EN IEC 63252:2020

SLOVENSKI STANDARD
01-november-2020
Nadomešča:
SIST EN 50597:2019
Poraba energije prodajnih avtomatov
Energy consumption of vending machines
Ta slovenski standard je istoveten z: EN IEC 63252:2020
ICS:
27.010 Prenos energije in toplote na Energy and heat transfer
splošno engineering in general
55.230 Razdelilni in prodajni Distribution and vending
avtomati machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63252

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 27.015; 97.130.20 Supersedes EN 50597:2018 and all of its amendments
and corrigenda (if any)
English Version
Energy consumption of vending machines
(IEC 63252:2020)
Consommation d'énergie des distributeurs automatiques Energieverbrauch von Verkaufsautomaten
(IEC 63252:2020) (IEC 63252:2020)
This European Standard was approved by CENELEC on 2020-08-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63252:2020 E
European foreword
The text of document 59/730/FDIS, future edition 1 of IEC 63252, prepared by IEC/TC 59
"Performance of household and similar electrical appliances" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 63252:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2021-05-17
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-08-17
document have to be withdrawn
This document supersedes EN 50597:2018 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 63252:2020 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62552 (series) NOTE Harmonized as EN 62552 (series)
ISO 23953-1 NOTE Harmonized as EN ISO 23953-1
ISO 23953-2 NOTE Harmonized as EN ISO 23953-2
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60335-1 -  Household and similar electrical appliances EN 60335-1 -
- Safety - Part 1: General requirements
IEC 60335-2-75 -  Household and similar electrical appliances - -
- Safety - Part 2-75: Particular
requirements for commercial dispensing
appliances and vending machines
ISO 5149-2 -  Refrigerating systems and heat pumps - - -
Safety and environmental requirements –
Part 2: Design, construction, testing,
marking and documentation
ISO 5149-3 -  Refrigerating systems and heat pumps - - -
Safety and environmental requirements -
Part 3: Installation site
- - Electrical and electronic household and EN 50564 -
office equipment – Measurement of low
power consumption
IEC 63252 ®
Edition 1.0 2020-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Energy consumption of vending machines

Consommation d'énergie des distributeurs automatiques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.015; 97.130.20 ISBN 978-2-8322-8598-5

– 2 – IEC 63252:2020 © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
3.1 Terms relating specifically to the vending process . 7
3.2 Terms relating to the tests . 8
4 General requirements . 9
4.1 Applicability . 9
4.2 Test room . 9
4.3 Instruments, measuring equipment and measuring accuracy . 10
4.4 Power supply . 10
5 Conditions for the tests . 10
5.1 General . 10
5.2 Equipment location for test. 11
5.3 Energy consumption and recording . 11
5.4 M-cans . 11
5.5 Product loading for test . 11
5.6 Product storage temperatures . 12
5.7 Stabilization . 12
6 Energy consumption measurement . 12
6.1 General . 12
6.2 Loading and pull-down test . 13
6.2.1 Test procedure . 13
6.2.2 Loading for loading and pull-down test . 13
6.2.3 Measurement for loading and pull-down test . 14
6.3 Ready mode, energy-saving mode and recovery period measurements. 14
6.3.1 General . 14
6.3.2 Test procedure . 15
6.3.3 Measurement . 15
6.4 Measurement of the net volume . 16
7 Calculations – Energy consumption . 16
8 Marking plate . 17
Annex A (informative) Test timeline . 18
Annex B (informative) Test report template . 19
Bibliography . 23

Figure A.1 – Test timeline . 18
Figure B.1 – Location of machine . 20
Figure B.2 – Spiral machine . 21
Figure B.3 – Glass fronted can/bottle machine . 21
Figure B.4 – Carousel or drum machine . 22
Figure B.5 – Combined snack and vertical stack can machine . 22

IEC 63252:2020 © IEC 2020 – 3 –
Table 1 – Vending machine categories . 6
Table 2 – Description of vending machine categories . 9
Table 3 – Product loading temperatures for reloading and pull-down test . 14
Table 4 – Permitted loading times . 14
Table B.1 – Data to be reported . 19

– 4 – IEC 63252:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENERGY CONSUMPTION OF VENDING MACHINES

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publicat
...