Equipment for general lighting purposes - EMC immunity requirements - Part 1: An objective voltage fluctuation immunity test method

IEC TR 61547-1:2015(E) establishes an objective method and procedure for testing the immunity performance of lighting equipment against voltage fluctuation disturbances on the a.c. power port. The object of this Technical Report is to establish a common and objective reference for evaluating the immunity of lighting equipment in terms of illuminance flicker when subjected to mains voltage fluctuations. Temporal changes in the colour of the light (chromatic flicker) are not considered in this test.

General Information

Status
Published
Publication Date
28-Apr-2015
Technical Committee
Current Stage
DELPUB - Deleted Publication
Start Date
31-Mar-2017
Completion Date
19-Oct-2017
Ref Project

Relations

Buy Standard

Technical report
IEC TR 61547-1:2015 - Equipment for general lighting purposes - EMC immunity requirements - Part 1: An objective voltage fluctuation immunity test method Released:4/29/2015 Isbn:9782832226490
English language
36 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC TR 61547-1 ®
Edition 1.0 2015-04
TECHNICAL
REPORT
colour
inside
Equipment for general lighting purposes – EMC immunity requirements –
Part 1: An objective voltage fluctuation immunity test method

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC TR 61547-1 ®
Edition 1.0 2015-04
TECHNICAL
REPORT
colour
inside
Equipment for general lighting purposes – EMC immunity requirements –

Part 1: An objective voltage fluctuation immunity test method

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.140.20 ISBN 978-2-8322-2649-0

– 2 – IEC TR 61547-1:2015 © IEC 2015
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, abbreviations and symbols . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 9
3.3 Symbols . 9
4 General . 10
5 Voltage fluctuation disturbance signal . 10
5.1 General . 10
5.2 Mains signal parameters . 12
5.3 Disturbance signal parameters and test levels . 13
6 Test setup and equipment . 14
6.1 General . 14
6.2 Test voltage . 14
6.3 Optical test environment . 15
6.4 Light sensor and amplifier . 15
6.5 Signals to be measured . 15
6.6 Signal processing . 16
6.6.1 Anti-aliasing filter . 16
6.6.2 Sampling frequency . 16
6.6.3 Signal resolution . 18
7 Verification procedure . 18
7.1 General . 18
7.2 Light flickermeter . 18
7.3 Mains voltage parameters without modulation . 18
7.3.1 Nominal voltage level . 18
7.3.2 Mains frequency . 19
7.4 Voltage fluctuation level . 19
7.4.1 General . 19
7.4.2 Option 1: measure the actual modulation frequencies and voltage levels . 19
7.4.3 Option 2: measure P -values using a flickermeter . 19
st
7.5 Light sensor and amplifier . 19
7.6 Test environment . 20
7.7 Light flicker noise . 20
8 Test procedure . 20
9 Conditions during testing . 20
10 Evaluation of the test result . 21
11 Test report . 21
Annex A (informative) Specification of the light flickermeter . 23
A.1 The voltage flickermeter . 23
A.2 Specification of the light flickermeter . 24
A.2.1 General . 24
A.2.2 Block a: illuminance adapter . 24

A.2.3 Block b: weighting filters . 24
A.2.4 Block c: squaring multiplier, sliding mean filter and scaling . 25
A.2.5 Block d: statistical analysis . 25
A.3 Verification of the light flickermeter . 26
Annex B (informative) Uncertainty considerations . 27
B.1 General . 27
B.2 General symbols . 27
B.3 Measurand . 27
B.4 Influence quantities . 27
B.5 Uncertainty budget . 29
B.6 Reference document . 29
Annex C (informative) Examples of a test result . 31
C.1 EUTs . 31
C.2 Recorded signals . 31
C.3 Results . 34
Bibliography . 36

Figure 1 – The full EMC approach for mains voltage fluctuations . 11
Figure 2 – Definition of the mains test signal including a rectangular modulated
voltage fluctuation (see Equation (1)) . 12
Figure 3 – Block diagram voltage-fluctuation immunity test . 14
Figure 4 – Example of a recorded mains voltage fluctuation and illuminance signal of a
60 W incandescent lamp . 17
Figure A.1 –Structure of the IEC 61000-4-15 flickermeter which uses voltage as input . 23
Figure A.2 – Structure of the light flickermeter . 23
Figure C.1 – EUT1: recorded signals (no mains voltage modulation) . 32
Figure C.2 – EUT1: recorded signals (with modulation) . 33
Figure C.3 – EUT2: relative illuminance: mains voltage modulation d = 0,407 % at
13,5 Hz (P = 1) . 34
st
Figure C.4 – EUT3: relative illuminance: mains voltage modulation d = 0,407 % at
13,5 Hz (P = 1) . 34
st
Figure C.5 – Graphical P results for three EUTs with rectangular modulation at five
st
frequencies (P = 1) . 35
st
Table 1 – Voltage fluctuations – Test specification of voltage fluctuations applied at
input a.c. power ports 230 V; 50 Hz . 13
Table A.1 – Test specification of illuminance fluctuations for lightmeter classifier . 26
Table B.1 – P influence quantities and their recommended tolerances. 28
st
Table B.2 – Uncertainty budget of the voltage fluctuation immunity test . 30
Table C.1 – Numerical results P calculations for three EUTs with and without
st
modulation . 35

– 4 – IEC TR 61547-1:2015 © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
EQUIPMENT FOR GENERAL LIGHTING PURPOSES –
EMC IMMUNITY REQUIREMENTS –
Part 1: An objective voltage fluctuation immunity test method

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. Internat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.