EN 1396:2015
(Main)Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
This European Standard specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 3,0 mm.
It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process both with liquid as well as with powder paints, either in the final width or slit afterwards, and to sheet obtained from such strip.
It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.
Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - Spezifikationen
Diese Europäische Norm legt die besonderen Anforderungen an bandbeschichtete Bleche und Bänder aus Aluminium und Aluminiumlegierungen für allgemeine Anwendungen fest. Diese Erzeugnisse werden üblicher-weise in Dicken bis 3,0 mm geliefert.
Sie gilt für kaltgewalzte Bänder aus Aluminium und Aluminiumlegierungen, die durch ein Bandbeschichtungs-verfahren mit flüssigbasierten oder mit pulverbasierten Lacken beschichtet werden, in Endbreite oder nach der Beschichtung längsgeteilt werden, bzw. für Bleche, die aus diesen Bändern hergestellt werden.
Sie gilt nicht für Sonderanwendungen dieser bandbeschichteten Bleche und Bänder wie beispielsweise Dosen, Verschlüsse und Deckel, die in EN 541 behandelt werden.
Aluminium et alliages d'aluminium - Tôles et bandes revêtues en bobine pour applications générales - Spécifications
La présente Norme européenne spécifie les exigences particulières relatives aux tôles et bandes en aluminium et alliages d'aluminium corroyés revêtues en bobine pour applications générales. Le produit fourni possède généralement une épaisseur allant jusqu'à 3,0 mm.
Elle s'applique aux bandes en aluminium et alliages d'aluminium laminées à froid, revêtues par le procédé de revêtement en bobine avec des peintures liquides et en poudre, en largeur finale ou refendues après revêtement, ainsi qu'aux tôles obtenues à partir de ces bandes.
Elle ne s'applique pas aux tôles et bandes revêtues en bobines et utilisées pour des applications particulières, telles que les produits laminés pour boîtes, capsules rigides et couvercles, qui sont traitées séparément dans l'EN 541.
Aluminij in aluminijeve zlitine - Prevlečena ali premazana pločevina in trakovi za splošno uporabo - Specifikacije
General Information
- Status
- Withdrawn
- Publication Date
- 31-Mar-2015
- Withdrawal Date
- 13-Apr-2025
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 7 - Sheets, strips and plates
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 07-Jun-2023
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 08-Apr-2015
- Effective Date
- 17-Mar-2021
Frequently Asked Questions
EN 1396:2015 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications". This standard covers: This European Standard specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 3,0 mm. It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process both with liquid as well as with powder paints, either in the final width or slit afterwards, and to sheet obtained from such strip. It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.
This European Standard specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 3,0 mm. It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process both with liquid as well as with powder paints, either in the final width or slit afterwards, and to sheet obtained from such strip. It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.
EN 1396:2015 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1396:2015 has the following relationships with other standards: It is inter standard links to EN 1396:2007, EN 1396:2023. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1396:2015 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - SpezifikationenAluminium et alliages d'aluminium - Tôles et bandes revêtues en bobine pour applications générales - SpécificationsAluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1396:2015SIST EN 1396:2015en,fr,de01-junij-2015SIST EN 1396:2015SLOVENSKI
STANDARDSIST EN 1396:20071DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1396
April 2015 ICS 77.150.10 Supersedes EN 1396:2007English Version
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Aluminium et alliages d'aluminium - Tôles et bandes revêtues en bobine pour applications générales - Spécifications
Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - Spezifikationen This European Standard was approved by CEN on 31 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1396:2015 ESIST EN 1396:2015
Contents Page
Foreword . 4 Introduction . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Technical conditions for inspection and delivery . 9 4.1 Ordering information . 9 4.2 Requirements . 11 4.2.1 Production and manufacturing processes . 11 4.2.2 Quality control . 11 4.2.3 Freedom from defects . 11 4.2.4 Chemical composition . 11 4.2.5 Mechanical properties . 11 4.2.6 Tolerances on shape and dimensions . 11 4.2.7 Coating properties . 12 4.3 Test procedures . 12 4.3.1 Chemical composition . 12 4.3.2 Tensile test . 12 4.3.3 Coating tests . 12 4.3.4 Retests . 13 5 Mechanical properties . 13 6 Organic coating properties . 15 6.1 Tolerances on thickness . 15 6.2 Tolerances on gloss . 16 6.3 Tolerances on colour . 17 7 Inspection documents . 17 8 Marking . 17 9 Packing . 17 10 Arbitration tests . 18 Annex A (normative)
Rules for rounding . 19 Annex B (informative)
Examples of coating systems . 20 Annex C (informative)
Guidelines for organic coatings . 22 C.1 General . 22 C.2 Colour . 22 C.3 Flexibility . 22 C.4 Adhesion. 23 C.5 Pencil hardness . 24 C.6 Durability of the organic coating . 24 C.6.1 General . 24 C.6.2 Corrosion resistance (outdoor exposure) . 26 SIST EN 1396:2015
Guidelines for storage and subsequent processing . 30 D.1 Storage . 30 D.2 General instructions for processing . 30 D.3 Forming . 30 D.4 Cutting . 30 D.5 Joining . 31 D.6 Cleaning . 31 D.7 Temporary protective films . 31 Bibliography . 32
2) for the reverse side:
1) If the surface is likely to be damaged during transportation, storage, processing or erection, the coil coated material may, on agreement, be supplied with the additional protection of a temporary strippable film. Type, thickness, adhesion properties, formability, tear strength and light fastness are to be taken into consideration when choosing protective films. Only certain protective films can be exposed to outdoor weathering, and these only for a limited period. SIST EN 1396:2015
O 100 145 35 15 19 20 H42 125 165 80 4 5 6 H44 145 185 110 3 4 5 H46 165 205 135 2 3 4 H48 185 — 160 1 2 3 EN AW-5006 [Al Mg1Mn0,5] H41 140 190 105 7 7 8 H48 200 250 180 3 3 3 H49 200 — 190 2 2 2 EN AW-5010 [Al Mg0,5Mn] H42 110 150 90 5 5 6 H44 130 170 100 3 3 4 H45 140 180 110 2 2 3 H46 150 190 120 2 2 3 H48 170 210 140 1 1 2 EN AW-5050 [Al Mg1,5(C)] H44 170 215 130 3 4 5 H46 190 235 160 2 3 4 H48 210
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...