Grading polished diamonds — Terminology, classification and test methods Released:19. 03. 2024
English language
55 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 24016:2020 - Jewellery and precious metals -- Grading polished diamonds -- Terminology, classification and test methods
English language
55 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 24016:2020 - Joaillerie et métaux précieux — Classification des diamants taillés — Terminologie, graduations et méthodes d’essai Released:19. 03. 2024
French language
54 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
REDLINE ISO 24016:2020 - Joaillerie et métaux précieux — Classification des diamants taillés — Terminologie, graduations et méthodes d’essai Released:19. 03. 2024
French language
54 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 24016:2020 - Joaillerie et métaux précieux -- Classification des diamants taillés -- Terminologie, graduations et méthodes d’essai
French language
54 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International
Standard
ISO 24016
First edition
Jewellery and precious metals —
2020-09
Grading polished diamonds —
Terminology, classification and
Corrected version
test methods
2024-03
Joaillerie et métaux précieux — Classification des diamants taillés
— Terminologie, graduations et méthodes d’essai
Reference number
ISO 24016:2020(en) © ISO 2020

---------------------- Page: 1 ----------------------
ISO 24016:2020(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland

© ISO 2020 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 24016:2020(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General . 5
4.1 The use of the word “diamond” .5
4.2 Composite stones/assembled stones .5
5 Mass and measurements . 6
5.1 Mass .6
5.2 Measurements . .6
6 Colour . 6
6.1 General .6
6.1.1 Colourless to yellow, brown and grey (D to L) .6
6.1.2 Colourless to yellow, brown and grey (M to Z) .6
6.1.3 Other hues .7
6.2 Colour grades (colourless to yellow, brown and grey) .7
6.3 Colour grades (other than for yellow, brown and grey) .
...

Style Definition
...
Style Definition
...
Style Definition
...
ISO/TC 174/SC N 031
Style Definition
...
Date: ISO 24016:2020-05-18(en) Style Definition
...
Style Definition
...
ISO/DIS 24016:First edition
Style Definition
...
Style Definition
...
2020(E)-09
Style Definition
...
ISO/TC 174/SC /WG 2
Style Definition
...
Style Definition
...
Secretariat: SNV
Style Definition
...
Corrected version
Style Definition
...
2024-02
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Jewellery and precious metals — Grading polished diamonds —
Style Definition
...
Terminology, classification and test methods
Style Definition
...
Style Definition
...
Joaillerie et métaux précieux — Graduation deClassification des diamants polis taillés — Terminologie,
Style Definition
...
classificationgraduations et méthodes de testd’essai
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition

---------------------- Page: 1 ----------------------
ISO/PRF 24016:2020(E)en)
Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold, English (United Kingdom)
Copyright notice Formatted: HeaderCentered, Space After: 0 pt
Formatted: Left: 1.5 cm, Right: 1.5 cm, Top: 1.4 cm,
This© ISO document is a working draft2020
Gutter: 0 cm, Header distance from edge: 1.27 cm
All rights reserved. Unless otherwise specified, or committee draft and is copyright-protected by ISO. While required in
the reproductioncontext of working drafts or committee drafts in any form for use by participants in the ISO standards
development process is permitted without prior permission from ISO, neither its implementation, no part of this
document nor any extract from itpublication may be reproduced, stored or utilized otherwise in any form or transmitted
in any form for any other purposeby any means, electronic or mechanical, including photocopying, or posting on the
internet or an intranet, without prior written permission. Permission can be requested from either ISO.
Requests for permission to reproduce this document for at the purpose of selling it should be addressed as shownaddress
Formatted: Line spacing: single, Adjust space between
below or to ISO'sISO’s member body in the country of the requester:. Latin and Asian text, Adjust space between Asian text
and numbers
[Indicate the full address, telephone number, fax number, telex number, and electronic mail address, as appropriate, of
the Copyright Manager of the ISO member body responsible for the secretariat of the TC or SC within the framework of
which the working document has been prepared.]
Reproduction for sales purposes may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
Formatted: FooterPageRomanNumber
ii © ISO 2020 – All rights reserved
© ISO 2020 – All rights reserved

