CISPR TR 30-2:2012
(Main)Test method on electromagnetic emissions - Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps
Test method on electromagnetic emissions - Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps
CISPR/TR 30-2:2012(E), which is a technical report, details with the aid of reference luminaires, an independent method by which the radio disturbance characteristics of built-in electronic control gear for discharge (excluding fluorescent) lamp luminaires with protection classes I and/or II may be compared against the requirements of CISPR 15. The scope of the part is limited to electronic lamp control gear with an output power (lamp power) up to and including 150 W. Independent electronic lamp control gears are not covered by this technical report; they are within the scope of CISPR 15. This first edition of CISPR/TR 30-2 is published in conjunction with CISPR/TR 30-1. Each part of CISPR 30 series is independent and describes the test set-up for electronic control gear use together with a special lamp family.
General Information
Standards Content (Sample)
CISPR TR 30-2 ®
Edition 1.0 2012-08
INTERNATIONAL
STANDARD
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
Test method on electromagnetic emissions –
Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.
IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.
CISPR TR 30-2 ®
Edition 1.0 2012-08
INTERNATIONAL
STANDARD
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
Test method on electromagnetic emissions –
Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
L
ICS 33.100.10 ISBN 978-2-83220-311-8
– 2 – TR CISPR 30-2 © IEC:2012(E)
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Presumption of compliance . 6
4 Test method . 6
5 Reference luminaire . 7
5.1 Construction . 7
5.2 Mounting and wiring schemes. 7
5.3 Grounding . 7
5.4 Wiring. 8
6 Marking . 8
7 Guidance for luminaire design . 9
Annex A (informative) Mounting and wiring schemes . 10
Figure A.1 – Mounting and wiring schema of a reference luminaire class I for discharge
lamp(s) up to and including 150 W . 10
Figure A.2 – Mounting and wiring schema of a reference luminaire class II for
discharge lamp(s) up to and including 150 W . 11
Table 1 – Grounding connection overview for protection class I and class II
applications . 8
TR CISPR 30-2 © IEC:2012(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
TEST METHOD ON ELECTROMAGNETIC EMISSIONS –
Part 2: Electronic control gear for discharge lamps
excluding fluorescent lamps
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
CISPR 30-2, which is a technical report, has been prepared by CISPR subcommittee F:
Interference relating to household appliances tools, lighting equipment and similar apparatus.
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
CISPR/F/539/DTR CISPR/F/578/RVC
Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.
– 4 – TR CISPR 30-2 © IEC:2012(E)
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the CISPR 30 series can be found, under the general title Test method on
electromagnetic emissions, on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
TR CISPR 30-2 © IEC:2012(E) – 5 –
INTRODUCTION
Requirements to limit radio-frequency disturbances from lighting equipment are standardized
in CISPR 15. They are restricted to those kinds of lighting equipment which are considered as
finished products and intended to be placed on the market for the end user, viz. luminaires,
self-ballasted lamps and independent lamp control gear. No emission requirements apply to
components intended to be built into luminaires.
Electronic control gears for discharge lamps are also built into a number of different types of
luminaires; not only in luminaires of different manufacturers but also in different types of
luminaires of one manufacturer.
All those luminaires are tested, although disturbance data of a certain luminaire can be
predicted from other luminaire measurements equipped with the same electronic control gear
and lamps.
This has led to the question whether a worst-case test luminaire could be designed in which
the electronic control gear could be tested. In the event that this test luminaire complies with
the relevant requirements, all luminaires where that particular electronic control gear is built in
comply, and a great deal of superfluous testing can be avoided. This idea looks correct,
simple and interesting, but leads to two comments:
• a worst-case luminaire is too strict. From pre-measurements it appeared that commercial
electronic control gear did not pass some tests in a worst-case dummy luminaire, whereas
they do in real luminaires;
• even if the electronic control gear passes the tests in a worst-case luminaire, the question
remains who is responsible in case the real luminaire, where it is built in, does not comply.
The conclusion is that it is not advisable to change the basic principle of CISPR 15 that no
emission requirements apply to components built into a luminaire.
There is, however, a need for an independent test method to check the behaviour of an
electronic lamp control gear in the radiofrequency spectrum.
This first edition of CISPR/TR 30-2 is published in conjunction with CISPR/TR 30-1. Each part
of CISPR 30 series is independent and describes the test set-up for electronic control gear
use together with a special lamp family. The formatting into separately published parts
provides for ease of future amendments and revisions. Additional requirements will be added
as and when a need for them is recognised.
CISPR 30-2 is technical report for such a method, and it concerns electronic control gear for
discharge lamps excluding fluorescent lamps.
– 6 – TR CISPR 30-2 © IEC:2012(E)
TEST METHOD ON ELECTROMAGNETIC EMISSIONS –
Part 2: Electronic control gear for discharge lamps
excluding fluorescent lamps
1 Scope
This part of CISPR 30, which is a technical report, details with the aid of reference luminaires,
an independent method by which the radio disturbance characteristics of built-in electronic
control gear for discharge (excluding fluorescent) lamp luminaires with protection classes I
and/or II may be compared against the requirements of CISPR 15. The scope of the part is
limited to electronic lamp control gear with an output power (lamp power) up to and including
150 W.
Independent electronic lamp control gears are not covered by this technical report; they are
within the scope of CISPR 15.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
CISPR 15:2005, Limits and methods of measurement of radio disturbance characteristics of
electrical lighting and similar equipment
Amendment 1 (2006)
Amendment 2 (2008)
3 Presumption of compliance
The electronic lamp control gear in conjunction with the appropriate reference luminaire is
deemed to comply with the radiofrequency disturbance limits of CISPR 15 if it complies with
the terminal vo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.