EN 61800-5-1:2007

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektrische Leistungsantriebssysteme mit einstellbarer Drehzahl -- Teil 5-1: Anforderungen an die Sicherheit - Elektrische, thermische und energetische AnforderungenEntraînements électriques de puissance à vitesse variable -- Partie 5-1: Exigences de sécurité - Electrique, thermique et énergétiqueAdjustable speed electrical power drive systems -- Part 5-1: Safety requirements - Electrical, thermal and energy29.200QDSDMDQMHRectifiers. Convertors. Stabilized power supply29.160.30MotorjiMotorsICS:Ta slovenski standard je istoveten z:EN 61800-5-1:2007SIST EN 61800-5-1:2008en,fr,de01-januar-2008SIST EN 61800-5-1:2008SLOVENSKI
STANDARDSIST EN 61800-5-1:20041DGRPHãþD

EUROPEAN STANDARD EN 61800-5-1 NORME EUROPÉENNE
EUROPÄISCHE NORM September 2007
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61800-5-1:2007 E
ICS 29.130 Supersedes EN 61800-5-1:2003
English version
Adjustable speed electrical power drive systems -
Part 5-1: Safety requirements -
Electrical, thermal and energy (IEC 61800-5-1:2007)
Entraînements électriques de puissance
à vitesse variable -
Partie 5-1: Exigences de sécurité -
Electrique, thermique et énergétique (CEI 61800-5-1:2007)
Elektrische Leistungsantriebssysteme
mit einstellbarer Drehzahl -
Teil 5-1: Anforderungen
an die Sicherheit -
Elektrische, thermische
und energetische Anforderungen (IEC 61800-5-1:2007)
This European Standard was approved by CENELEC on 2007-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

- 2 -
Foreword The text of document 22G/178/FDIS, future edition 2 of IEC 61800-5-1, prepared by SC 22G, Adjustable speed electric drive systems incorporating semiconductor power converters, of IEC TC 22, Power electronic systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61800-5-1 on 2007-08-01. This European Standard supersedes EN 61800-5-1:2003. The major areas of change in EN 61800-5-1:2007 are the following: –
addition of alphabetical Table 1 in Clause 3; –
addition of Table 2 in 4.1 for relevance to PDS/CDM/BDM; –
addition of Table 4 summary of decisive voltage class requirements; –
expansion of subclause on protective bonding (4.3.5.3); –
clarification of distinction between touch current and protective conductor current; –
revision of section on insulation (now 4.3.6) to include solid insulation; –
addition of overvoltage categories I and II to HV insulation voltage; –
revision of section on Solid insulation (now 4.3.6.8); –
addition of high-frequency insulation requirements (4.3.6.9, Annex E); –
addition of requirements for liquid-cooled PDS (4.4.5); –
addition of climatic and vibration tests (5.2.6); –
clarification of voltage test procedure to avoid over-stress of basic insulation (5.2.3.2.3); –
revision of short-circuit test requirement for large, high-voltage and one-off PDS (now 5.2.3.6); –
addition of informative Annex B for overvoltage category reduction. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2008-05-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2010-08-01 Annex ZA has been added by CENELEC. __________

