EN IEC 60352-9:2024
(Main)Solderless connections - Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance
Solderless connections - Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance
IEC 60352-9:2024 provides guidelines for welding and testing of ultrasonically welded connections and includes requirements, tests and practical guidance information. Ultrasonic welding is a form of cold friction welding that is becoming increasingly popular in many industries. This type of welding uses ultrasonic vibration to join materials together, creating a bond that is both strong and reliable. Ultrasonic welding has been identified as a process in ISO 4063-41 by the International Organization for Standardization (ISO). The process of ultrasonic welding relies on high frequency ultrasound waves being used to create frictional heat at the connection point. High temperature is not required for this special method of welding, making it one of the most cost-effective ways to join two materials together. It also requires fewer steps than traditional methods, meaning it can be completed quickly and with minimal resources. Ultrasonic welding has been around for decades but only recently has become more widely utilized due to advances in technology and its availability at lower cost. It can be used on many different materials including plastics, rubbers, metals, textiles, and composites. Due to its precision and strong bonds it creates, it has become extremely popular in manufacturing processes such as automotive industry, electronics industry, furniture production and even medical device production. This document covers ultrasonically welded connections made with stranded or flexible wires (class 2, 5 or 6 per IEC 60228) of copper or copper alloy, as well as of aluminium or aluminium alloy. These welded metal-to-metal connections shall employ wires with cross-sectional area of 0,08 mm2 to 160 mm2 and shall not exceed a total cross-sectional area, in case of wire bundle, of 200 mm2. For aluminium or aluminium alloy wires, the minimum required cross-sectional area is 2,5 mm2. Additionally, information on materials, data from industrial experience and test procedures are included to ensure electrically stable connections under prescribed environmental conditions. Lastly, this document aims to achieve comparable results when using ultrasonic welding equipment with similar performance and specifications as specified by the termination manufacturer.
Lötfreie Verbindungen - Teil 9: Ultraschallgeschweißte Verbindungen - Allgemeine Anforderungen, Prüfverfahren und praktische Hinweise
Connexions sans soudure - Partie 9: Connexions soudées par ultrasons - Exigences générales, méthodes d’essai et guide pratique
IEC 60352-9:2024 couvre les connexions soudées par ultrasons et inclut des informations sur les exigences, les essais et les recommandations pratiques. Le soudage par ultrasons est une forme de soudage par friction à froid qui est de plus en plus répandue dans de nombreux secteurs d’activité. Ce type de soudage utilise des vibrations ultrasoniques pour joindre les matériaux entre eux, en créant une liaison à la fois résistante et fiable. Le soudage par ultrasons a été identifié par l’Organisation internationale de normalisation (ISO) comme un procédé dans l’ISO 4063-41. Le procédé de soudage par ultrasons s’appuie sur les ondes ultrasoniques haute fréquence utilisées pour générer une chaleur de friction au point de connexion. Il n’est pas exigé de température élevée pour cette méthode de soudage particulière, ce qui en fait l’une des façons les plus économiques de solidariser deux matériaux. Ce procédé exige également moins d’étapes que les méthodes conventionnelles, ce qui signifie qu’il peut être achevé rapidement et en sollicitant un minimum de ressources. Le soudage par ultrasons existe depuis des décennies, mais ce n’est que récemment que son usage est devenu plus répandu, en raison des avancées technologiques du procédé et de sa disponibilité à moindre coût. Il peut être utilisé sur de nombreux matériaux, comprenant les plastiques, les caoutchoucs, les métaux, les textiles et les matériaux composites. En raison de sa précision et de la résistance des liaisons qu’il définit, il est devenu extrêmement répandu dans les procédés de fabrication tels que ceux de l’industrie automobile, de l’électronique, de la fabrication de mobilier et même de la fabrication de dispositifs médicaux. Le présent document couvre les connexions soudées par ultrasons effectuées avec des fils toronnés ou souples (de classe 2, 5 ou 6 conformément à l’IEC 60228) en cuivre ou en alliage de cuivre, ainsi qu’en aluminium ou en alliage d’aluminium. Ces connexions métal-métal soudées doivent utiliser des fils dont la section transversale est de 0,08 mm2 à 160 mm2 et ne doivent pas dépasser une section totale de 200 mm2 dans le cas d’un faisceau de fils. Pour les fils en aluminium ou en alliage d’aluminium, la section minimale exigée est de 2,5 mm2. En outre, des informations sur les matériaux, des données issues de l’expérience industrielle et des procédures d’essai sont incluses, afin d’assurer des connexions électriquement stables dans les conditions d’environnement prescrites. Enfin, le présent document vise à obtenir des résultats comparables lorsque des équipements de soudage par ultrasons offrant des performances et des spécifications similaires à celles spécifiées par le fabricant de sorties sont utilisés.
