iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 6506-1:2014

(Main)

Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)

Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)

ISO 6506-1:2014 specifies the method for the Brinell hardness test for metallic materials. It is applicable to both fixed location and portable hardness testing machines.
For some specific materials and/or products, particular International Standards exist (e.g. ISO 4498) and make reference to this International Standard.

Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 1: Prüfverfahren (ISO 6506-1:2014)

In diesem Teil von ISO 6506 ist das Verfahren für die Prüfung der Brinellhärte von metallischen Werkstoffen festgelegt. Er ist anwendbar für ortsgebundene und ortsveränderliche Härteprüfmaschinen.
Für einige besondere Werkstoffe und/oder Erzeugnisse gibt es spezielle Internationale Normen (z. B. ISO 4498-1), die sich auf diese Norm beziehen.

Matériaux métalliques - Essai de dureté Brinell - Partie 1: Méthode d'essai (ISO 6506-1:2014)

L'ISO 6506-1:2014 spécifie la méthode d'essai de dureté Brinell pour les matériaux métalliques. Elle s'applique à la fois aux machines d'essai de dureté fixes et portables.
Pour des matériaux et/ou produits spécifiques, des Normes internationales spécifiques existent (par exemple l'ISO 4498) et font référence à la présente Norme internationale.

Kovinski materiali - Preskus trdote po Brinellu - 1. del: Preskusna metoda (ISO 6506-1:2014)

Ta del standarda ISO 6506 določa metodo za preskus trdote po Brinellu za kovinske materiale. Uporablja se za nepremične in premične naprave za preskušanje trdote.
Za nekatere posebne materiale in/ali izdelke obstajajo posamezni mednarodni standardi (npr. standard ISO 4498), i se sklicujejo na ta mednarodni standard.

General Information

Status
Published
Publication Date
23-Sep-2014
Withdrawal Date
30-Mar-2015
ICS
77.040.10 - Mechanical testing of metals
Technical Committee
ECISS/TC 101 - Test methods for steel (other than chemical analysis)
Drafting Committee
ECISS/TC 101 - Test methods for steel (other than chemical analysis)
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Sep-2014
Completion Date
24-Sep-2014
Ref Project
SIST EN ISO 6506-1:2014 - Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)

Relations

Replaces
EN ISO 6506-1:2005 - Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2005)
Effective Date
01-Oct-2014
Revised
prEN ISO 6506-1 - Metallic materials - Brinell hardness test - Part 1: Test method (ISO/DIS 6506-1:2023)
Effective Date
20-Oct-2021

Buy Standard

EN ISO 6506-1:2014EN ISO 6506-1:2014
PreviousNext
Standard
EN ISO 6506-1:2014
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6506-1:2014
01-december-2014
1DGRPHãþD
SIST EN ISO 6506-1:2006
Kovinski materiali - Preskus trdote po Brinellu - 1. del: Preskusna metoda (ISO
6506-1:2014)
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 1: Prüfverfahren (ISO 6506-
1:2014)
Matériaux métalliques - Essai de dureté Brinell - Partie 1: Méthode d'essai (ISO 6506-
1:2014)
Ta slovenski standard je istoveten z: EN ISO 6506-1:2014
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
SIST EN ISO 6506-1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6506-1:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 6506-1:2014

EUROPEAN STANDARD
EN ISO 6506-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2014
ICS 77.040.10 Supersedes EN ISO 6506-1:2005
English Version
Metallic materials - Brinell hardness test - Part 1: Test method
(ISO 6506-1:2014)
Matériaux métalliques - Essai de dureté Brinell - Partie 1: Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 1:
Méthode d'essai (ISO 6506-1:2014) Prüfverfahren (ISO 6506-1:2014)
This European Standard was approved by CEN on 30 August 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6506-1:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 6506-1:2014
EN ISO 6506-1:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 6506-1:2014
EN ISO 6506-1:2014 (E)
Foreword
This document (EN ISO 6506-1:2014) has been prepared by Technical Committee ISO/TC 164 “Mechanical
testing of metals” in collaboration with Technical Committee ECISS/TC 101 “Test methods for steel (other
than chemical analysis)” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2015, and conflicting national standards shall be withdrawn at
the latest by March 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6506-1:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 6506-1:2014 has been approved by CEN as EN ISO 6506-1:2014 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 6506-1:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 6506-1:2014
INTERNATIONAL ISO
STANDARD 6506-1
Third edition
2014-10-01
Metallic materials — Brinell hardness
test —
Part 1:
Test method
Matériaux métalliques — Essai de dureté Brinell —
Partie 1:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 6508-1:2023(Main)
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)
SIST EN ISO 6508-1:2024

This document specifies the method for Rockwell regular and Rockwell superficial hardness tests for scales A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, and 45T for metallic materials and is applicable to stationary and portable hardness testing machines.
For specific materials and/or products, other specific International Standards apply (e.g. ISO 3738-1 and ISO 4498).

