IEC 61158-6:2003/COR1:2004

IEC 61158-2
(Third edition – 2003)
Digital data communications for measurement and control – Fieldbus for use in industrial control systems –

Part 2: Physical layer specification and service definition

IEC 61158-4
(Third edition – 2003)
Digital data communications for measurement and control – Fieldbus for use in industrial control systems –

Part 4: Data link protocol specification

IEC 61158-5
(Third edition – 2003)
Digital data communications for measurement and control – Fieldbus for use in industrial control systems –

Part 5: Application layer service definition

IEC 61158-6
(Third edition – 2003)
Digital data communications for measurement and control – Fieldbus for use in industrial control systems –

Part 6: Application layer protocol specification

IEC 61784-1
(First edition – 2003)
Digital data communications for measurement and control –

Part 1: Profile sets for continuous and discrete manufacturing
relative to fieldbus use in industrial control systems

CORRIGENDUM 1
IEC 61158-2:
Page 137
Replace, in 11.3.3 (Rule 8 c), "Error! ≤ MD " by "|(Z – Z )/(Z + Z )| ≤ MD ".
max fr fr max
Page 152
Replace, in 12.3.3 (Rule 8 c), "Error! ≤ 0,2" by "|(Z – Z )/(Z + Z )| ≤ 0,2".
fr fr
Page 170
Replace, in 13.3.3 (Rule 8 c), "Error! ≤ 0,2" by "|(Z – Z )/(Z + Z )| ≤ 0,2".
o o
July 2004
– 2 –
Page 181
Replace, in 14.3.3 (Rule 8 c), "Error! ≤ 0,2" by "|(Z – Z )/(Z + Z )| ≤ 0,2".
o o
Page 229
Replace, in 21.3.3 (Rule 8 c), "Error! ≤ 0,2" by "|(Z – Z )/(Z + Z )| ≤ 0,2".
o o
Page 234
Replace, in 21.8.8, "See 0" by "See 12.8.8".

IEC 61158-4:
Page 86
n-k
X + 1
Replace, in 5.1.1, in equation 5, "Error!" by " "
X + 1
Page 110
Replace, in 6.4.1.1, in paragraph "framing-overhead", "…where period = Error!" by ". where
period = "
data rate
Page 251
Replace, in 10.2.1.2 b), "…then the duration of this timer should be Error!; otherwise the duration
V (NP).MCD_CRS
C
should be Error!." by "…then the duration of this timer should be ; otherwise the
V(NRC)+1
60 s
duration should be ."
V(NRC)+1
Page 279
Replace, in 10.2.2.9 b), "…then the duration of this timer should be; otherwise the duration should
V (NP).MCD_CRS
C
be Error!." by "…then the duration of this timer should be ; otherwise the duration
V(NRC)+1
60 s
should be ."
V(NRC)+1
Page 280
Replace, in 10.2.2.11, second paragraph, "…between 25 % and 50 % of Error!; otherwise the
duration should be between 25 % and 50 % of Error!." by "…between 25 % and 50 % of
V (NP).MCD_D
C 60 s
; otherwise the duration should be between 25 % and 50 % of  ."
V(NRC)+2 V(NRC)+2
July 2004
– 3 –
Page 281
Replace, in 10.2.2.11.1, second indent, "…between 25 % and 50 % of Error!; otherwise the

duration should be between 25 % and 50 % of Error!." by “…between 25 % and 50 % of

V (NP).MCD_D
C 60 s
; otherwise the duration should be between 25 % and 50 % of  ."

V(NRC)+2 V(NRC)+2
Replace, in 10.2.2.12, second paragraph, "…between 25 % and 50 % of Error!; otherwise the

duration should be between 25 % and 50 % of Error!." by "…between 25 % and 50 % of

V (NP).MCD_D
C 60 s
; otherwise the duration should be between 25 % and 50 % of  ."

V(NRC)+2 V(NRC)+2
Page 282
Replace, in 10.2.2.13, second paragraph, ".between 70 % and 95 % of Error!; otherwise the
duration should be between 70 % and 95 % of Error!." by "…between 70 % and 95 % of
V (NP).MCD_CRS
C 60 s
; otherwise the duration should be between 70 % and 95 % of  ."
V(NRC)+2 V(NRC)+2
Page 286
Replace, in 10.2.2.19 c), "…this timer should be Error!; otherwise the duration should be Error!."
V (NP).MCD_CRS
C 60 s
by ".this timer should be ; otherwise the duration should be ."
V(NRC)+1 V(NRC)+1
Page 287
Replace, in 10.2.3.1 b), "…this timer should be Error!; otherwise, the duration should be Error!."
V (NP).MCD_CRS
C 60 s
by ".this timer should be ; otherwise, the duration should be ."
V(NRC)+1 V(NRC)+1
Page 299
Replace,
...