Spoji brez spajke - 9. del: Ultrazvočno varjeni priključki - Splošne zahteve, preskusne metode in praktični napotki (IEC 60352-9:2024)
Standard IEC 60352-9:2024 podaja smernice za varjenje in preskušanje ultrazvočno varjenih priključkov ter vključuje informacije o zahtevah, preskusih in praktičnih napotkih.
Ultrazvočno varjenje je oblika hladnega varjenja s trenjem, ki postaja vse bolj priljubljeno v številnih panogah. Pri tej vrsti varjenja se za spajanje materialov uporabljajo ultrazvočne vibracije, s čimer se ustvari močen in zanesljiv spoj. Mednarodna organizacija za standardizacijo (ISO) je postopek ultrazvočnega varjenja opredelila v standardu ISO 4063-41.
Ta postopek temelji na uporabi visokofrekvenčnih ultrazvočnih valov za ustvarjanje torne toplote na stični točki. Pri tej posebni metodi varjenja visoka temperatura ni potrebna, zato je to eden stroškovno najučinkovitejših načinov spajanja dveh materialov.
Zajema tudi manj korakov kot tradicionalne metode, zaradi česar jo je mogoče izvesti hitro in z minimalno uporabo virov.
Ultrazvočno varjenje se uporablja že desetletja, vendar je zaradi napredka v tehnologiji in dostopnosti po nižji ceni v zadnjem času postalo bolj razširjeno. Uporabljati ga je mogoče za različne materiale, vključno s plastiko, gumo, kovino, tekstilom in kompoziti. Zaradi svoje natančnosti in močnih spojev, ki jih ustvarja, je postalo izjemno priljubljeno v proizvodnih procesih, kot so avtomobilska industrija, elektronska industrija, proizvodnja pohištva in celo proizvodnja medicinskih pripomočkov.
Ta dokument zajema ultrazvočno varjene priključke, izdelane iz pramenastih ali gibkih žic (razred 2, 5 ali 6 v skladu s standardom IEC 60228) iz bakra ali bakrove zlitine in iz aluminija ali aluminijeve zlitine. V teh varjenih kovinsko-kovinskih spojih je treba uporabiti žice s površino prečnega prereza od 0,08 m2 do 160 mm2, pri čemer ne smejo presegati skupne površine prečnega prereza 200 mm2 (v primeru snopa žic). Najmanjša določena površina prečnega prereza žic iz aluminija ali aluminijeve zlitine je 2,5 mm2.
Vključeni so tudi informacije o materialih, podatki o industrijskih izkušnjah in preskusni postopki, ki zagotavljajo električno stabilne spoje v predpisanih okoljskih pogojih.
