IEC 60092-504:2001/COR1:2011
(Corrigendum)Corrigendum 1 - Electrical installations in ships - Part 504: Special features - Control and instrumentation
Corrigendum 1 - Electrical installations in ships - Part 504: Special features - Control and instrumentation
General Information
Relations
Standards Content (Sample)
IEC 60092-504
(Third edition – 2001)
Electrical installations in ships –
Part 504: Special features – Control and instrumentation
CORRIGENDUM 1
5 Environmental type testing parameters
Re
...
This May Also Interest You
IEC/IEEE 80005-3:2025 specifies provisions for the design, installation and testing of low-voltage shore connection (LVSC) systems, onboard ships and on shore, to supply the ship with electrical power from shore.
This document is applicable to:
- ships requiring up to 1 MVA while at berth;
- three-phase shore connection systems rated 250 A and above, and with a nominal voltage rating of 400 V AC to 1 000 V AC;
- shore-side connection systems;
- shore-to-ship connection and interface equipment;
- transformers and reactors;
- semiconductor and rotating frequency convertors;
- ship-side connection systems;
- protection, control, monitoring, interlocking and power management systems.
This document does not apply to:
- inland navigation vessels;
- high-voltage shore connection systems, including ships built in accordance with the annexes of IEC/IEEE 80005-1;
- the electrical power supply during docking periods, for example dry docking and other out-of-service maintenance and repair;
- systems to be operated by ordinary persons as defined in 3.19.
- Standard47 pagesEnglish languagesale 15% off
IEC 60092-302-2:2025 defines the specific requirements of low voltage marine power switchgear and controlgear assemblies (mpsc-assemblies) as follows:
- stationary assemblies with enclosure for which the rated voltage does not exceed 1 000 V AC or 1500 V DC;
- assemblies intended for use in conjunction with the power generation, distribution and conversion of electric energy, and for the control of electric energy consuming equipment.
Due to the marine application and the risks associated with loss of power, additional safety factors have been applied to minimise the risk of failure, such as applying an additional safety factor on clearance distances.
This document applies to all assemblies whether they are designed, manufactured and verified on a one-off basis or fully standardised and manufactured in quantity.
Either the manufacture or assembly, or both, of the MPSC assembly can be carried out by others than the original manufacturer.
This document does not apply to individual devices and self-contained components, such as motor starters, fuse switches, electronic equipment, which comply with the relevant product standards.
This second edition cancels and replaces the first edition published in 2019. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) amended and updated in line with, and correctly referenced to the updated clauses of IEC 61439-1:2020 and IEC 61439-2:2020;
b) explanation of the need to special consideration for marine applications added;
c) Figure 201 updated;
d) adjustment has been made to the "safety factors" for creepage and clearance distances.
- Standard56 pagesEnglish languagesale 15% off
IEC 60092-501:2025 applies to electric propulsion plants and specifies system design, installation and testing for equipment such as:
- generators and their prime movers or other power sources (fuel cell, battery, …);
- switchboards;
-transformers/reactors;
- semiconductor converters;
- propulsion motors;
- excitation systems;
- control, monitoring and safety systems;
- wires, cables, busbars or trunking systems;
- podded drives including azimuth.
Thrusters intended either as auxiliary steering or auxiliary propulsion devices or both and booster equipment are excluded.
This sixth edition cancels and replaces the fifth edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of podded drives including azimuth in the scope;
b) addition of alternative power sources;
c) modification of the special requirements for ships with only one propulsion motor;
d) new definition for test of slip ring units;
e) modification of Figure 2 and description;
f) addition of a description of power management functions;
g) addition of emergency stop at control stations;
h) clearer start blockings;
i) deletion of Table A.2, Table A.3 and Table A.4 in Annex A. Their content has been moved to Table 1.
- Standard44 pagesEnglish languagesale 15% off
IEC/IEEE 61886-2:2025 is applicable to three-phase and single-phase liquid immersed subsea power transformers (including auto-transformers) with at least one winding with rated voltages in the range 3,6 ≤ Um ≤ 245 kV and with rated power in the range 50 kVA to 300 MVA. The intention is to specify additional requirements that are not covered by the IEC 60076 series and IEEE Std C57.12TM series.
This document is published as an IEC/IEEE Dual Logo standard.
This publication contains attached files in the form of a Microsoft Excel file. This file is intended to be used as a complement and does not form an integral part of the publication.
- Standard52 pagesEnglish languagesale 15% off
IEC 60092-301:2025 is applicable to all rotating electrical machines rated at 750 W or more for use in ships. It also applies to excitation machines and includes relevant requirements for prime mover driving generators. This fourth edition cancels and replaces the third edition published in 1980, Amendment 1:1994 and Amendment 2:1995. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) services conditions were added;
b) IEC 60034‑1:2022, has been considered.
- Standard14 pagesEnglish languagesale 15% off
- Standard9 pagesEnglish languagesale 15% off
IEC 60092-303:2023 is applicable to all transformers used for power and lighting and, where appropriate, to static convertors, starting transformers, static balancers, earthing transformers, saturable reactors and transductors for use in ships, including single-phase transformers rated higher than 1 kVA, and three-phase transformers rated higher than 5 kVA, unless special requirements are specified. This document applies to transformers with rated voltage up to and including 36 kV.
This fourth edition cancels and replaces the third edition published in 1980 and Amendment 1:1997. This edition includes the following significant technical changes with respect to the previous edition:
- environmental conditions,
- load harmonic currents,
- Transformers for special applications,
- design and construction,
- transformers for essentials services.
- Standard13 pagesEnglish languagesale 15% off
IEC 60092-306:2022 applies to luminaires and lighting accessories for use in ships. It applies primarily to luminaires for illumination purposes. This document also applies to lighting accessories associated with the wiring and current consuming appliance of an installation. This document does not apply to portable luminaires, navigation lights, search lights, daylight signalling lamps, signal lights including the relevant control and monitoring equipment and other lights used for navigation in channels, harbours, etc. Annex A provides EMC considerations for system integrators.
- Standard22 pagesEnglish languagesale 15% off
- Standard47 pagesEnglish languagesale 15% off
IEC 60092-304:2022 specifies special provisions to power electronic converters and systems, using semiconductor elements for use in ships. The conversion may be from AC to DC, from DC to AC, from DC to DC or from AC to AC with a rated output power greater than 1 kW.
This document does not apply to semiconductor converters used in electrical propulsion plant. For semiconductors converters used in electrical propulsion plant, see IEC 60092-501.
- Standard13 pagesEnglish languagesale 15% off
- Standard7 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...