- 3 - EN 61800-5-1:2007 Endorsement notice The text of the International Standard IEC 61800-5-1:2007 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60034-9 NOTE
Harmonized as EN 60034-9:2005 (modified). IEC 60071 NOTE
Harmonized in EN 60071 series (not modified). IEC 60071-1 NOTE
Harmonized as EN 60071-1:2006 (not modified). IEC 60071-2 NOTE
Harmonized as EN 60071-2:1997 (not modified). IEC 60146-1-1 NOTE
Harmonized as EN 60146-1-1:1993 (not modified). IEC 60309-1 NOTE
Harmonized as EN 60309-1:1999 (not modified). IEC 60364-4-44 NOTE
Amendment 1:2003 to IEC 60364-4-44:2001
is harmonized as HD 60364-4-443:2006 (modified) IEC 60664 NOTE
Harmonized in EN 60664 series (not modified). IEC 60695-2-11 NOTE
Harmonized as EN 60695-2-11:2001 (not modified). IEC 60695-2-12 NOTE
Harmonized as EN 60695-2-12:2001 (not modified). IEC 60721 NOTE
Harmonized in EN 60721 series (not modified). IEC 61082 NOTE
Harmonized in EN 61082 series (not modified). IEC 61140 NOTE
Harmonized as EN 61140:2002 (not modified). IEC 61180-1 NOTE
Harmonized as EN 61180-1:1994 (not modified). IEC 61189-2 NOTE
Harmonized as EN 61189-2:2006 (not modified). IEC 61643-12 NOTE
Harmonized as CLC/TS 61643-12:2006 (modified). IEC 61800-3 NOTE
Harmonized as EN 61800-3:2004 (not modified). IEC 62079 NOTE
Harmonized as EN 62079:2001 (not modified). __________

- 4 -
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60034 Series Rotating electrical machines EN 60034 Series
IEC 60034-1 -1) Rotating electrical machines -
Part 1: Rating and performance EN 60034-1 20042)
IEC 60034-5
-1) Rotating electrical machines -
Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification EN 60034-5 20012)
IEC 60050-111 -1) International Electrotechnical Vocabulary (IEV) -
Chapter 111: Physics and chemistry - -
IEC 60050-151 -1) International Electrotechnical Vocabulary (IEV) -
Part 151: Electrical and magnetic devices - -
IEC 60050-161 -1) International Electrotechnical Vocabulary (IEV) -
Chapter 161: Electromagnetic compatibility - -
IEC 60050-191 -1) International Electrotechnical Vocabulary (IEV) -
Chapter 191: Dependability and quality of service - -
IEC 60050-441 -1) International Electrotechnical Vocabulary (IEV) -
Chapter 441: Switchgear, controlgear and fuses - -
IEC 60050-442 -1) International Electrotechnical Vocabulary (IEV) -
Part 442: Electrical accessories - -
IEC 60050-551 -1) International Electrotechnical Vocabulary (IEV) -
Part 551: Power electronics - -
IEC 60050-601 -1) International Electrotechnical Vocabulary (IEV) -
Chapter 601: Generation, transmission and distribution of electricity - General - -
1) Undated reference. 2) Valid edition at date of issue.

- 5 - EN 61800-5-1:2007 Publication Year Title EN/HD Year IEC 60060-1
1989 High-voltage test techniques -
Part 1: General definitions and test requirements HD 588.1 S1 1991
IEC 60068-2-2 1974 Environmental testing -
Part 2: Tests - Tests B: Dry heat EN 60068-2-23)
IEC 60068-2-6
-1) Environmental testing -
Part 2: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 19952)
IEC 60068-2-78 -1) Environmental testing -
Part 2-78: Tests - Test Cab: Damp heat, steady state EN 60068-2-78 20012)
IEC 60112
2003 Method for the determination of the proof
and the comparative tracking indices of solid insulating materials EN 60112 2003
IEC 60204-11 -1) Safety of machinery - Electrical equipment
of machines -
Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV EN 60204-11 2000
IEC 60309 (mod) Series Plugs, socket-outlets and couplers for industrial purposes EN 60309 Series
IEC 60364-1 (mod) -1) Low-voltage electrical installations -
Part 1: Fundamental principles, assessment of general characteristics, definitions -4) -
IEC 60364-5-54 (mod) 2002 Electrical installations of buildings -
Part 5-54: Selection and erection of electrical equipment - Earthing arrangements, protective conductors and protective bonding conductors HD 60364-5-54 2007
IEC 60417 Data-base Graphical symbols for use on equipment - -
IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May
1991 1993
IEC 60617 Data-base Graphical symbols for diagrams - -
IEC 60664-1 + A1 + A2 1992 2000 2002 Insulation coordination for equipment within low-voltage systems -
Part 1: Principles, requirements and tests
EN 60664-1 5)
IEC 60664-3 2003 Insulation coordination for equipment within low-voltage systems -
Part 3: Use of coating, potting or moulding for protection against pollution EN 60664-3 2003
3) EN 60068-2-2 includes supplement A:1976 to IEC 60068-2-2. 4) IEC 60364-1:2005 (modified) will be submitted to formal vote for acceptance as HD 60364-1. 5) EN 60664-1 is superseded by EN 60664-1:2007, which is based on IEC 60664-1:2007.