Cilj tega dokumenta je doseči primerljive rezultate pri uporabi opreme za ultrazvočno varjenje s podobno zmogljivostjo in specifikacijami, kot jih je določil proizvajalec zaključkov.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Spoji brez spajke - 9. del: Ultrazvočno varjeni priključki - Splošne zahteve,
preskusne metode in praktični napotki (IEC 60352-9:2024)
Solderless connections - Part 9: Ultrasonically welded connections - General
requirements, test methods and practical guidance (IEC 60352-9:2024)
Lötfreie Verbindungen - Teil 9: Ultraschallgeschweißte Verbindungen - Allgemeine
Anforderungen, Prüfverfahren und praktische Hinweise (IEC 60352-9:2024)
Connexions sans soudure - Partie 9: Connexions soudées par ultrasons - Exigences
générales, méthodes d’essai et guide pratique (IEC 60352-9:2024)
Ta slovenski standard je istoveten z: EN IEC 60352-9:2024
ICS:
29.120.20 Spojni elementi Connecting devices
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60352-9
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2024
ICS 31.220.10; 29.120.20
English Version
Solderless connections - Part 9: Ultrasonically welded
connections - General requirements, test methods and practical
guidance
(IEC 60352-9:2024)
Connexions sans soudure - Partie 9: Connexions soudées Lötfreie Verbindungen - Teil 9: Ultraschallgeschweißte
par ultrasons - Exigences générales, méthodes d'essai et Verbindungen - Allgemeine Anforderungen, Prüfverfahren
guide pratique und praktische Hinweise
(IEC 60352-9:2024) (IEC 60352-9:2024)
This European Standard was approved by CENELEC on 2024-03-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60352-9:2024 E
European foreword
The text of document 48B/3080/FDIS, future edition 1 of IEC 60352-9, prepared by SC 48B "Electrical
connectors" of IEC/TC 48 "Electrical connectors and mechanical structures for electrical and electronic
equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-12-28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-03-28
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60352-9:2024 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60721-3-1 NOTE Approved as EN IEC 60721-3-1
ISO 1463 NOTE Approved as EN ISO 1463
ISO 4063:2023 NOTE Approved as EN ISO 4063:2023 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-581 - International Electrotechnical Vocabulary - - -
Part 581: Electromechanical components
for electronic equipment
IEC 60068-1 2013 Environmental testing - Part 1: General EN 60068-1 2014
and guidance
IEC 60068-2-1 - Environmental testing - Part 2-1: Tests - EN 60068-2-1 -
Test A: Cold
IEC 60068-2-2 - Environmental testing - Part 2-2: Tests - EN 60068-2-2 -
Test B: Dry heat
IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - EN IEC 60068-2-14 -
Test N: Change of temperature
IEC 60068-2-30 - Environmental testing - Part 2-30: Tests - EN 60068-2-30 -
Test Db: Damp heat, cyclic (12 h + 12 h
cycle)
IEC 60068-2-60 - Environmental testing - Part 2-60: Tests - EN 60068-2-60 -
Test Ke: Flowing mixed gas corrosion test
IEC 60228 - Conductors of insulated cables - -
IEC 60512-1 - Connectors for electrical and electronic EN IEC 60512-1 -
equipment - Tests and measurements -
Part 1: Generic specification
IEC 60512-1-1 - Connectors for electronic equipment - EN 60512-1-1 -
Tests and measurements - Part 1-1:
General examination - Test 1a: Visual
examination
IEC 60512-1-2 - Connectors for electronic equipment - EN 60512-1-2 -
Tests and measurements - Part 1-2:
General examination - Test 1b:
Examination of dimension and mass
IEC 60512-2-1 - Connectors for electronic equipment - EN 60512-2-1 -
Tests and measurements - Part 2-1:
Electrical continuity and contact resistance
tests - Test 2a: Contact resistance -
Millivolt level method
IEC 60512-2-2 - Connectors for electronic equipment - EN 60512-2-2 -
Tests and measurements - Part 2-2:
Electrical continuity and contact resistance
tests - Test 2b: Contact resistance -
Specified test current method
IEC 60512-2-5 - Connectors for electronic equipment - EN 60512-2-5 -
Tests and measurements - Part 2-5:
Electrical continuity and contact resistance
tests - Test 2e: Contact disturbance
IEC 60512-3-1 - Connectors for electronic equipment - EN 60512-3-1 -
Tests and measurements - Part 3-1:
Insulation tests - Test 3a: Insulation
resistance
