EN 14020-3:2002
(Main)Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
This part of this European Standard gives a technical specification for rovings that are made from continuous filament textile glass. It defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defined by the manufacturer but this specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer.
The parameters which shall always be defined in any roving specification are defined in clause 4.1 and 4.2. The other parameters which are included in a specification shall either be nominated by the manufacturer or agreed between manufacturer and customer. These parameters are defined in clause 4.3.
Verstärkungsfasern - Spezifikation für Textilglasrovings - Teil 3: Besondere Anforderungen
Renforts - Spécification des stratifils (rovings) de verre textile - Partie 3: Exigences spécifiques
Ojačitve - Specifikacije za snopiče (roving) steklenih vlaken - 3. del: Posebne zahteve
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]DKWHYHVerstärkungsfasern - Spezifikation für Textilglasrovings - Teil 3: Besondere AnforderungenRenforts - Spécification des stratifils (rovings) de verre textile - Partie 3: Exigences spécifiquesReinforcements - Specification for textile glass rovings - Part 3: Specific requirements59.100.10Materiali iz steklenih vlakenTextile glass materialsICS:Ta slovenski standard je istoveten z:EN 14020-3:2002SIST EN 14020-3:2003en01-maj-2003SIST EN 14020-3:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14020-3December 2002ICS 59.100.10English versionReinforcements - Specification for textile glass rovings - Part 3:Specific requirementsRenforts - Spécification des stratifils (rovings) de verretextile - Partie 3: Exigences spécifiquesVerstärkungsfasern - Spezifikation für Textilglasrovings -Teil 3: Besondere AnforderungenThis European Standard was approved by CEN on 7 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14020-3:2002 ESIST EN 14020-3:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.