iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1559-2:2000

(Main)

Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings

Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings

This part of EN 1559 specifies the additional technical delivery conditions for steel castings unless other conditions have been agreed at the time of enquiry and order. This standard is also applicable to nickel and cobalt alloy castings.

Gießereiwesen - Technische Lieferbedingungen - Teil 2: Zusätzliche Anforderungen an Stahlgußstücke

Dieser Teil von prEN 1559 legt die zusätzlichen technischen Lieferbedingungen für Stahlgußstücke fest, soweit nicht bei der Bestellung andere Bedingungen vereinbart wurden. Diese Norm kann für Gußstücke aus Nickel- und Kobaltlegierungen verwendet werden.

Fonderie - Conditions techniques de fourniture - Partie 2: Spécifications complémentaires pour les pièces moulées en acier

La présente partie de l'EN 1559 spécifie les conditions techniques complémentaires de fourniture pour les pièces moulées en acier, à moins que d'autres conditions aient été convenues au moment de l'appel d'offres et de la commande. La présente norme peut être utilisée pour les pièces moulées en alliages de nickelet de cobalt.

Livarstvo - Tehnični dobavni pogoji - 2. del: Dodatne zahteve pri jeklenih ulitkih

General Information

Status
Withdrawn
Publication Date
15-Feb-2000
Withdrawal Date
30-Sep-2014
ICS
77.140.80 - Iron and steel castings
Technical Committee
ECISS/TC 111 - Steel castings and forgings
Drafting Committee
ECISS/TC 31 - Steel castings
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
01-Oct-2014
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 1559-2:2000 - Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings

Relations

Replaced By
EN 1559-2:2014 - Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
Effective Date
08-Jun-2022

Buy Standard

EN 1559-2:2000EN 1559-2:2000
PreviousNext
Standard
EN 1559-2:2000
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gießereiwesen - Technische Lieferbedingungen - Teil 2: Zusätzliche Anforderungen an StahlgußstückeFonderie - Conditions techniques de fourniture - Partie 2: Spécifications complémentaires pour les pieces moulées en acierFounding - Technical conditions of delivery - Part 2: Additional requirements for steel castings77.140.80Železni in jekleni ulitkiIron and steel castingsICS:Ta slovenski standard je istoveten z:EN 1559-2:2000SIST EN 1559-2:2000en01-november-2000SIST EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 13520:2023(Main)
Determination of ferrite content in austenitic stainless steel castings (ISO 13520:2023)
SIST EN ISO 13520:2023

Procedures are covered for estimating ferrite content in certain grades of austenitic iron-chromium-nickel alloy castings that have compositions balanced to create the formation of ferrite as a second phase in amounts controlled within specified limits. Methods are described for estimating ferrite content by chemical, magnetic and metallographic means.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10283:2019(Main)
Corrosion resistant steel castings
SIST EN 10283:2019

This document applies to corrosion resistant steel castings for general purposes.
This document relates to castings manufactured from martensitic, austenitic, fully austenitic and
austenitic-ferritic steel grades characterized by their chemical composition (see Table 1) and mechanical properties (see Table 2).
ln cases where castings are joined by welding by the founder, this document applies.
ln cases where castings are welded:
- to wrought products (plates, tubes, forgings);
- or by non-founders,
this document does not apply.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10228-1:2016(Main)
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
SIST EN 10228-1:2016

This European Standard describes techniques and acceptance criteria to be used for the magnetic particle testing of forgings manufactured from ferromagnetic materials. The method described is used for the detection of surface discontinuities. It can also detect discontinuities just below the surface but the sensitivity to such discontinuities decreases rapidly with depth.
NOTE   A steel forging is considered to be ferromagnetic if the magnetic flux density is greater than 1 T for a tangential magnetic field strength of 2,4 kA/m.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11970:2016(Main)
Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016)
SIST EN ISO 11970:2016

ISO 11970:2016 specifies how a welding procedure specification (WPS) for production welding of steel castings is qualified.
It defines the conditions for the execution of welding procedure qualification tests and the limits of validity of a qualified welding procedure for all practical welding operations within the range of essential variables.
Tests are intended to be carried out in accordance with this International Standard unless additional tests are specified by the purchaser or by agreement between the contracting parties.
ISO 11970:2016 applies to the arc welding of steel castings. The principles of this International Standard can be applied to other fusion welding processes subject to agreement between the contracting parties.
In the case of specific service, material or manufacturing conditions, tests more comprehensive than those specified by this International Standard can be specified by the purchaser, in order to gain more information, e.g. longitudinal weld tensile tests, bend tests, chemical analyses, ferrite determination in austenitic stainless steels, elongation, Charpy "V" impact tests, and radiography.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10293:2015(Main)
Steel castings - Steel castings for general engineering uses
SIST EN 10293:2015

This European Standard applies to steel castings:
-   for general engineering uses. Its uses include machinery (mechanical, electrical...), automotive industries, railroad, armament, agricultural equipment, mining, etc.
In cases where castings are joined by welding by the founder, this document applies.
In cases where castings are welded:
-   to wrought products (plates, tubes, forgings...), or
-   by non-founders,
this document does not apply.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1559-2:2014(Main)
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
SIST EN 1559-2:2014

This part of EN 1559 specifies the additional technical delivery conditions for steel castings unless other conditions have been agreed at the time of enquiry and order.
This European Standard is also applicable to nickel and cobalt alloy castings.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10349:2009(Main)
Steel castings - Austenitic manganese steel castings
SIST EN 10349:2010

This European Standard specifies austenitic manganese cast steels for wear-resistant service. The grades
covered by this European Standard will experience maximum service life in applications where the surface of
the casting is subject to impact.
This European Standard retains the same format for clauses as EN 1559-1 and EN 1559-2. It shall be used in
conjunction with these standards. Where no text is given under a clause heading, the corresponding clause
of EN 1559-1 or EN 1559-2 applies.
The structure of this standard is as follows:
a) clauses and subclauses preceded by Ø indicates no additional conditions to Part 1 or Part 2 1 )
of EN 1559;
b) subclauses without any marking are mandatory.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10340:2007/AC:2008(Corrigendum)
Steel castings for structural uses
SIST EN 10340:2007/AC:2008

2009-08-13: OD harmonized and citation flag set following request by ADC
2008-09-24 OJEC removed for Dir 89/106 following request by ADC
TC - Correction of page 19, Table ZA.3, 1st column titled "Tasks", 2nd sub-column "Certification of FPC on the basis of", last row of the 3rd sub-column, replace "Continuous surveillance, assessment and approval of FPC" with "Certification of FPC by notified body"

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10340:2007(Main)
Steel castings for structural uses
SIST EN 10340:2007

This European Standard applies to steel castings:
-   for structural uses in buildings and civil engineering works. Its uses include housing and service buildings, bridges, roads, pipe network.
In cases where castings are joined by welding by the founder, this European Standard applies.
This European Standard does not apply in cases where castings are welded:
-   to wrought products (plates, tubes, forgings...);
-               or by non founders.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10295:2002(Main)
Heat resistant steel castings
SIST EN 10295:2003

This European Standard applies to heat resistant steel castings, for general purposes (non pressure) above 600°C. It applies also to heat resistant nickel and cobalt base alloys.  This standard relates to castings manufactured from ferritic, austenitic-ferritic, austenitic steels, nickel and cobalt base alloys (characterised by their chemical composition (see table 1) and mechanical properties (see table 2)). In cases where castings are joined by welding by the founder, this European Standard applies.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day