Varistors for use in electronic equipment - Part 1: Generic specification

IEC 61051-1:2007 is applicable to varistors with symmetrical voltage current characteristics for use in electronic equipment. This second edition cancels and replaces the first edition published in 1991 and constitutes a minor revision related to tables, figures and references.

Varistances utilisées dans les équipements électroniques - Partie 1: Spécification générique

La CEI 61051-1:2007 est applicable aux varistances à caractéristique tension-courant symétrique utilisées dans les équipements électroniques. Cette deuxième édition annule et remplace la première édition publiée en 1991 et constitue une révision mineure qui porte sur des tableaux, des figures et des références.

General Information

Status
Published
Publication Date
10-Apr-2007
Current Stage
DELPUB - Deleted Publication
Completion Date
29-Oct-2018
Ref Project

Relations

Buy Standard

Standard
IEC 61051-1:2007 - Varistors for use in electronic equipment - Part 1: Generic specification Released:4/11/2007 Isbn:2831890888
English language
35 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61051-1:2007 - Varistors for use in electronic equipment - Part 1: Generic specification Released:4/11/2007 Isbn:9782832201381
English and French language
70 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


INTERNATIONAL IEC
STANDARD 61051-1
QC 420000
Second edition
2007-04
Varistors for use in electronic equipment –
Part 1:
Generic specification
Reference number
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.

If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD 61051-1
QC 420000
Second edition
2007-04
Varistors for use in electronic equipment –
Part 1:
Generic specification
PRICE CODE
Commission Electrotechnique Internationale V
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 61051-1 © IEC:2007(E)
CONTENTS
FOREWORD.5

1 General .7

1.1 Scope.7

1.2 Object .7

1.3 Normative references .7

2 Technical data.8

2.1 Units, symbols and terminology .8
2.2 Terms and definitions .9
2.3 Preferred values and characteristics.13
2.4 Marking .13
2.4.1 General .13
2.4.2 Coding.14
3 Quality assessment procedures.14
3.1 Qualification approval/quality assessment systems .14
3.2 Primary stage of manufacture.14
3.3 Structurally similar components.14
3.4 Qualification approval procedures .15
3.5 Quality conformance inspection.15
3.5.1 Certified records of released lots .15
3.5.2 Delayed delivery.15
3.5.3 Release for delivery before the completion of Group B tests .16
3.6 Alternative test methods .16
3.7 Unchecked parameters.16
4 Test and measurement procedures.16
4.1 General .16
4.2 Standard atmospheric conditions.16
4.2.1 Standard atmospheric conditions for testing .16
4.2.2 Recovery conditions .17
4.2.3 Referee conditions .17
4.2.4 Reference conditions.17
4.3 Drying and recovery .17
4.4 Visual examination and check of dimensions.18

4.4.1 Visual examination .18
4.4.2 Marking .18
4.4.3 Dimensions (gauging).18
4.4.4 Dimensions (detail).18
4.5 Nominal varistor voltage or leakage current (not applicable to pulse
measurements) .
4.5.1 Test procedure .18
4.5.2 Measurement and requirements.18
4.6 Pulse current.18
4.6.1 Standard pulse currents.19
4.6.2 Tolerances .19
4.6.3 Measurement of the pulse current .19
4.7 Voltage under pulse condition .19
4.8 Capacitance .20

61051-1 © IEC:2007(E) – 3 –
4.9 Voltage proof (for insulated varistors only) .20

4.9.1 V-block method .20

4.9.2 Metal ball method .20

4.9.3 Foil method .21

4.10 Insulation resistance (for insulated varistors only) .21

4.10.1 Test procedure .21

4.10.2 Measurement and requirements.21

4.11 Robustness of terminations .22

4.11.1 General .22

4.11.2 Test Ua – Tensile .22

4.11.3 Test Ub – Bending (half of the number of terminations) .22
4.11.4 Test Uc – Torsion (other half of the number of terminations).22
4.11.5 Test Ud – Torque (for terminations with threaded studs or screws
and for integral mounting devices) .22
4.11.6 Visual examination .22
4.11.7 Final measurement .22
4.12 Resistance to soldering heat .23
4.12.1 Preconditioning.23
4.12.2 Test procedure .23
4.12.3 Recovery .23
4.12.4 Final inspection, measurement and requirements .23
4.13 Solderability .23
4.13.1 Test procedure .23
4.13.2 Final inspection, measurements and requirements .24
4.14 Rapid change of temperature .24
4.14.1 Initial measurement .24
4.14.2 Test procedure .24
4.14.3 Final inspection, measurement and requirements .24
4.15 Bump .25
4.15.1 Initial measurement .25
4.15.2 Test procedure .25
4.15.3 Final inspection, measurement and requirements .25
4.16 Shock.25
4.16.1 Initial measurement .25
4.16.2 Test procedure .25

