ISO 45002:2023
(Main)Occupational health and safety management systems — General guidelines for the implementation of ISO 45001:2018
Occupational health and safety management systems — General guidelines for the implementation of ISO 45001:2018
This document gives guidance on the establishment, implementation, maintenance and continual improvement of an occupational health and safety (OH&S) management system that can help organizations conform to ISO 45001:2018. NOTE 1 While the guidance in this document is consistent with the ISO 45001:2018 OH&S management system model, it is not intended to provide interpretations of the requirements in ISO 45001. NOTE 2 The use of the term “should” in this document does not weaken any of the requirements in ISO 45001:2018 or add new requirements. NOTE 3 For most of the clauses in this document, there are real-life cases on how different types of organizations have implemented the requirements. These are not intended to suggest the only or best way to do this, but to describe one way this was done by an organization.
Systèmes de management de la santé et de la sécurité au travail — Lignes directrices générales pour la mise en œuvre de l'ISO 45001:2018
Sistem vodenja varnosti in zdravja pri delu - Splošne smernice za implementacijo standarda ISO 45001:2018
Ta dokument podaja navodila za vzpostavitev, izvedbo, vzdrževanje in stalno izboljševanje sistema za upravljanje varnosti in zdravja pri delu (OH&S), ki lahko pomaga organizacijam zagotavljati skladnost s standardom ISO 45001:2018.
OPOMBA 1: Smernice v tem dokumentu so sicer skladne z modelom sistema upravljanja varnosti in zdravja pri delu iz standarda ISO 45001:2018, vendar ne razlagajo zahtev iz standarda ISO 45001.
OPOMBA 2: Uporaba izraza »naj« v tem dokumentu ne zmanjšuje zahtev iz standarda ISO 45001:2018 ali dodaja novih zahtev.
OPOMBA 3: Za večino točk v tem dokumentu obstajajo dejanski primeri, kako so različni tipi organizacij izvedli zahteve. Navedeni primeri niso edini ali najboljši način izvedbe, ampak opisujejo enega od možnih načinov izvedbe.
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ISO 45002:2023
01-junij-2023
Sistem vodenja varnosti in zdravja pri delu - Splošne smernice za implementacijo
standarda ISO 45001:2018
Occupational health and safety management systems - General guidelines for the
implementation of ISO 45001:2018
Systèmes de management de la santé et de la sécurité au travail — Lignes directrices
générales pour la mise en œuvre de l'ISO 45001:2018
Ta slovenski standard je istoveten z: ISO 45002:2023
ICS:
03.100.70 Sistemi vodenja Management systems
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
SIST ISO 45002:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 45002:2023
---------------------- Page: 2 ----------------------
SIST ISO 45002:2023
INTERNATIONAL ISO
STANDARD 45002
First edition
2023-02
Occupational health and safety
management systems — General
guidelines for the implementation of
ISO 45001:2018
Systèmes de management de la santé et de la sécurité au travail —
Lignes directrices générales pour la mise en œuvre de l'ISO
45001:2018
Reference number
ISO 45002:2023(E)
© ISO 2023
---------------------- Page: 3 ----------------------
SIST ISO 45002:2023
ISO 45002:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
---------------------- Page: 4 ----------------------
SIST ISO 45002:2023
ISO 45002:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Context of the organization .1
4.1 Understanding the organization and its context . 1
4.2 Understanding the needs and expectations of workers and other interested parties . 4
4.3 Determining the scope of the OH&S management system . 7
4.4 OH&S management system . 9
5 Leadership and worker participation . 9
5.1 Leadership and commitment . 9
5.2 OH&S policy . 11
5.3 Organizational roles, responsibilities and authorities .13
5.4 Consultation and participation of workers . 14
6 Planning .
...
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 45002
ISO/TC 283
Occupational health and safety
Secretariat: BSI
management systems — General
Voting begins on:
2022-10-28 guidelines for the implementation of
ISO 45001:2018
Voting terminates on:
2022-12-23
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 45002:2022(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2022
---------------------- Page: 1 ----------------------
ISO/FDIS 45002:2022(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 45002
ISO/TC 283
Occupational health and safety
Secretariat: BSI
management systems — General
Voting begins on:
guidelines for the implementation of
ISO 45001:2018
Voting terminates on:
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 45002:2022(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2022 – All rights reserved
NATIONAL REGULATIONS. © ISO 2022
---------------------- Page: 2 ----------------------
ISO/FDIS 45002:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Context of the organization .1
4.1 Understanding the organization and its context . 1
4.2 Understanding the needs and expectations of workers and other interested parties . 4
4.3 Determining the scope of the OH&S management system . 7
4.4 OH&S management system . 9
5 Leadership and worker participation . 9
5.1 Leadership and commitment . 9
5.2 OH&S policy . 11
5.3 Organizational roles, responsibilities and authorities .
...
© ISO 2022 – All rights reserved
ISO/FDIS 45002:2022(E)
Date: 2022-0810-13
ISO TC 283/WG 3
Secretariat: BSI
Occupational health and safety management systems — General
guidelines for the implementation of ISO 45001:2018
---------------------- Page: 1 ----------------------
ISO/FDIS 45002:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of
this publication may be reproduced or utilized otherwise in any form or by any means, electronic or
mechanical, including photocopying, or posting on the internet or an intranet, without prior written
permission. Permission can be requested from either ISO at the address below or ISO’s member body in the
country of the requester.
ISO Copyright Office
CP 401 • CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland.
ii © ISO 2022 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/FDIS 45002:2022(E)
Contents
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Context of the organization . 1
4.1 Understanding the organization and its context . 1
4.2 Understanding the needs and expectations of workers and other interested parties 5
4.3 Determining the scope of the OH&S management system . 9
4.4 OH&S management system . 11
5 Leadership and worker participation . 11
5.1 Leadership and commitment . 11
5.2 OH&S policy . 13
5.3 Organizational roles, responsibilities and authorities . 15
5.4 Consultation and participation of workers . 16
6 Planning . 18
6.1 Actions to address risks and opportunities . 18
6.1.1 General . 18
6.1.2 Hazard identification and assessment of risks and opportunities . 19
6.1.3 Determination of legal requirements and other requirements . 32
6.1.4 Planning action . 35
6.2 OH&S objectives and planning to achieve them . 36
6.2.1 OH&S objectives . 36
6.2.2 Planning to achieve OH&S objectives . 37
7 Support . 38
7.1 Resources . 38
7.2 Competence . 39
7.3 Awareness . 41
7.4 Communi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.