iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60245-3:1994/AMD1:1997

(Amendment)

Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables

Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables

Specifies some magnetic and mechanical properties of sintered soft magnetic metals which are used for components made by a powder metallurgical process only.

Amendement 1 - Conducteurs et câbles isolés au caoutchouc - Tension assignée au plus égale à 450/750 V - Partie 3: Conducteurs isolés au silicone, résistant à la chaleur

Spécifie quelques propriétés magnétiques et mécaniques de métaux magnétiques doux frittés qui sont utilisés pour des composants réalisés uniquement par la métallurgie des poudres.

General Information

Status
Published
Publication Date
09-Jun-1997
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
29.030 - Magnetic materials
29.060.20 - Cables
Technical Committee
TC 20 - Electric cables
Drafting Committee
WG 17 - TC 20/WG 17
Current Stage
PPUB - Publication issued
Start Date
30-Jun-1997
Completion Date
10-Jun-1997
Ref Project

Buy Standard

IEC 60245-3:1994/AMD1:1997 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables Released:6/10/1997IEC 60245-3:1994/AMD1:1997 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables Released:6/10/1997
PreviousNext
Standard
IEC 60245-3:1994/AMD1:1997 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables Released:6/10/1997
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
IEC 60245-3:1994/AMD1:1997 - Amendement 1 - Conducteurs et câbles isolés au caoutchouc - Tension assignée au plus égale à 450/750 V - Partie 3: Conducteurs isolés au silicone, résistant à la chaleur Released:6/10/1997IEC 60245-3:1994/AMD1:1997 - Amendement 1 - Conducteurs et câbles isolés au caoutchouc - Tension assignée au plus égale à 450/750 V - Partie 3: Conducteurs isolés au silicone, résistant à la chaleur Released:6/10/1997
PreviousNext
Standard
IEC 60245-3:1994/AMD1:1997 - Amendement 1 - Conducteurs et câbles isolés au caoutchouc - Tension assignée au plus égale à 450/750 V - Partie 3: Conducteurs isolés au silicone, résistant à la chaleur Released:6/10/1997
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
IEC 60245-3:1994/AMD1:1997 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cablesIEC 60245-3:1994/AMD1:1997 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
PreviousNext
Standard
IEC 60245-3:1994/AMD1:1997 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
English and French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


INTERNATIONAL IEC
STANDARD 60245-3
AMENDMENT 1
1997-06
Amendment 1
Rubber insulated cables –
Rated voltages up to and including 450/750 V –
Part 3:
Heat resistant silicone insulated cables

This English-language version is derived from the original
bilingual publication by leaving out all French-language
pages. Missing page numbers correspond to the French-
language pages.
 IEC 1997 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
B
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
...


NORME CEI
INTERNATIONALE 60245-3
AMENDEMENT 1
1997-06
Amendement 1
Conducteurs et câbles isolés au caoutchouc –
Tension assignée au plus égale à 450/750 V –
Partie 3:
Conducteurs isolés au silicone,
résistant à la chaleur
Cette version française découle de la publication d’origine
bilingue dont les pages anglaises ont été supprimées.
Les numéros de page manquants sont ceux des pages
supprimées.
 IEC 1997 Droits de reproduction réservés
Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun
procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
B
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur

– 2 – 60245
...


NORME
CEI
INTERNATIONALE
IEC
60245-3
INTERNATIONAL
STANDARD
AMENDEMENT 1
AMENDMENT 1
1997-06
Amendement 1
Conducteurs et câbles isolés au caoutchouc –
Tension assignée au plus égale à 450/750 V –
Partie 3:
Conducteurs isolés au silicone, résistant à la chaleur
Amendment 1
Rubber insulated cables –
Rated voltages up to and including 450/750 V –
Part 3:
Heat resistant silicone insulated cables
 IEC 1997 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE B
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

– 2 – 60245-3 amend. 1 © CEI:1997
AVANT-PROPOS
Le présent amendement a été établi par le sous-comité 20B: Câbles de basse tension, du
comité d'études 20 de la CEI: Câbles électriques.
Le texte de cet amendement est issu des documents suivants:
FDIS Rapport de vote
20B/229/FDIS 20B/244/RVD
Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l’approbation de cet amendement.
___________
Page 10
Tableau 1 – Dimensions des conducteurs du type 245 IEC 03
Remplacer le tableau 1 existant par le nouveau tableau 1 suivant:
Tableau 1 – Dimensions des conducte
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60245-6:1994/AMD1:1997(Amendment)
Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables

This guide defines methods of test for evaluating the properties of interlaminar insulation coatings applied to magnetic steel sheet and strip in the range of temperatures from ambient to 800 °C as a basis for a type test.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    3 pages
    English and French language
    sale 15% off
IEC
IEC 60404-4:1995+AMD1:2000+AMD2:2008 CSV(Main)
Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials

Describes the terminology and two measuring methods, namely: the ring method and the permeameter method. Both methods use a test specimen in a closed magnetic circuit. Description of the test equipment and the electric circuits is given. This consolidated version consists of the second edition (1995) and its amendment 1 (2000). Therefore, no need to order amendment in addition to this publication.

  • Standard
    60 pages
    English and French language
    sale 15% off
IEC
IEC 60245-6:1994/AMD1:1997(Amendment)
Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables

This guide defines methods of test for evaluating the properties of interlaminar insulation coatings applied to magnetic steel sheet and strip in the range of temperatures from ambient to 800 °C as a basis for a type test.

  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    3 pages
    English and French language
    sale 15% off
IEC
IEC 62282-8-201:2024(Main)
Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems

IEC 62282-8-201:2024 is available as IEC 62282-8-201:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62282-8-201:2024 defines the evaluation methods of typical performances for electric energy storage systems using hydrogen. It is applicable to the systems that use electrochemical reaction devices for both power charge and discharge. This document applies to systems that are designed and used for service and operation in stationary locations (indoor and outdoor). It specifies performance evaluation methods for electric energy storage systems using hydrogen that employ electrochemical reactions both for water and steam electrolysis and electric power generation. This document is intended for power-to-power systems which typically employ a set of electrolyser and fuel cell, or a reversible cell for devices of electric charge and discharge. This second edition cancels and replaces the first edition published in 2020.
This edition includes the following significant technical changes with respect to the previous edition:
a) consideration of systems connected to hydrogen supply infrastructure (hydrogen grids, vessels, caverns or pipelines);
b) hydrogen input and output rate is added in the system parameters (5.10);
c) electric energy storage capacity test is revised (6.2);
d) roundtrip electrical efficiency test is revised (6.5);
e) hydrogen input and output rate test is added (6.6.6).

  • Standard
    116 pages
    English language
    sale 15% off
  • Standard
    75 pages
    English and French language
    sale 15% off
IEC
IEC 61184:2017/AMD2:2024(Amendment)
Amendment 2 - Bayonet lampholders
  • Standard
    5 pages
    English and French language
    sale 15% off
IEC
IEC 61674:2024(Main)
Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging

IEC 61674:2024 specifies the performance and some related constructional requirements of DIAGNOSTIC DOSIMETERS intended for the measurement of AIR KERMA, AIR KERMA LENGTH PRODUCT or AIR KERMA RATE, in photon radiation fields used in medical X-ray imaging, such as RADIOGRAPHY, RADIOSCOPY and COMPUTED TOMOGRAPHY (CT), for X-RADIATION with generating potentials in the range of 20 kV to 150 kV. This document is applicable to the performance of DOSIMETERS with VENTED IONIZATION CHAMBERS and/or SEMICONDUCTOR DETECTORS as used in X-ray diagnostic imaging.
IEC 61674:2024 cancels and replaces the second edition published in 2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) for mammography, the manufacturer specifies the REFERENCE VALUE for the RADIATION QUALITY;
b) for mammography, the manufacturer provides the MINIMUM RATED RANGE of RADIATION QUALITIES for the compliance test on energy dependence of response;
c) the compliance test for analogue displays was removed;
d) the compliance tests for range reset, the effect of leakage and recombination losses were removed. These tests are already covered by the test on linearity and cannot be conducted for modern devices. The estimation of COMBINED STANDARD UNCERTAINTY was changed accordingly;
e) the compliance test for mains rechargeable and battery-operated dosimeters were updated for modern devices

  • Standard
    116 pages
    English language
    sale 15% off
  • Standard
    75 pages
    English and French language
    sale 15% off
IEC
CISPR 15:2018/AMD1:2024(Amendment)
Amendment 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

CISPR 15:2024 Amendment 1

  • Standard
    71 pages
    English and French language
    sale 15% off
IEC
CISPR 15:2018(Main)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