IEC 60512-4-1 - Connectors for electronic equipment - EN 60512-4-1 -
Tests and measurements - Part 4-1:
Voltage stress tests - Test 4a: Voltage
proof
IEC 60512-5-2 - Connectors for electronic equipment - EN 60512-5-2 -
Tests and measurements - Part 5-2:
Current-carrying capacity tests - Test 5b:
Current-temperature derating
IEC 60512-6-4 - Connectors for electronic equipment - EN 60512-6-4 -
Tests and measurements - Part 6-4:
Dynamic stress tests - Test 6d: Vibration
(sinusoidal)
IEC 60512-11-1 - Connectors for electrical and electronic EN IEC 60512-11-1 -
equipment - Tests and measurements -
Part 11-1: Climatic tests - Test 11a -
Climatic sequence
IEC 60512-11-4 - Connectors for electronic equipment - EN 60512-11-4 -
Tests and measurements - Part 11-4:
Climatic tests - Test 11d: Rapid change of
temperature
IEC 60512-11-7 - Connectors for electronic equipment - EN 60512-11-7 -
Tests and measurements - Part 11-7:
Climatic tests - Test 11g: Flowing mixed
gas corrosion test
IEC 60512-11-9 - Connectors for electronic equipment - EN 60512-11-9 -
Tests and measurements - Part 11-9:
Climatic tests - Test 11i: Dry heat
IEC 60512-11-10 - Connectors for electronic equipment - EN 60512-11-10 -
Tests and measurements - Part 11-10:
Climatic tests - Test 11j: Cold
IEC 60512-11-12 - Connectors for electronic equipment - EN 60512-11-12 -
Tests and measurements - Part 11-12:
Climatic tests - Test 11m: Damp heat,
cyclic
IEC 60512-16-4 - Connectors for electronic equipment - EN 60512-16-4 -
Tests and measurements - Part 16-4:
Mechanical tests on contacts and
terminations - Test 16d: Tensile strength
(crimped connections)
IEC 60512-16-7 - Connectors for electronic equipment - EN 60512-16-7 -
Tests and measurements - Part 16-7:
Mechanical tests on contacts and
terminations - Test 16g: Measurement of
contact deformation after crimping
IEC 60947-1 2020 Low-voltage switchgear and controlgear - EN IEC 60947-1 2021
Part 1: General rules
IEC 60999-1 - Connecting devices - Electrical copper EN 60999-1 -
conductors - Safety requirements for
screw-type and screwless-type clamping
units - Part 1: General requirements and
particular requirements for clamping units
for conductors from 0,2 mm2 up to 35 mm2
(included)
IEC 61191-1 2018 Printed board assemblies - Part 1: Generic EN IEC 61191-1 2018
specification - Requirements for soldered
electrical and electronic assemblies using
surface mount and related assembly
technologies
ISO 1463 2021 Metallic and oxide coatings - Measurement EN ISO 1463 2021
of coating thickness - Microscopial method
ISO 6722-1 - Road vehicles - 60 V and 600 V single- - -
core cables - Part 1: Dimensions, test
methods and requirements for copper
conductor cables
ISO 6722-2 - Road vehicles - 60 V and 600 V single- - -
core cables - Part 2: Dimensions, test
methods and requirements for aluminium
conductor cables
ISO 10447 - Resistance welding - Test of welds - Peel EN ISO 10447 -
and chisel testing of resistance spot and
projection welds
ISO 21747 2006 Statistical methods - Process performance - -
and capability statistics for measured
quality characteristics
IEC 60352-9 ®
Edition 1.0 2024-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Solderless connections –
Part 9: Ultrasonically welded connections – General requirements, test methods
and practical guidance
Connexions sans soudure –
Partie 9: Connexions soudées par ultrasons – Exigences générales, méthodes
d’essai et guide pratique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.220.10, 29.120.20 ISBN 978-2-8322-8216-8
– 2 – IEC 60352-9:2024 © IEC 2024
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 12
4 Wire and terminal information . 16
4.1 Conductor materials . 16
4.2 Conductor surface coating . 16
5 Requirements for ultrasonic welding . 16
5.1 Examples of ultrasonically welded connections . 16
5.2 General requirements . 19
5.3 Influence of wire length for welds at the other end of terminal connections . 20
5.4 Design requirements . 20
5.5 Mechanical and electrical protection of the weld package . 22
5.6 Conductor combinations – requirements . 23
5.7 Compaction ratio of ultrasonically welded connections . 23
6 Specimens . 25
6.1 General . 25
6.2 Type A1 or A2 specimen . 25
6.3 Type B1 or B2 specimen . 25
6.4 Type C specimen .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.