Configurable car infotainment services (CCIS) - Part 2: Requirements

This part of IEC 63246 specifies the CCIS requirements, which include the general, functional and service requirements for CCIS.

Konfigurierbare Fahrzeug-Infotainment-Dienste (CCIS) - Teil 2: Anforderungen

Services d'infodivertissements configurables pour les véhicules (CCIS) - Partie 2 : Exigences

L'IEC 63246-2:2022 spécifie les exigences relatives au CCIS, qui incluent les exigences générales, fonctionnelles et de service du CCIS.

Nastavljiva avtomobilska informacijska vzdrževalna storitev (CCIS) - 2. del: Zahteve (IEC 63246-2:2022)

General Information

Status
Published
Publication Date
03-Mar-2022
Current Stage
6060 - Document made available - Publishing
Start Date
04-Mar-2022
Completion Date
04-Mar-2022

Buy Standard

Standard
EN IEC 63246-2:2022
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2022
Nastavljiva avtomobilska informacijska vzdrževalna storitev (CCIS) - 2. del:
Zahteve (IEC 63246-2:2022)
Configurable car infotainment services (CCIS) - Part 2: Requirements (IEC 63246-
2:2022)
Konfigurierbare Fahrzeug Informationsdienste (CCIS) - Teil 2: Anforderungen (IEC 63246
-2:2022)
Services d'infodivertissements configurables pour les véhicules (CCIS) - Partie 2 :
Exigences (IEC 63246-2:2022)
Ta slovenski standard je istoveten z: EN IEC 63246-2:2022
ICS:
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63246-2

NORME EUROPÉENNE
EUROPÄISCHE NORM March 2022
ICS 33.160.99; 43.040.15
English Version
Configurable car infotainment services (CCIS) - Part 2:
Requirements
(IEC 63246-2:2022)
Services d'infodivertissements configurables pour les Konfigurierbare Fahrzeug Informationsdienste (CCIS) - Teil
véhicules (CCIS) - Partie 2 : Exigences 2: Anforderungen
(IEC 63246-2:2022) (IEC 63246-2:2022)
This European Standard was approved by CENELEC on 2022-03-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63246-2:2022 E

European foreword
The text of document 100/3508/CDV, future edition 1 of IEC 63246-2, prepared by IEC/TC 100 "Audio,
video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63246-2:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-12-03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-03-03
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63246-2:2022 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 63246-1 - Configurable car infotainment services EN IEC 63246-1 -
(CCIS) - Part 1: General
IEC 63246-2 ®
Edition 1.0 2022-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Configurable car infotainment services (CCIS) –

Part 2: Requirements
Services d'infodivertissements configurables pour les véhicules (CCIS) –

Partie 2: Exigences
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.160.99; 43.040.15 ISBN 978-2-8322-1070-8

– 2 – IEC 63246-2:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General requirements . 6
4.1 General . 6
4.2 User registration and deregistration . 6
4.3 Device registration and deregistration . 7
4.4 Profile management . 7
4.5 Service provisioning according to authority . 7
4.6 Device monitoring . 7
4.7 Device control . 7
4.8 Content delivery . 7
5 Functional requirements for functional entity . 7
5.1 General . 7
5.2 CCIS user . 8
5.2.1 General . 8
5.2.2 Registration and deregistration . 8
5.2.3 Authentication and authorization . 8
5.2.4 Device control. 9
5.2.5 Content delivery . 9
5.3 CCIS device . 9
5.3.1 General . 9
5.3.2 Registration and deregistration . 9
5.3.3 Status report . 9
5.3.4 Interaction for device control. 9
5.3.5 Interaction for content delivery . 9
5.4 CCIS master . 10
5.4.1 General . 10
5.4.2 Registration of CCIS users . 10
5.4.3 Device registration . 10
5.4.4 Device control. 10
5.4.5 Device monitoring . 10
5.4.6 Content delivery . 10
6 Service requirements for CCIS users . 11
6.1 General . 11
6.2 Car owner . 11
6.3 Temporary owner . 11
6.4 Private client . 11
6.5 Public client . 11
7 Security requirements . 11
Bibliography . 13

Table 1 – CCIS functions required for CCIS entities . 8
Table 2 – Security requirements for CCIS functions . 12

IEC 63246-2:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONFIGURABLE CAR INFOTAINMENT SERVICES (CCIS) –

Part 2: Requirements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.