CISPR 15:2018 applies to the emission (radiated and conducted) of radiofrequency disturbances from:
- lighting equipment (3.3.16);
- the lighting part of multi-function equipment where this lighting part is a primary function;
- UV and IR radiation equipment for residential and non-industrial applications;
- advertising signs;
- decorative lighting;
- emergency signs.
Excluded from the scope of this document are:
- components or modules intended to be built into lighting equipment and which are not user-replaceable;
- lighting equipment operating in the ISM frequency bands (as defined in Resolution 63 (1979) of the ITU Radio Regulation);
- lighting equipment for aircraft and airfield facilities (runways, service facilities, platforms);
- video signs;
- installations;
- equipment for which the electromagnetic compatibility requirements in the radio-frequency range are explicitly formulated in other CISPR standards, even if they incorporate a built-in lighting function.
The frequency range covered is 9 kHz to 400 GHz. No measurements need to be performed at frequencies where no limits are specified in this document.
Multi-function equipment which is subjected simultaneously to different clauses of this document and/or other standards need to meet the provisions of each clause/standard with the relevant functions in operation.
For equipment outside the scope of this document and which includes lighting as a secondary function, there is no need to separately assess the lighting function against this document, provided that the lighting function was operative during the assessment in accordance with the applicable standard. The radiated emission requirements in this document are not intended to be applicable to the intentional transmissions from a radio transmitter as defined by the ITU, nor to any spurious emissions related to these intentional transmissions.
Within the remainder of this document, wherever the term "lighting equipment" or "EUT" is used, it is meant to be the electrical lighting and similar equipment falling in the scope of this document as specified in this clause. This ninth edition cancels and replaces the eighth edition published in 2013 and its Amendment 1:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) full editorial revision and restructuring;
b) the restriction to mains and battery operation is deleted in the scope;
c) radiated disturbance limits in the frequency range 300 MHz to 1 GHz have been introduced;
d) the load terminals limits and the CDNE (alternative to radiated emissions) limits have changed;
e) deletion of the insertion-loss requirements and the associated Annex A;
f) introduction of three basic ports: wired network ports, local wired ports and the enclosure port;
g) introduction of a more technology-independent approach;
h) replacement of Annex B (CDNE) by appropriate references to CISPR 16-series of standards;
i) modified requirements for the metal holes of the conical housing;
j) new conducted disturbance measurement method for GU10 self-ballasted lamp;
k) addition of current probe measurement method and limits for various types of ports (in addition to voltage limits and measurement methods);
l) introduction of the term ‘module’ (instead of independent auxiliary) and requirements for measurement of modules using a host (reference) system;
m) modified specifications for stabilization times of EUTs;
n) for large EUT (> 1,6 m), addition of the magnetic field measurement method using a 60 cm loop antenna at 3 m distance (method from CISPR 14-1) as an alternative to the 3 m and 4 m LAS.
Keywords: emission (radiated and conducted) of radiofrequency disturbance
The contents of the Interpretation Sheet 1 of November 2019 have been included in this copy.

  • Standard
    170 pages
    English language
    sale 15% off
  • Standard
    153 pages
    English and French language
    sale 15% off
IEC
IEC 62631-3-12:2024(Main)
Dielectric and resistive properties of solid insulating materials - Part 3-12: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for casting resins

IEC 62631-3-12:2024 specifies a method of test for the determination of volume resistance and volume resistivity of electrical insulation materials by applying a DC voltage. It covers casting resins described in IEC 60455-3-1, IEC 60455-3-2, IEC 60455-3-3, IEC 60455-3-4, IEC 60455-3-8 and similar products.
For other specific types of materials, other standards or the general method described in IEC 62631-3-1 can be more suitable.

  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC TR 61643-03:2024(Main)
Low-voltage surge protective devices - Part 03: SPD Testing Guide

IEC TR 61643-03:2024 applies to SPD testing in accordance with the IEC 61643-x1 series and for SPD coordination and system level immunity purposes.
It aims to provide guidance and helpful information for correct test execution and accurate interpretation of measurement results. It is also intended to further enhance repeatability and comparability throughout different test laboratories and to establish an acceptable accuracy level for the test results obtained.
The main subjects are: Test application, Test arrangement/setup, Probe application, SPD coordination testing, and System level immunity testing

  • Technical report
    56 pages
    English language
    sale 15% off