ii

---------------------- Page: 2 ----------------------
ISO/PRF 24016:2020(Een)
Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold, English (United Kingdom)
Contents
Formatted: Font: Bold
Formatted: HeaderCentered, Left
Foreword . x
Formatted: Adjust space between Latin and Asian text,
Introduction . xi
Adjust space between Asian text and numbers, Tab stops:
Not at 0.71 cm + 17.2 cm
1 Scope . 1
2 Normative references .
...

INTERNATIONAL ISO
STANDARD 24016
First edition
2020-09
Jewellery and precious metals —
Grading polished diamonds —
Terminology, classification and test
methods
Joaillerie et métaux précieux — Classification des diamants taillés —
Terminologie, graduations et méthodes d’essai
Reference number
ISO 24016:2020(E)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO 24016:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 24016:2020(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General . 5
4.1 The use of the word “diamond” . 5
4.2 Composite stones/assembled stones . 6
5 Mass and measurements . 6
5.1 Mass . 6
5.2 Measurements . 6
6 Colour . 6
6.1 General . 6
6.1.1 Colourless to yellow, brown and grey (D to L) . 6
6.1.2 Colourless to yellow, brown and grey (M to Z) . 7
6.1.3 Other hues . 7
6.2 Colour grades (colourless to yellow, brown and grey) . 7
6.3 Colour grades (other than for yellow, brown and grey) . 7
6.4 Fluorescence . 9
7 Clarity .
...

Norme
internationale
ISO 24016
Première édition
Joaillerie et métaux précieux —
2020-09
Classification des diamants taillés
— Terminologie, graduations et
Version corrigée
méthodes d’essai
2024-03
Jewellery and precious metals — Grading polished diamonds —
Terminology, classification and test methods
Numéro de référence
ISO 24016:2020(fr) © ISO 2020

---------------------- Page: 1 ----------------------
ISO 24016:2020(fr)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2020
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse

© ISO 2020 – Tous droits réservés
ii

---------------------- Page: 2 ----------------------
ISO 24016:2020(fr)
Sommaire Page
Avant-propos .v
Introduction .vi
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Généralités . 6
4.1 L’emploi du mot «diamant» .6
4.2 Pierres composites/pierres assemblées .6
5 Masse et dimensions . 6
5.1 Masse .6
5.2 Dimensions .6
6 Couleur . 7
6.1 Généralités .7
6.1.1 D’incolore à jaune, brun et gris (D à L).7
6.1.2 D’incolore à jaune, brun et gris (M à Z) .7
6.1.3 Autres tonalités .7
6.2 Grades de couleur (d’incolore à jaune, brun et gris) .7
6.3 Grades de couleur (autres que jaune, brun et gris) .
...

Formatted
...
Style Definition
...

Style Definition
...
ISO/TC 174
Style Definition
...
Style Definition
...
Date: 2020-08
Style Definition
...
Style Definition
...
ISO 24016:2020(Ffr)
Style Definition
...
ISO/TC 174
Style Definition
...
Style Definition
...
Secrétariat: DIN
Style Definition
...
Première édition Style Definition
...
Style Definition
...
2020-09
Style Definition
...
Style Definition
Version corrigée
...
2024-02
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Joaillerie et métaux précieux — Classification des diamants Style Definition
...
Style Definition
taillés — Terminologie, graduations et méthodes d’essai
...
Style Definition
...
Jewellery and precious metals — Grading polished diamonds — Terminology, classification and test
Style Definition
...
methods
Style Definition
...
Style Definition
ICS: 39.060; 01.040.39 .
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Type du document: Norme internationale
Style Definition
...
Style Definition
Sous-type du document:  .
Style Definition
...
Stade du document: (60) Publication
Style Definition
...
Style Definition
...
Langue du document: F
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...

