ISO 9346:1987/Amd 1:1996
(Amendment)Thermal insulation - Mass transfer - Physical quantities and definitions - Amendment 1
Thermal insulation - Mass transfer - Physical quantities and definitions - Amendment 1
Adds terms of physical quantities and definitions to clause 3.
Isolation thermique — Transfert de masse — Grandeurs physiques et définitions — Amendement 1
General Information
Relations
Frequently Asked Questions
ISO 9346:1987/Amd 1:1996 is a standard published by the International Organization for Standardization (ISO). Its full title is "Thermal insulation - Mass transfer - Physical quantities and definitions - Amendment 1". This standard covers: Adds terms of physical quantities and definitions to clause 3.
Adds terms of physical quantities and definitions to clause 3.
ISO 9346:1987/Amd 1:1996 is classified under the following ICS (International Classification for Standards) categories: 01.060 - Quantities and units; 27.220 - Heat recovery. Thermal insulation. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 9346:1987/Amd 1:1996 has the following relationships with other standards: It is inter standard links to ISO 9346:1987, ISO 9346:2007; is excused to ISO 9346:1987. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 9346:1987/Amd 1:1996 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL
STANDARD
First edition
1987-11-01
AMENDMENT 1
1996-02-01
Thermal insulation - Mass transfer - Physical
quantities and definitions
AMENDMENT 1
Isolation thermique - Transfer? de masse - Grandeurs physiques et dkfinitions
AMENDEMENT 7
Reference number
ISO 9346:1987/Amd.l :1996(E)
ISO 9346:1987/Amd.l:1996(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
Amendment 1 to International Standard ISO 9346:1987 was prepared by
Technical Committee ISO/TC 163, Thermal insulation.
0 ISO 1996
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying
and microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-l 21 1 Geneve 20 l Switzerland
Printed in Switzerland
@ ISO ISO 9346:1987/Amd.l:1996(E)
Mass transfer - Physical quantities
Thermal insulatim -
and definitions
AMENDMENT 1
Page 6
Add the following terms and definitions to clause 3.
function of time and area of surface, under specified conditions.
NOT-ES
For the case of gas transfer through a material bound by parallel surfaces this is often
referred to as “gas transmission rate”.
2 An alternative form of defi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...