4.16.3 Final inspection, measurement and requirements .25
4.17 Vibration.25
4.17.1 Initial measurement .25
4.17.2 Test procedure .26
4.17.3 Final inspection, measurement and requirements .26
4.18 Climatic sequence .26
4.18.1 Initial measurement .26
4.18.2 Dry heat .26
4.18.3 Damp heat, cyclic, Test Db, first cycle .26
4.18.4 Cold .26
4.18.5 Low air pressure.26
4.18.6 Damp heat, cyclic, Test Db, remaining cycles .26
4.18.7 Final inspection, measurement and requirements .27
4.19 Damp heat, steady state.27

– 4 – 61051-1 © IEC:2007(E)
4.19.1 Initial measurement .27

4.19.2 Test procedure .27

4.19.3 Final inspection, measurement and requirements .27

4.20 Fire hazard.28

4.21 Endurance at upper category temperature.28

4.22 Solvent resistance of marking.29

4.22.1 Test procedure .29

4.22.2 Requirements .29

4.23 Component solvent resistance.29

4.23.1 Initial measurements .29

4.23.2 Test procedure .
...


IEC 61051-1 ®
Edition 2.0 2007-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Varistors for use in electronic equipment –
Part 1: Generic specification
Varistances utilisées dans les équipements électroniques –
Partie 1: Spécification générique

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les

microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 61051-1 ®
Edition 2.0 2007-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Varistors for use in electronic equipment –

Part 1: Generic specification
Varistances utilisées dans les équipements électroniques –

Partie 1: Spécification générique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 31.040.99 ISBN 978-2-83220-138-1

– 2 – 61051-1  IEC:2007
CONTENTS
FOREWORD . 5

1 General . 7

1.1 Scope . 7

1.2 Object . 7

1.3 Normative references . 7

2 Technical data . 8

2.1 Units, symbols and terminology . 8
2.2 Terms and definitions . 9
2.3 Preferred values and characteristics . 13
2.4 Marking . 13
2.4.1 General . 13
2.4.2 Coding . 14
3 Quality assessment procedures . 14
3.1 Qualification approval/quality assessment systems . 14
3.2 Primary stage of manufacture . 14
3.3 Structurally similar components . 14
3.4 Qualification approval procedures . 15
3.5 Quality conformance inspection . 15
3.5.1 Certified records of released lots . 15
3.5.2 Delayed delivery . 15
3.5.3 Release for delivery before the completion of Group B tests . 16
3.6 Alternative test methods . 16
3.7 Unchecked parameters . 16
4 Test and measurement procedures . 16
4.1 General . 16
4.2 Standard atmospheric conditions . 16
4.2.1 Standard atmospheric conditions for testing . 16
4.2.2 Recovery conditions . 17
4.2.3 Referee conditions . 17
4.2.4 Reference conditions . 17
4.3 Drying and recovery . 17
4.4 Visual examination and check of dimensions . 18

4.4.1 Visual examination . 18
4.4.2 Marking . 18
4.4.3 Dimensions (gauging) . 18
4.4.4 Dimensions (detail) . 18
4.5 Nominal varistor voltage or leakage current (not applicable to pulse
measurements) . 18
4.5.1 Test procedure . 18
4.5.2 Measurement and requirements. 18
4.6 Pulse current . 18
4.6.1 Standard pulse currents . 19
4.6.2 Tolerances . 19
4.6.3 Measurement of the pulse current . 19
4.7 Voltage under pulse condition . 19
4.8 Capacitance . 20

61051-1  IEC:2007 – 3 –
4.9 Voltage proof (for insulated varistors only) . 20

4.9.1 V-block method . 20

4.9.2 Metal ball method . 20

4.9.3 Foil method . 21

4.10 Insulation resistance (for insulated varistors only) . 21

4.10.1 Test procedure . 21

4.10.2 Measurement and requirements. 21

4.11 Robustness of terminations . 22

4.11.1 General . 22

4.11.2 Test Ua – Tensile . 22

4.11.3 Test Ub – Bending (half of the number of terminations) . 22
4.11.4 Test Uc – Torsion (other half of the number of terminations) . 22
4.11.5 Test Ud – Torque (for terminations with threaded studs or screws
and for integral mounting devices) . 22
4.11.6 Visual examination . 22
4.11.7 Final measurement . 22
4.12 Resistance to soldering heat . 23
4.12.1 Preconditioning. 23
4.12.2 Test procedure . 23
4.12.3 Recovery . 23
4.12.4 Final inspection, measurement and requirements . 23
4.13 Solderability . 23
4.13.1 Test procedure . 23
4.13.2 Final inspection, measurements and requirements . 24
4.14 Rapid change of temperature . 24
4.14.1 Initial measurement . 24
4.14.2 Test procedure . 24
4.14.3 Final inspection, measurement and requirements . 24
4.15 Bump . 25
4.15.1 Initial measurement . 25
4.15.2 Test procedure . 25
4.15.3 Final inspection, measurement and requirements . 25
4.16 Shock . 25
4.16.1 Initial me
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.