EN 80416-1:2009

SLOVENSKI STANDARD
01-april-2009
1DGRPHãþD
SIST EN 80416-1:2004
2VQRYQDQDþHODJUDILþQLKVLPERORY]DUDERQDRSUHPLGHO2EOLNRYDQMH
JUDILþQLKVLPERORY]DUHJLVWUDFLMR,(&
Basic principles for graphical symbols for use on equipment - Part 1: Creation of
graphical symbols for registration (IEC 80416-1:2008)
Allgemeine Grundlagen für Graphische Symbole auf Geräten und Einrichtungen - Teil 1:
Gestaltung Graphischer Symbole für die Registrierung (IEC 80416-1:2008)
Principes de base pour les symboles graphiques utilisables sur le matériel - Partie 1:
Création des symboles graphiques pour enregistrement (CEI 80416-1:2008)
Ta slovenski standard je istoveten z: EN 80416-1:2009
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 80416-1
NORME EUROPÉENNE
February 2009
EUROPÄISCHE NORM
ICS 01.080.01 Supersedes EN 80416-1:2001

English version
Basic principles for graphical symbols for use on equipment -
Part 1: Creation of graphical symbols for registration
(IEC 80416-1:2008)
Principes de base  Allgemeine Grundlagen
pour les symboles graphiques für Graphische Symbole
utilisables sur le matériel - auf Geräten und Einrichtungen -
Partie 1: Création des symboles Teil 1: Gestaltung Graphischer Symbole
graphiques pour enregistrement für die Registrierung
(CEI 80416-1:2008) (IEC 80416-1:2008)

This European Standard was approved by CENELEC on 2009-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 80416-1:2009 E
Foreword
The text of document 3C/1590/FDIS, future edition 2 of IEC 80416-1, prepared by SC 3C, Graphical
symbols for use on equipment, of IEC TC 3, Information structures, documentation and graphical
symbols, in cooperation with ISO/TC 145/SC 3, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 80416-1 on 2009-02-01.
This European Standard supersedes EN 80416-1:2001.
– Clause 8 in EN 80416-1:2001 is moved to Clause 4;
– mandatory requirement for the line width in symbol originals is changed to 2 mm or 4 mm (see
th
6 paragraph of 7.3);
– for negation of a graphical symbol, a single diagonal bar is allowed in addition to two diagonal bars
at right angles;
– a new meaning of negation “do not” is allowed;
– some freedom is given for use of the basic pattern such as for symbol originals to be within the
75 mm square instead of the octagon;
– Annex A (normative) is newly introduced for provisions on title, description and notes;
– the nature of notes is changed to be purely informative; and
– Clause 10 in EN 80416-1:2001 is moved to Annex C (informative).
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 80416-1:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60027 NOTE  Harmonized in EN 60027 series (not modified).
IEC 80416-3 NOTE  Harmonized as EN 80416-3:2002 (not modified).
ISO 31 NOTE  ISO 80000 and IEC 80000 are being harmonized by CEN and CENELEC.
ISO 3098 NOTE  Harmonized in EN ISO 3098 series (not modified).
ISO 81714-1 NOTE  Harmonized as EN ISO 81714-1:1999 (not modified).
__________
– 3 – EN 80416-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60417 Data- Graphical symbols for use on equipment - -
base
1)
ISO/IEC Guide 71 - Guidelines for standards developers to - -
address the needs of older persons and
persons with disabilities
1)
ISO/IEC Guide 74 - Graphical symbols - Technical guidelines - -
for the consideration of consumers' needs

1)
ISO 7000 - Graphical symbols for use on equipment - - -
Index and synopsis
1) 2)
ISO/IEC 80416-2 - Basic principles for graphical symbols for EN 80416-2 2001
use on equipment -
Part 2: Form and use of arrows

1)
Undated reference.
2)
Valid edition at date of issue.

IEC 80416-1
Edition 2.0 2008-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Basic principles for graphical symbols for use on equipment –
Part 1: Creation of graphical symbols for registration

Principes de base pour les symboles graphiques utilisables sur le matériel –
Partie 1: Création des symboles graphiques pour enregistrement

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
S
CODE PRIX
ICS 01.080.01 ISBN 2-8318-1013-8

– 2 – 80416-1 © IEC:2008
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms and definitions .7
4 Creation procedures .8
5 Meaning .8
5.1 Assignment .8
5.2 Orientation of the graphical symbols.8
6 Combination of graphical symbols .9
7 Creation principles .9
7.1 Creation of symbol original .9
7.2 Design guidelines.10
7.3 Line width.10
7.4 Spacing.11
7.5 Angles.11
7.6 Filled areas .11
7.7 Symbol original with arrows.12
7.8 Characters as symbol elements.12
7.9 Negation .12
7.9.1 Methods of negation .12
7.9.2 Angle of negation .12
7.9.3 Meaning of negation .12
7.9.4 Negation as prohibition.12
8 Basic pattern .13
8.1 Structure .13
8.2 Application of the basic pattern .13
8.3 Specification of symbol original .14
Annex A (normative) Title, description and notes .16
Annex B (informative) Guidance for the wording of the description for a symbol original .18
Annex C (informative) Designation systems .21
Bibliography.22

Figure 1 – Graphical symbols in different orientation.9
Figure 2 – Example of combination of graphical symbols (IEC 60417-5049: “Television”
combined with IEC 60417-5048: “Colour” to give IEC 60417-5050: “Colour television”).9
Figure 3 – Basic pattern.10
Figure 4 – Examples of the use of line width .11
Figure 5 – Examples of negation.12
Figure 6 – Example of non-permitted line beyond the basic pattern.13
Figure 7 – Application examples .14
Figure 8 – Example of the graphical symbol.15

80416-1 © IEC:2008 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
BASIC PRINCIPLES FOR GRAPHICAL
SYMBOLS FOR USE ON EQUIPMENT –

Part 1: Creation of graphical symbols for registration

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure
...