iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50144-2-5:1996

(Main)

Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives

Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives

This clause of Part 1 is applicable except as follows : 1.1 Addition: This standard applies to all types of circular saws for cutting wood and similar materials, and to circular knives. These requirements do not cover circular saws when mounted in a support for use as fixed tools.

Sicherheit handgeführter motorbetriebener Elektrowerkzeuge - Teil 2-5: Besondere Anforderungen an Kreissägen und Rundmesser

Sécurité des outils électroportatifs à moteur - Partie 2-5: Règles particulières pour les scies circulaires et les couteaux circulaires

Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives

General Information

Status
Withdrawn
Publication Date
21-Feb-1996
Withdrawal Date
30-Nov-1996
ICS
25.080.60 - Sawing machines
25.140.20 - Electric tools
Technical Committee
CLC/TC 116 - Safety of hand-held motor-operated electric tools
Drafting Committee
IEC/TC 116 - Safety of hand-held motor-operated electric tools
Parallel Committee
IEC/SC 61F - IEC_SC_61F --> TC 116
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Dec-2001
Completion Date
01-Dec-2001
Mandate
M/083 - Machinery
Ref Project
SIST EN 50144-2-5:1999 - Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for circular saws and circular knives

Relations

Replaces
HD 400.2E S2:1988/A1:1991 - Hand-held motor operated tools - Part II: Particular specifications - Section E: Circular saws and circular knives
Effective Date
29-Jan-2023
Replaced By
EN 50144-2-5:1999 - Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives
Effective Date
29-Jan-2023

Buy Standard

EN 50144-2-5:1999EN 50144-2-5:1999
PreviousNext
Standard
EN 50144-2-5:1999
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-1999
1DGRPHãþD
SIST HD 400.2E S2:1995
Safety of hand-held electric motor operated tools - Part 2-5: Particular
requirements for circular saws and circular knives
Safety of hand-held electric motor operated tools -- Part 2-5: Particular requirements for
circular saws and circular knives
Sicherheit handgeführter motorbetriebener Elektrowerkzeuge -- Teil 2-5: Besondere
Anforderungen an Kreissägen und Rundmesser
Sécurité des outils électroportatifs à moteur -- Partie 2-5: Règles particulières pour les
scies circulaires et les couteaux circulaires
Ta slovenski standard je istoveten z: EN 50144-2-5:1996
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 61029-2-5:2011/A11:2015(Amendment)
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws
SIST EN 61029-2-5:2012/A11:2015

This amendment was developed to bring EN 61029-2-5:2011 in line with the European Machinery Directive 2006/42/EC
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-11:2012/A11:2013(Amendment)
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
SIST EN 61029-2-11:2013/A11:2014

2013-07-10 - Publication editing allocated to cpalagi@cencenelec.eu 2013-02-04 - UAP text to be sent to Consultant prior to UAP D144/C006: NWI approved*2013-03-22: UAP processing allocated to aclausse@cencenelec.eu
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-11:2012(Main)
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
SIST EN 61029-2-11:2013

Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-5:2011(Main)
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws
SIST EN 61029-2-5:2012

Applies to transportable band saws having a length of saw band not more than 2 500 mm and band wheels having a diameter of not more than 315 mm.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-5:2011/A11:2015(Amendment)
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws
SIST EN 61029-2-5:2012/A11:2015

This amendment was developed to bring EN 61029-2-5:2011 in line with the European Machinery Directive 2006/42/EC
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-11:2012/A11:2013(Amendment)
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
SIST EN 61029-2-11:2013/A11:2014

2013-07-10 - Publication editing allocated to cpalagi@cencenelec.eu 2013-02-04 - UAP text to be sent to Consultant prior to UAP D144/C006: NWI approved*2013-03-22: UAP processing allocated to aclausse@cencenelec.eu
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-11:2012(Main)
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws
SIST EN 61029-2-11:2013

Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61029-2-5:2011(Main)
Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws
SIST EN 61029-2-5:2012

Applies to transportable band saws having a length of saw band not more than 2 500 mm and band wheels having a diameter of not more than 315 mm.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-9:2024(Main)
Rotating electrical machines - Part 9: Noise limits
SIST EN IEC 60034-9:2025

IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics: - standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level - rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA) - rated speed not greater than 3 750 min–1 This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition: a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered. b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels. c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA. d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60034-12:2024(Main)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
SIST EN IEC 60034-12:2025

IEC 60034-12:2024 is available as IEC 60034-12:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60034-12:2024 specifies the parameters for eight designs of starting performance of single-speed three-phase 50 Hz or 60 Hz cage induction motors in accordance with IEC 60034‑1 that: - have a rated voltage up to 1 000 V; - are intended for direct-on-line or star-delta starting; - are rated on the basis of duty type S1; - are constructed to any degree of protection as defined in IEC 60034-5 and explosion protection. This document also applies to dual voltage motors provided that the flux saturation level is the same for both voltages. This fourth edition cancels and replaces the third edition published in 2016. Aligned with the requirements for explosion protected motors from TC31 WG27 - new clause on methods for measuring locked-rotor current and torque; - new informative annex on the general current and torque characteristics with locked rotor; - new informative annex on correction of voltage and frequency; - aligned with the requirements for explosion protected motors from TC31 WG27.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day