- 6 -
Publication Year Title EN/HD Year IEC 60664-4 2005 Insulation coordination for equipment within low-voltage systems -
Part 4: Consideration of high-frequency voltage stress EN 60664-4 + corr. October
2006 2006
IEC 60695-2-10 -1) Fire hazard testing -
Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure EN 60695-2-10 20012)
IEC 60695-2-13 -1) Fire hazard testing -
Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignitability test method for materials EN 60695-2-13 20012)
IEC 60695-11-10 -1) Fire hazard testing -
Part 11-10: Test flames - 50 W horizontal and vertical flame test methods EN 60695-11-10 19992)
IEC 60695-11-20
-1) Fire hazard testing -
Part 11-20: Test flames - 500 W flame test methods EN 60695-11-20 19992)
IEC/TR 60755 -1) General requirements for residual current operated protective devices - -
IEC 60947-7-1
2002 Low-voltage switchgear and controlgear -
Part 7-1: Ancillary equipment - Terminal blocks for copper conductors EN 60947-7-1 2002
IEC 60947-7-2 2002 Low-voltage switchgear and controlgear -
Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors EN 60947-7-2 2002
IEC 60990 1999 Methods of measurement of touch current and protective conductor current EN 60990 1999
IEC 61230 (mod) -1) Live working - Portable equipment for earthing or earthing and short-circuiting EN 61230 +A11 19952) 1999
IEC 61800-1 -1) Adjustable speed electrical power drive systems -
Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems EN 61800-1 19982)
IEC 61800-2 -1) Adjustable speed electrical power drive systems -
Part 2: General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems EN 61800-2 19982)
IEC 61800-4 -1) Adjustable speed electrical power drive systems -
Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV EN 61800-4 20032)
IEC 62020 -1) Electrical accessories - Residual current monitors for household and similar uses (RCMs) - -

- 7 - EN 61800-5-1:2007 Publication Year Title EN/HD Year IEC 62271-102
-1) High-voltage switchgear and controlgear -
Part 102: Alternating current disconnectors and earthing switches
EN 62271-102 + corr. March
20022) 2005
ISO 3864 Series Graphical symbols - Safety colours and safetysigns - -
ISO 7000 2004 Graphical symbols for use on equipment - Index and synopsis - -

INTERNATIONAL STANDARD IECCEI NORME INTERNATIONALE61800-5-1Second editionDeuxième édition2007-07 Adjustable speed electrical
power drive systems – Part 5-1: Safety requirements – Electrical, thermal and energy
Entraînements électriques de
puissance à vitesse variable – Partie 5-1: Exigences de sécurité – Electrique, thermique et énergétique XE Commission Electrotechnique InternationaleInternational Electrotechnical CommissionPRICE CODE CODE PRIX For price, see current cataloguePour prix, voir catalogue en vigueur

– 2 – 61800-5-1 © IEC:2007
CONTENTS FOREWORD.5
1 Scope.7 2 Normative references.7 3 Terms and definitions.10 4 Protection against electric shock, thermal, and energy hazards.16 4.1 General.16 4.2 Fault conditions.17 4.3 Protection against electric shock.18 4.4 Protection against thermal hazards.51 4.5 Protection against energy hazards.56 4.6 Protection against environmental stresses.57 5 Test requirements.57 5.1 General.57 5.2 Test specifications.60 6 Information and marking requirements.
...