Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work

IEC 62626-1:2014 applies to enclosed switches-disconnectors with rated voltages up to 1 000 V a.c. for repair and maintenance work or cleaning work in load circuits. Devices within the scope of this standard are derived from switch-disconnectors according to IEC 60947-3. Enclosed switch-disconnectors in this standard are suitable for isolation according to IEC 60947 series and are not supposed to be equipped with means for remote control or automatic switching to avoid unexpected or accidental start. These devices are not intended to be used for operational switching, quick start and stop or jogging.

Gekapselte Niederspannungsschaltgeräte - Teil 1: Gekapselte Lasttrennschalter außerhalb des Anwendungsbereiches von IEC 60947-3, zum Trennen während der Reparatur- und Wartungsarbeit

Appareillage à basse tension sous enveloppe - Partie 1: Interrupteur-sectionneur en coffret, en dehors du domaine d'application de la norme CEI 60947-3, destiné à garantir l'isolation pendant les phases de maintenance

L'IEC 62626-1:2014 s'applique aux interrupteurs-sectionneurs sous enveloppe, ayant une tension assignée allant jusqu'à 1 000 V en courant alternatif, pour les travaux de réparation et de maintenance, ou pour les opérations de nettoyage de circuits de charge. Les appareillages entrant dans le cadre de cette norme sont similaires aux interrupteurs-sectionneurs selon la CEI 60947-3. Les interrupteurs-sectionneurs sous enveloppe conformes à la présente norme conviennent à une isolation selon la série CEI 60947 et ne sont pas supposés être équipés de dispositif de contrôle à distance ou de mise sous tension automatique, pour éviter des démarrages inattendus ou accidentels. Ces appareillages ne sont pas destinés à être utilisés pour une mise sous tension fonctionnelle, un démarrage et un arrêt rapide ou un fonctionnement par à-coups.

Oprema, vgrajena v nizkonapetostne stikalne in krmilne naprave - 1. del: Vgrajeno stikalo, zunaj določb IEC 60947-3, za različno uporabo, za zagotavljanje izolacije električne opreme med popravljalnimi in vzdrževalnimi deli (IEC 62626-1:2014)

Standard EN IEC 62626-1 se uporablja za vgrajena stikala/ločilna stikala z naznačenimi izmeničnimi napetostmi do 1000 V za popravljalna in vzdrževalna dela ali čiščenje v obremenitvenih tokokrogih. Naprave znotraj področja uporabe tega standarda izhajajo iz stikal/ločilnih stikal v skladu s standardom IEC 60947-3. Vgrajena stikala/ločilna stikala v tem standardu so primerna za izolacijo v skladu s skupino standardov IEC 60947 in naj ne bi bila opremljena z načinom za daljinsko upravljanje ali samodejno preklapljanje, da bi se preprečil nepričakovan ali nezgoden vklop. Te naprave niso namenjene operativnemu preklapljanju, hitremu vklopu ali izklopu ali kratkemu vklopu. Naprave znotraj področja uporabe tega standarda zagotavljajo izolacijo električne opreme, zlasti v motornih tokokrogih, med popravljalnimi in vzdrževalnimi deli ali čiščenjem. Vgrajena stikala/ločilna stikala za različno uporabo za zagotavljanje izolacije električne opreme med popravljalnimi in vzdrževalnimi deli, imenovana »vzdrževalna stikala«, so v nadaljevanju označena kot naprave z: a) različnimi razredi; b) karakteristikami vsakega razreda; c) minimalnimi preskusnimi zahtevami; d) informacijami, ki se označijo na opremi ali jih da na voljo proizvajalec, na primer v katalogu.

