EN 14020-2:2002
(Main)Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements
Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements
This part of this European Standard defines test methods to be used to determine designated and specified properties given in Part 1 and 3, respectively. It defines general requirements applicable to the specification of all types of glass fibre rovings falling within the scope of this specification as defined in Part 1 of the standard.
Verstärkungsfasern - Spezifikation für Textilglasrovings - Teil 2: Prüfverfahren und allgemeine Anforderungen
Renforts - Spécification des stratifils (rovings) de verre textile - Partie 2: Méthodes d'essai et exigences générales
Ojačitve - Specifikacije za snopiče (roving) steklenih vlaken - 2. del: Preskusne metode in splošne zahteve
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verstärkungsfasern - Spezifikation für Textilglasrovings - Teil 2: Prüfverfahren und allgemeine AnforderungenRenforts - Spécification des stratifils (rovings) de verre textile - Partie 2: Méthodes d'essai et exigences généralesReinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements59.100.10Materiali iz steklenih vlakenTextile glass materialsICS:Ta slovenski standard je istoveten z:EN 14020-2:2002SIST EN 14020-2:2003en01-maj-2003SIST EN 14020-2:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14020-2December 2002ICS 59.100.10English versionReinforcements - Specification for textile glass rovings - Part 2:Methods of test and general requirementsRenforts - Spécification des stratifils (rovings) de verretextile - Partie 2: Méthodes d'essai et exigences généralesVerstärkungsfasern - Spezifikation für Textilglasrovings -Teil 2: Prüfverfahren und allgemeine AnforderungenThis European Standard was approved by CEN on 7 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14020-2:2002 ESIST EN 14020-2:2003
14020 which is structured as follows:¾ Part 1: Designation¾ Part 2: Test methods and general requirements¾ Part 3: Specific requirementsAccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 14020-2:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.