---------------------- Page: 1 ----------------------
Formatted: Font: Bold
DOCUMENT PROTÉGÉ PAR COPYRIGHT
Type du document: Norme internationale
Sous-type du document:
Stade du document: (60) Publication
Langue du document: F

---------------------- Page: 2 ----------------------
ISO 24016:2020(Ffr)
Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold
© ISO 2020
Formatted: HeaderCentered, Left, Space After: 0 pt
Formatted: French (France)
Droits de reproductionTous droits réservés. Sauf indication contraireprescription différente ou nécessité dans le
Formatted: Left: 1.5 cm, Right: 1.5 cm, Bottom: 1 cm,
contexte de sa mise en oeuvre, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme
Gutter: 0 cm, Header distance from edge: 1.27 cm,
que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichageou la diffusion sur
Footer distance from edge: 0.5 cm
l’internet ou sur un Intranetintranet, sans autorisation écrite préalable. Les demandes d’autorisation peuventUne
Formatted: Default Paragraph Font, French (France)
autorisation peut être adresséesdemandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du
demandeur.
Formatted: French (France)
Formatted: Default Paragraph Font, French (France)
ISO copyright office
Formatted: French (France)
CP 401 • • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Formatted: Adjust space between Latin and Asian text,
Tel.Phone: + 41 22 749 01 11 Adjust space between Asian text and numbers
Formatted: French (France)
Fax + 41 22 749 09 47
Formatted: French (France)
E-mail: copyright@iso.org Formatted: French (France)
Site webWebsite: www.iso.org
Formatted: French (France)

Formatted: French (France)
www.iso.org
Formatted: French (France)
Publié en Suisse
Formatted: zzCopyright address, Indent: First line: 0
cm, Adjust space between Latin and Asian text, Adjust
space between Asian text and numbers
Formatted: French (France)
Formatted: French (France)
Formatted: zzCopyright address, Indent: First line: 0
cm, Adjust space between Latin and Asian text, Adjust
space between Asian text and numbers
Formatted: French (France)
Formatted: French (France)
Formatted: Indent: First line: 0 cm, Adjust space
between Latin and Asian text, Adjust space between
Asian text and numbers
Formatted: Font: 11 pt
Formatted: FooterPageRomanNumber
© ISO 2020 – Tous droits réservés iii
© ISO 2020 – Tous droits réservés

iii

---------------------- Page: 3 ----------------------
ISO 24016:2020(Ffr)
Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold, English (United Kingdom)
Formatted: Font: Bold, English (United Kingdom)
Sommaire Page
Formatted: Font: Bold
Formatted: HeaderCentered, Space After: 0 pt
Avant-propos . x
Formatted: English (United Kingdom)
Introduction .
...

NORME ISO
INTERNATIONALE 24016
Première édition
2020-09
Joaillerie et métaux précieux —
Classification des diamants taillés
— Terminologie, graduations et
méthodes d’essai
Jewellery and precious metals — Grading polished diamonds —
Terminology, classification and test methods
Numéro de référence
ISO 24016:2020(F)
©
ISO 2020

---------------------- Page: 1 ----------------------
ISO 24016:2020(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2020
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2020 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 24016:2020(F)

Sommaire Page
Avant-propos .v
Introduction .vi
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Généralités . 6
4.1 L’emploi du mot «diamant» . 6
4.2 Pierres composites/pierres assemblées . 6
5 Masse et dimensions . 6
5.1 Masse . 6
5.2 Dimensions . 6
6 Couleur . 7
6.1 Généralités . 7
6.1.1 D’incolore à jaune, brun et gris (D à L) . 7
6.1.2 D’incolore à jaune, brun et gris (M à Z) . 7
6.1.3 Autres tonalités . 7
6.2 Grades de couleur (d’incolore à jaune, brun et gris) . 7
6.3 Grades de couleur (autres que jaune, brun et gris) . 7
6.4 Fluorescence .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.