EN 14020-1:2002
(Main)Reinforcements - Specification for textile glass rovings - Part 1: Designation
Reinforcements - Specification for textile glass rovings - Part 1: Designation
This part of this European Standard establishes a method of designation for roving made from continuous filament textile glass strands, which may be used as the basis for specifications.
This designation system is for roving used for the reinforcement of plastics and hydraulic matrices, and the manufacture of woven materials.
It does not apply to roving made from staple fibres.
It is not intended to imply that roving having the same designation give necessarily the same performance. Nor is the designation system intended to cover all the characteristics of roving. This part of this European Standard does not give engineering data, performance data or data which may be required to specify roving for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in Part 2 of EN 14020.
Verstärkungsfasern - Spezifikation für Textilglasrovings - Teil 1: Bezeichnung
Renforts - Spécification des stratifils (rovings) de verre textile - Partie 1: Désignation
Ojačitve - Specifikacije za snopiče (roving) steklenih vlaken - 1. del: Označevanje
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verstärkungsfasern - Spezifikation für Textilglasrovings - Teil 1: BezeichnungRenforts - Spécification des stratifils (rovings) de verre textile - Partie 1: DésignationReinforcements - Specification for textile glass rovings - Part 1: Designation59.100.10Materiali iz steklenih vlakenTextile glass materialsICS:Ta slovenski standard je istoveten z:EN 14020-1:2002SIST EN 14020-1:2003en01-maj-2003SIST EN 14020-1:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14020-1December 2002ICS 59.100.10English versionReinforcements - Specification for textile glass rovings - Part 1:DesignationRenforts - Spécification des stratifils (rovings) de verretextile - Partie 1: DésignationVerstärkungsfasern - Spezifikation für Textilglasrovings -Teil 1: BezeichnungThis European Standard was approved by CEN on 7 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14020-1:2002 ESIST EN 14020-1:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.