EN 60384-15:2017

SLOVENSKI STANDARD
01-november-2017
)LNVQLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLRSUHPLGHO3RGURþQD
VSHFLILNDFLMD)LNVQLWDQWDOVNLNRQGHQ]DWRUMLVWHNRþLPDOLWUGQLPHOHNWUROLWRP,(&

Fixed capacitors for use in electronic equipment - Part 15: Sectional specification - Fixed
tantalum capacitors with non-solid or solid electrolyte (IEC 60384-15:2017)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 15:
Spécification intermédiaire - Condensateurs fixes au tantale, à électrolyte non solide ou
solide (IEC 60384-15:2017)
Ta slovenski standard je istoveten z: EN 60384-15:2017
ICS:
31.060.40 Tantalski elektrolitni Tantalum electrolytic
kondenzatorji capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60384-15

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2017
ICS 31.060.40
English Version
Fixed capacitors for use in electronic equipment -
Part 15: Sectional specification: Fixed tantalum capacitors with
non-solid or solid electrolyte
(IEC 60384-15:2017)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 15: Spécification intermédiaire - Elektronik - Teil 15: Rahmenspezifikation - Tantal-Elektrolyt-
Condensateurs fixes au tantale, à électrolyte non solide ou Kondensatoren mit flüssigem oder festem Elektrolyten
solide (IEC 60384-15:2017)
(IEC 60384-15:2017)
This European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60384-15:2017 E
European foreword
The text of document 40/2523/FDIS, future edition 2 of IEC 60384-15, prepared by
IEC/TC 40 "Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60384-15:2017.

The following dates are fixed:
(dop) 2018-03-26
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-06-26
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60384-15:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60068-2-54:2006 NOTE Harmonized as EN 60068-2-54:2006 (not modified).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year

IEC 60063 -  Preferred number series for resistors EN 60063 -
and capacitors
IEC 60068-1 2013 Environmental testing - EN 60068-1 2014
Part 1: General and guidance
IEC 60068-2-6 -  Environmental testing - EN 60068-2-6 -
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60068-2-14 -  Environmental testing - EN 60068-2-14 -
Part 2-14: Tests - Test N: Change of
temperature
IEC 60384-1 2016 Fixed capacitors for use in electronic EN 60384-1 2016
equipment -
Part 1: Generic specification
IEC 60417-DB -  Graphical symbols for use on equipment - -
IEC 61193-2 2007 Quality assessment systems - EN 61193-2 2007
Part 2: Selection and use of sampling
plans for inspection of electronic
components and packages
ISO 3 -  Preferred numbers - Series of preferred - -
numbers
IEC 60384-15 ®
Edition 2.0 2017-05
INTERNATIONAL
STANDARD
Fixed capacitors for use in electronic equipment –

Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or

solid electrolyte
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.060.40 ISBN 978-2-8322-4319-0

– 2 – IEC 60384-15:2017 © IEC 2017
CONTENTS
FOREWORD . 5
1 General . 7
1.1 Scope . 7
1.2 Object . 7
1.3 Normative references . 7
1.4 Information to be given in a detail specification . 8
1.4.1 General . 8
1.4.2 Outline drawing and dimensions . 8
1.4.3 Mounting . 8
1.4.4 Ratings and characteristics . 8
1.4.5 Marking . 9
1.5 Terms and definitions . 9
1.6 Marking . 9
1.6.1 General . 9
1.6.2 Information for marking . 10
1.6.3 Marking on capacitors . 10
1.6.4 Marking on packaging . 10
2 Preferred ratings and characteristics . 10
2.1 Preferred characteristics . 10
2.2 Preferred values of ratings . 10
2.2.1 Nominal capacitance (C ) . 10
N
2.2.2 Tolerance on nominal capacitance . 11
2.2.3 Rated voltage (U ) . 11
R
2.2.4 Category voltage (U ). 11
C
2.2.5 Reverse voltage . 11
2.2.6 Surge voltage (U or U ) . 11
RS CS
2.2.7 Ripple (if required) . 11
2.2.8 Rated temperature . 12
3 Quality assessment procedures . 12
3.1 Primary stage of manufacture . 12
3.2 Structurally similar components . 12
3.3 Certified test records of released lots . 12
3.4 Qualification approval procedures . 12
3.4.1 General . 12
3.4.2 Qualification approval on the basis of the fixed sample size procedure . 12
3.4.3 Tests . 13
3.5 Quality conformance inspection . 20
3.5.1 Formation of inspection lots . 20
3.5.2 Test schedule . 21
3.5.3 Delayed delivery . 21
3.5.4 Assessment levels . 21
4 Test and measurement procedures . 22
4.1 Visual inspection and check of dimensions . 22
4.2 Electrical tests . 22
4.2.1 Leakage current . 22
4.2.2 Capacitance . 22
4.2.3 Tangent of loss angle (tan δ) . 23

IEC 60384-15:2017 © IEC 2017 – 3 –
4.2.4 Impedance (if required) . 23
4.2.5 Insulation resistance of the external insulation (if required) . 24
4.2.6 Voltage proof of the external insulation (if required) . 24
4.3 Robustness of terminations . 25
4.3.1 General . 25
4.3.2 Initial inspection. 25
4.3.3 Test Ua1, Ub and Uc applicable. 25
4.3.4 Special bending test . 25
4.4 Resistance to soldering heat . 26
4.4.1 General . 26
4.4.2 Conditions . 26
4.4.3 Final inspections and requirements . 26
4.5 Solderability . 26
4.5.1 General . 26
4.5.2 Test conditions . 26
4.5.3 Final inspections and requirements . 26
4.6 Rapid change of temperature . 26
4.6.1 General . 26
4.6.2 Initial inspection.
...