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6508-2:2023(Main)
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2023)
SIST EN ISO 6508-2:2024

This document specifies two separate methods of verification of testing machines (direct and indirect) for determining Rockwell hardness in accordance with ISO 6508-1, together with a method for verifying Rockwell hardness indenters.
The direct verification method is used to determine whether the main parameters associated with the machine function, such as applied force, depth measurement, and testing cycle timing, fall within specified tolerances. The indirect verification method uses a number of calibrated reference hardness blocks to determine how well the machine can measure a material of known hardness.
This document is applicable to stationary and portable hardness testing machines.
Attention is drawn to the fact that the use of tungsten carbide composite for ball indenters is considered to be the standard type of Rockwell indenter ball.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6508-3:2023(Main)
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023)
SIST EN ISO 6508-3:2024

This document specifies a method for the calibration of reference blocks to be used for the indirect and daily verification of Rockwell hardness testing machines and indenters, as specified in ISO 6508-2. This document also specifies requirements for Rockwell machines and indenters used for calibrating reference blocks and specifies methods for their calibration and verification.
Attention is drawn to the fact that the use of hard metal for ball indenters is considered to be the standard type of Rockwell indenter ball.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6507-1:2023(Main)
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2023)
SIST EN ISO 6507-1:2023

ISO 6507-1:2018 specifies the Vickers hardness test method for the three different ranges of test force for metallic materials including hardmetals and other cemented carbides.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4545-1:2023(Main)
Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2023)
SIST EN ISO 4545-1:2023

ISO 4545-1:2017 specifies the Knoop hardness test method for metallic materials for test forces from 0,009 807 N to 19,613 N.
The Knoop hardness test is specified in this document for lengths of indentation diagonals ≥0,020 mm. Using this method to determine Knoop hardness from smaller indentations is outside the scope of this document as results would suffer from large uncertainties due to the limitations of optical measurement and imperfections in tip geometry. ISO 14577-1 allows the determination of hardness from smaller indentations.
A periodic verification method is specified for routine checking of the testing machine in service by the user.
Special considerations for Knoop testing of metallic coatings can be found in ISO 4516.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 204:2023(Main)
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2023)
SIST EN ISO 204:2023

This document specifies the methods for:
a)    uninterrupted creep tests with continuous monitoring of extension;
b)    interrupted creep tests with periodic measurement of elongation;
c)    stress rupture tests where normally only the time to fracture is measured;
d)    a test to verify that a predetermined time can be exceeded under a given force, with the elongation or extension not necessarily being reported.
NOTE       A creep test can be continued until fracture has occurred or it can be stopped before fracture.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14556:2023(Main)
Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023)
SIST EN ISO 14556:2023

This document specifies a method of instrumented Charpy V-notch pendulum impact testing on metallic materials and the requirements concerning the measurement and recording equipment.
With respect to the Charpy pendulum impact test described in ISO 148-1, this test provides further information on the fracture behaviour of the product under impact testing conditions.
The results of instrumented Charpy test analyses are not directly transferable to structures or components and shall not be directly used in design calculations or safety assessments.
NOTE            General information about instrumented impact testing can be found in References [1] to [5].

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3785:2023(Main)
Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2023)
SIST EN ISO 3785:2023

This document specifies a method for designating test specimen axes in relation to product texture by means of an X-Y-Z orthogonal coordinate system.
This document applies equally to unnotched and notched (or precracked) test specimens.
This document is intended only for metallic materials with uniform texture that can be unambiguously determined.
Test specimen orientation is decided before specimen machining, identified in accordance with the designation system specified in this document, and recorded.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16808:2022(Main)
Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022)
SIST EN ISO 16808:2022

This document specifies a method for determination of the biaxial stress-strain curve of metallic sheets having a thickness below 3 mm in pure stretch forming without significant friction influence. In comparison with tensile test results, higher strain values can be achieved.
NOTE      In this document, the term "biaxial stress-strain curve" is used for simplification. In principle, in the test the "biaxial true stress-true strain curve" is determined.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2566-2:2021(Main)
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-05)
SIST EN ISO 2566-2:2022

This document specifies a method of converting room temperature percentage elongations after fracture obtained on various proportional and non-proportional gauge lengths to other gauge lengths.
Formula (1), on which conversions are based, is considered to be reliable when applied to austenitic stainless steels within the tensile strength range 450 to 750 N/mm2 and in the solution treated condition.
These conversions are not applicable to:
a) cold reduced steels;
b) quenched and tempered steels;
c) non-austenitic steels.
These conversions are not applicable when the gauge length exceeds 25√S0 or where the width to thickness ratio of the test piece exceeds 20.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day