General Information

Status
Published
Publication Date
22-May-2014
Withdrawal Date
20-Mar-2017
Current Stage
6060 - Document made available - Publishing
Start Date
23-May-2014
Completion Date
23-May-2014

Relations

Buy Standard

Standard
EN 62626-1:2014
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2014
2SUHPDYJUDMHQDYQL]NRQDSHWRVWQHVWLNDOQHLQNUPLOQHQDSUDYHGHO9JUDMHQR
VWLNDOR]XQDMGRORþE,(&]DUD]OLþQRXSRUDER]D]DJRWDYOMDQMHL]RODFLMH
HOHNWULþQHRSUHPHPHGSRSUDYOMDOQLPLLQY]GUåHYDOQLPLGHOL ,(&
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch
outside the scope of IEC 60947-3 for various applications, to provide isolation of
electrical equipment during repair and maintenance work
Appareillage basse tension en coffret - Partie 1: Interrupteur en coffret, en dehors du
domaine d’application de la norme CEI 60947-3, pour diverses applications, destiné à
garantir l’isolation des équipements pendant les phases de maintenance
Ta slovenski standard je istoveten z: EN 62626-1:2014
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62626-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 29.120.40; 29.130.20
English Version
Low-voltage switchgear and controlgear enclosed equipment -
Part 1: Enclosed switch-disconnectors outside the scope of IEC
60947-3 to provide isolation during repair and maintenance work
(IEC 62626-1:2014)
Appareillage basse tension sous enveloppe - Partie 1: Gekapselte Niederspannungsschaltgeräte - Teil 1:
Interrupteur-sectionneur en coffret, en dehors du domaine Gekapselte Lasttrennschalter außerhalb des
d'application de la norme CEI 60947-3, destiné à garantir Anwendungsbereiches von IEC 60947-3, zum Trennen
l'isolation pendant les phases de maintenance während der Reparatur- und Wartungsarbeit
(CEI 62626-1:2014) (IEC 62626-1:2014)
This European Standard was approved by CENELEC on 2014-03-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62626-1:2014 E
Foreword
The text of document 17B/1839A/FDIS, future edition 1 of IEC 62626-1, prepared by SC 17B "Low-
voltage switchgear and controlgear" of IEC/TC 17 "Switchgear and controlgear" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62626-1:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2014-12-21
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-03-21
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 62626-1:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60204-1 NOTE Harmonized as EN 60204-1.
IEC 60364-5-51 NOTE Harmonized as HD 60364-5-51.
IEC 60529 NOTE Harmonized as EN 60529.
IEC 60947-5-1 NOTE Harmonized as EN 60947-5-1.
ISO 13850 NOTE Harmonized as EN ISO 13850.

- 3 - EN 62626-1:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 60050 series International Electrotechnical Vocabulary - series
IEC 60947-1 2007 Low-voltage switchgear and controlgear -- EN 60947-1 2007
A1 2010 Part 1: General rules
IEC 60947-3 2008 Low-voltage switchgear and controlgear -- EN 60947-3 2009
A1 2012 Part 3: Switches, disconnectors, switch-A1 2012
disconnectors and fuse-combination units
IEC 62262 2002 Degrees of protection provided by EN 62262 2002
enclosures for electrical equipment against
external mechanical impacts (IK code)

IEC 62626-1 ®
Edition 1.0 2014-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage switchgear and controlgear enclosed equipment –

Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to

provide isolation during repair and maintenance work

Appareillage à basse tension sous enveloppe –

Partie 1: Interrupteur-sectionneur en coffret, en dehors du domaine

d'application de la norme CEI 60947-3, destiné à garantir l'isolation pendant

les phases de maintenance
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX L
ICS 29.120.40, 29.130.20 ISBN 978-2-8322-1407-7

– 2 – 62626-1 © IEC:2014
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Classification . 7
5 Characteristics . 7
6 Product information . 8
6.1 Nature of information . 8
6.2 Markings . 8
6.2.1 Front-marking . 8
6.2.2 Additional marking . 8
7 Normal service, mounting and transport conditions . 9
8 Constructional and performance requirements . 9
8.1 Constructional requirements . 9
8.1.1 General . 9
8.1.2 Locking . 9
8.1.3 Environmental influences . 9
8.1.4 Mechanical strength. 9
8.1.5 Degree of protection . 9
8.1.6 Operation/actuation . 9
8.2 Performance requirements . 9
8.2.1 General . 9
8.2.2 Switching capacity . 9
9 Tests . 10
9.1 General . 10
9.2 Type tests . 10
Bibliography . 11

Figure 1 – Symbol for marking according to this standard . 8

Table 1 – Requirements and tests for devices . 10

62626-1 © IEC:2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE SWITCHGEAR AND
CONTROLGEAR ENCLOSED EQUIPMENT –

Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3
to provide isolation during repair and maintenance work

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 6262
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.