EN 63035:2017

SLOVENSKI STANDARD
01-april-2018
MIDI (digitalni vmesnik za glasbene inštrumente), specifikacija 1.0 (skrajšana
izdaja, 2015) (IEC 63035:2017)
MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015) (IEC
63035:2017)
MIDI (Musikalisches Instrument digitale Schnittstelle) Festlegung 1.0 (Gekürzte
Ausgabe, 2015) (IEC 63035:2017)
Midi (Interface Numerique pour Instruments de Musique) Specification 1.0 (Edition
abrégée, 2015) (IEC 63035:2017)
Ta slovenski standard je istoveten z: EN 63035:2017
ICS:
33.160.30 Avdio sistemi Audio systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 63035
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2017
ICS 33.160.30; 35.040.01; 35.200

English Version
MIDI (Musical Instrument Digital Interface) specification 1.0
(Abridged edition, 2015)
(IEC 63035:2017)
Midi (Interface Numerique pour Instruments de Musique) MIDI (Musikalisches Instrument digitale Schnittstelle)
Specification 1.0 (Edition abrégée, 2015) Festlegung 1.0 (Gekürzte Ausgabe, 2015)
(IEC 63035:2017) (IEC 63035:2017)
This European Standard was approved by CENELEC on 2017-07-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 63035:2017 E
European foreword
The text of document 100/2597/CDV, future edition 1 of IEC 63035, prepared by IEC/TC 100 "Audio,
video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 63035:2017.

The following dates are fixed:
(dop) 2018-04-24
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-07-24
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 63035:2017 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60130-9 -  Connectors for frequencies below 3 MHz -- EN 60130-9 -
Part 9: Circular connectors for radio and
associated sound equipment
IEC 63035 ®
Edition 1.0 2017-06
INTERNATIONAL
STANDARD
MIDI (musical instrument digital interface) specification 1.0

(Abridged Edition, 2015)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.160.30; 35.040.01; 35.200 ISBN 978-2-8322-4355-8

– 2 – IEC 63035:2017  IEC 2017

CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General . 8
4.1 Hardware . 8
4.2 Data format . 10
4.3 Message types . 11
4.3.1 General . 11
4.3.2 Channel messages . 11
4.3.3 System messages. 11
4.4 Data types . 12
4.4.1 General . 12
4.4.2 Status bytes . 12
4.4.3 Data bytes . 12
4.5 Channel modes . 13
4.6 Power-up default conditions . 14
5 MIDI implementation chart instructions . 14
5.1 Introduction . 14
5.2 General . 14
5.3 Function description . 14
5.3.1 Basic Channel . 14
5.3.2 Mode . 14
5.3.3 Note Number . 15
5.3.4 Velocity . 15
5.3.5 Aftertouch . 15
5.3.6 Pitch Bend . 15
5.3.7 Control Change . 15
5.3.8 Program Change . 15
5.3.9 System Exclusive . 15
5.3.10 System Common . 15
5.3.11 System Real Time . 15
5.3.12 Aux. messages . 16
5.3.13 Notes . 16
Annex A (normative) Summary of MIDI messages . 17
Annex B (normative) Control Change messages (Data bytes) . 20
B.1 Control Change messages and Channel Mode messages . 20
B.2 Registered Parameter numbers . 23
Annex C (normative) System Exclusive messages . 25
C.1 System Exclusive messages . 25
C.2 Universal System Exclusive messages . 25
Annex D (normative) MIDI Implementation Chart template . 30
Bibliography . 31

IEC 63035:2017  IEC 2017 – 3 –
Figure 1 – MIDI standard hardware . 9
Figure 2 – Types of MIDI bytes . 10
Figure 3 – Types of MIDI messages . 10
Figure 4 – Structure of a single message . 11
Figure 5 – Structure of System Exclusive message . 11

Table 1 – Modes for receiver . 13
Table 2 – Modes for transmitter . 13
Table A.1 – MIDI Specification 1.0 message summary . 17
Table B.1 – Control Changes and Mode Changes (Status bytes 176 to 191) . 20
Table B.2 – Registered Parameter numbers . 24
Table C.1 – System Exclusive messages . 25
Table C.2 – Universal System Exclusive messages . 26
Table D.1 – MIDI Implementation Chart template . 30

– 4 – IEC 63035:2017  IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MIDI (MUSICAL INSTRUMENT DIGITAL INTERFACE) SPECIFICATION 1.0
(Abridged Edition, 2015)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possi
...