prEN 9300-010

SLOVENSKI STANDARD
01-januar-2025
Aeronavtika - LOTAR - Dolgotrajno arhiviranje in iskanje digitalne tehnične
dokumentacije o izdelkih, kot so podatki o 3D, CAD in PDM - 010. del: Pregled
podatkov
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical
product documentation such as 3D, CAD and PDM data - Part 010: Overview data flow
Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und Bereitstellung digitaler
technischer Produktdokumentationen, wie zum Beispiel von 3D-, CAD- und PDM-Daten -
Teil 010: Übersicht des Datenflusses
Série aérospatiale - LOTAR - Archivage Long Terme et récupération des données
techniques produits numériques, telles que CAD 3D et PDM - Partie 010 : Vue générale
du flux de données
Ta slovenski standard je istoveten z: prEN 9300-010
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
35.240.10 Računalniško podprto Computer-aided design
snovanje (načrtovanje, (CAD)
oblikovanje) (CAD)
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2024
ICS 01.110; 35.240.10; 35.240.30; 49.020 Will supersede EN 9300-010:2018
English Version
Aerospace series - LOTAR - LOng Term Archiving and
Retrieval of digital technical product documentation such
as 3D, CAD and PDM data - Part 010: Overview data flow
Série aérospatiale - LOTAR - Archivage Long Terme et Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung
récupération des données techniques produits und Bereitstellung digitaler technischer
numériques, telles que CAD 3D et PDM - Partie 010 : Produktdokumentationen, wie zum Beispiel von 3D-,
Vue générale du flux de données CAD- und PDM-Daten - Teil 010: Übersicht des
Datenflusses
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 9300-010:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Applicability . 5
5 Overview of data flow . 6
6 Detailed process steps description . 7
6.1 Data preparation . 7
6.2 Ingest . 7
6.3 Archival storage . 7
6.4 Retrieval . 7
6.5 Removal . 8
6.6 Ingest of pre-existing data . 8
7 Data descriptions . 8
7.1 Involved roles . 8
7.1.1 Archive . 8
7.1.2 Producer . 8
7.1.3 Consumer . 9
7.2 Involved data . 9
7.2.1 General. 9
7.2.2 Submission information package (SIP). 9
7.2.3 Archival information package (AIP) . 9
7.2.4 Dissemination information package (DIP) . 9
7.2.5 Copy of the AIP . 10
Bibliography . 11

European foreword
This document (prEN 9300-010:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 9300-010:2018.
This document includes the following significant technical changes with respect to EN 9300-010:2018:
— complete revision.
Introduction
This document was prepared jointly by AIA, ASD-STAN, PDES, Inc., AFNet and the prostep ivip
Association.
The AFNeT non-profit association has operated for more than 30 years a multi-sectoral “Think Tank”
articulated with a “Do Tank”, with digital transformation projects or standardization projects in many
industries. These activities have led to the emergence of a network of recognized and highly skilled
actors from the manufacturing industry, IT businesses, and research companies. Its members represent
leading industrial companies, SMEs, French governmental agencies, software vendors, universities, and
research organizations. AFNeT has conducted voluntary and innovative actions in order to develop
competitiveness and innovation in industry by setting up collaboration projects or programs in the
industrial sectors (Aerospace & Defence, Automotive, Rail, Shipbuilding, Nuclear, Energy, etc.) to enable
the digital thread for the extended enterprise processes such as Product Lifecycle Management, Supply-
Chain Management, Manufacturing, Maintenance & Operations, Integrated Logistics Support, and
Identification. AFNet promotes the development, testing and usage of a set of coherent international
standards for supporting these activities, especially in the PLM and the SCM domains.
The prostep ivip Association is an international non-profit association in Europe. For establishing
leadership in IT-based engineering it offers a moderated platform to its nearly 200 members from
leading industries, system vendors and research institutions. Its product and process data
standardization activities at European and worldwide levels are well known and accepted. The prostep
ivip Association sees this standard and the related parts as a milestone of product data technology.
PDES, Inc. is an international non-profit association in USA. The mission of PDES, Inc. is to accelerate the
development and implementation of ISO 10303 series, enabling enterprise integration and PLM
interoperability for member companies. PDES, Inc. gathers members from leading manufacturers,
national government agencies, PLM vendors and research organizations. PDES, Inc. supports this
standard as an industry resource to sustain the interoperability of digital product information, ensuring
and maintaining authentic longevity throughout their product lifecycle.
Readers of this document should note that all standards undergo periodic revisions and that any
reference made herein to any other standard implies its latest edition, unless otherwise stated.
The Standards will be published under two different standards organizations using different prefixes.
ASD-STAN will publish the standard under the number EN 9300–xxx. AIA will publish the standard
under the number NAS 9300–xxx. The content in the EN 9300 series and NAS 9300 series will be the
same. The differences will be noted in the reference documentation (i.e. for EN 9300 Geometric
Dimensioning & Tolerancing will be referenced in ISO 1101 and ISO 16792, and for NAS 9300 the same
information will be referenced in ASME Y14.5 and ASME Y14.41). The document formatting etc., will
follow that of the respective editorial rules of ASD-STAN and AIA.
1 Scope
This document provides an overview description for the recommended processes for archiving of
model based product data, e.g. 3D CAD and PDM data. The detailed processes are described in
additional process parts of the EN 9300 series.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 9300-007, Aerospace series — LOTAR — LOng Term Archiving and Retrieval of digital technical
product documentation such as 3D, CAD and PDM data — Part 007: Terms and references
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 9300-007 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
4 Applicability
This document is applicable to new model based product data records and may be applicable to existing
model based product data records, on current and earlier products, produced using previous
regulations, standards and procedures. The current version is focused on product data as defined in the
domain specific parts.
5 Overview of data flow
Figure 1 — Data flow
The overview data flow is divided into several phases.
This includes the phases:
— Data generation;
— Data preparation;
— Ingest;
— Ingest of pre-existing data;
— Archival storage;
— Retrieval;
— Data Usage;
— Removal.
The overview is organized along the life cycle of the data to be archived. For the generated data the
producer has to prepare the data for archiving. After data preparation the resulting submission
information package (SIP) will be send during an Ingest process to the archive system. Within the
archival storage process the SIP will be converted into an archival information package (AIP). This
includes the conversion of native formatted product data
...